Materials engineering topic list of research papers
-
Investigating Components Affecting the Resource Efficiency of Incorporating Metal Additive Manufacturing in Process Chains
Abstract Pursuing more sustainable process chains, manufacturers are constantly striving to enhance the resource efficiency of their manufacturing processes. As part of this, additive technologies have become increasingly important for reducing...
2017 / Richard Girdwood, Martin Bezuidenhout, Philip Hugo, Pieter Conradie, Gert Oosthuizen, et al. -
Study of Application of Vibration Isolators with Quasi-zero Stiffness for Reducing Dynamics Loads on the Foundation
Abstract Influence of dynamic force of machines on its foundation is analyzed. Decrease of dynamic force can greatly decrease amount of concrete required for foundation construction. Application of different types of vibration isolators is analyzed. ...
2017 / Valeev Anvar, Zotov Alexey, Tokarev Artem -
Tensile deformation behavior of tungsten fibre-reinforced tungsten composite specimens in as-fabricated state
Abstract To overcome the inherent brittleness of tungsten, which is a promising candidate for a plasma-facing material in a future fusion device, tungsten fibre-reinforced tungsten composites (W f /W)...
2017 / H. Gietl, J. Riesch, J.W. Coenen, T. Höschen, Ch. Linsmeier, et al. -
Comparative study on deformation and mechanical behavior of corroded pipe: Part I–Numerical simulation and experimental investigation under impact load2017 / Dong-Man Ryu, Lei Wang, Seul-Kee Kim, Jae-Myung Lee
-
Changes In Properties and Microstructure of High-Chromium 9-12%Cr Steels Due to Long-Term Exposure at Elevated Temperature2016 / A. Zieliński, J. Dobrzański, H. Purzyńska, G. Golański
-
High field-effect mobility at the (Sr,Ba)SnO3/BaSnO3 interface2016 / Kohei Fujiwara, Kazuki Nishihara, Junichi Shiogai, Atsushi Tsukazaki
-
Study on Fiber Laser Welding of AA6061-T6 Samples through Numerical Simulation and Experiments
Abstract A three-dimensional finite element model based on thermo-elastic-plastic model is applied to simulate the temperature and residual stress of aluminum alloy joint weld during fiber laser welding. Transient temperature, residual stress field, ...
2017 / C. Su, J.Z. Zhou, Y.X. Ye, S. Huang, X.K. Meng -
Structural properties of highly conductive ultra-nanocrystalline diamond films grown by hot-filament CVD2017 / M. Mertens, I.-N. Lin, D. Manoharan, A. Moeinian, K. Brühne, et al.
-
Conducting interface states at LaInO3/BaSnO3 polar interface controlled by Fermi level2016 / Useong Kim, Chulkwon Park, Young Mo Kim, Juyeon Shin, Kookrin Char
-
Comparing Nonlinear Free Vibrations of Timoshenko Beams with Mechanical or Geometric Curvature Definition
Abstract The nonlinear free oscillations of a planar, initially straight Timoshenko beam are investigated by means of the asymptotic development method. Attention is focus on the difference in considering the “mechanical” vs the “geometric”...
2017 / Stefano Lenci, Francesco Clementi, Giuseppe Rega -
Novel solid – solid phase change material based on polyethylene glycol and cellulose used for temperature stabilisation2014 / Marta Wojda, Tadeusz M. Wójcik
-
Cymbiola nobilis shell: Toughening mechanisms in a crossed-lamellar structure2017 / Hongmei Ji, Xiaowu Li, Daolun Chen
-
The steady and vibrating statuses of tulip tree leaves in wind
Abstract The study of tree leaf aerodynamics is useful to tree protection, solar panel design and development of new power generation technology. 73 tulip leaves were tested in suspended condition and with front as well as back surface of the lamina ...
2017 / Yuanyuan Zhu, Chuanping Shao -
Thickness dependence of solid-state single crystal conversion in magnetostrictive Fe-Ga alloy from thin foil to thick sheet2016 / Suok-Min Na, Alison Flatau
-
A Concise Design for the Irradiation of U–10Zr Metallic Fuel at a Very Low Burnup
Abstract In order to investigate the swelling behavior and fuel–cladding interaction mechanism of U–10Zr alloy metallic fuel at very low burnup, an irradiation experiment was concisely designed and conducted on the China Mianyang Research Reactor....
2017 / Haibing Guo, Wei Zhou, Yong Sun, Dazhi Qian, Jimin Ma, et al. -
Improving of Acoustic Emission Signal Detection for Fatigue Fracture Monitoring
Abstract Identifying growing cracks in running machinery and industrial facilities is challenging, particularly at the nucleation stage in “hard-to-reach” places and in harsh environment. The method of acoustic emission is a popular non-destructive...
2017 / A. Danyuk, I. Rastegaev, E. Pomponi, M. Linderov, D. Merson, et al. -
Systems code studies on the optimization of design parameters for a pulsed DEMO tokamak reactor
Abstract In the European strategy towards fusion power, a demonstration tokamak fusion reactor (DEMO) is foreseen as the next single step between ITER and a power plant. The current baseline concept is a tokamak reactor with net electrical output...
2017 / W. Biel, M. Beckers, R. Kemp, R. Wenninger, H. Zohm -
Analysis of reaction between c+a and -c+a dislocations in GaN layer grown on 4-inch Si(111) substrate with AlGaN/AlN strained layer superlattice by transmission electron microscopy2016 / Yoshihiro Sugawara, Yukari Ishikawa, Arata Watanabe, Makoto Miyoshi, Takashi Egawa
-
A novel procedure for the identification of chaos in complex biological systems2017 / D. Bazeia, M. B. P. N. Pereira, A. V. Brito, B.F. de Oliveira, J. G. G. S. Ramos
-
Feasibility Studies on the Cooling of Hybrid Rocket Nozzles Using Supercritical Nitrous Oxide
Abstract The fundamental requirement in the development of Single-Stage-To-Orbit (SSTO) system is to implement a nozzle contour with altitude compensation characteristics which leads to increase in aerodynamic efficiencies. Also, the reusability of...
2017 / Abhinav Kumar, Vishnu Saini, Preeti Rao Usurumarti, Raja Sekhar Dondapati