Materials engineering topic list of research papers
-
Factorial Design based Optimisation of Crevice Corrosion for Type 304 Stainless Steel in Chloride Solutions2016 / O.O. Ogunleye, A.G. Adeniyi, M.O. Durowoju
-
Exergy Based Analysis of LiCl-H 2 O Absorption Cooling System
Abstract A thermodynamic analysis of single effect LiCl-H2O vapour absorption cooling system of 1 TR capacity is conducted based on first and second laws. Mathematical models derived from thermodynamics theory, are employed in engineering equation...
2017 / Jatin Patel, Bhargav Pandya, Anurag Mudgal -
On Different Engineering Ideas of Eco-designer Resource-saving Studies of Effective Sound-absorbing Substances and Noise-reducing Constructions
Abstract The article represents offered for use resource-preservation conceptions of effective sound-absorbing substances and noise-reducing constructions which are based on ecologically clean («green») techniques of recycled recovery of hard...
2017 / Michael I. Fesina, Alexander V. Krasnov, Larisa N. Gorina -
Pressure-induced Td to 1T′ structural phase transition in WTe22016 / Yonghui Zhou, Xuliang Chen, Nana Li, Ranran Zhang, Xuefei Wang, et al.
-
Effects of Dy sub lattice dilution on transport and magnetic properties in Dy1-xKxMnO32017 / K. Yadagiri, R. Nithya, Neeraj Shukla, A. T. Satya
-
The Muffler Performance Effect on Pressure Reducing Valve Dynamics
Abstract The gas pressure control units are widely used for various applications. Very often such units operate at large flow rates and pressure drops, thus becoming a powerful noise sources. The problem of noise reduction and protection is a...
2017 / Dmitry M. Stadnik, Alexander A. Igolkin, Victor Y. Sverbilov, Kirill M. Afanasev -
Research on Semi-Automatic Bomb Fetching for an EOD Robot2012 / Zeng Jian-Jun, Yang Ru-Qing, Zhang Wei-Jun, Weng Xin-Hua, Qian Jun
-
Effect of metal shielding on a wireless power transfer system2017 / Jiacheng Li, Xueliang Huang, Chen Chen, Linlin Tan, Wei Wang, et al.
-
Prediction of Thermal Performance of Unidirectional Flow Porous Bed Solar Air Heater with Optimal Training Function Using Artificial Neural Network
Abstract In the present work, Artificial Neural Network (ANN) has been used to predict the thermal performance of unidirectional flow porous bed solar air heater. The ANN model was structured on the basis of data sets obtained from experiments and...
2017 / Harish Kumar Ghritlahre, Radha Krishna Prasad -
Protein Mechanics: From Amino Acid to Swimming Cells
Abstract This proceedings paper contains a review of the work presented in the Sectional Lecture in Solids on August 25 at ICTAM 2016. -- Proteins are long polypeptide chains of amino acids and their structure and biological function are directly...
2017 / Patrick Onck -
Influence of initial imperfections on ultimate strength of spherical shells2017 / Chang-Li Yu, Zhan-Tao Chen, Chao Chen, Yan-ting Chen
-
Self-assembled growth and structural analysis of inclined GaN nanorods on nanoimprinted m-sapphire using catalyst-free metal-organic chemical vapor deposition2016 / Kyuseung Lee, Sooryong Chae, Jongjin Jang, Daehong Min, Jaehwan Kim, et al.
-
Application of Artificial Intelligence Methods to Modeling of Injector Needle Movement in Diesel Engine
Abstract The paper presents analysis of injector needle movement in diesel engine. A methodology for obtaining models of this movements was described. The values of injector needle lift were recorded for the engine running at full load, powered by...
2017 / Michał Kekez, Leszek Radziszewski, Alžbeta Sapietova -
Soft Computing Techniques for a Solar Collector Using Solar Radiation Data
Abstract Prediction of solar radiation data using different soft computing approaches like Multi layer Perceptron (MLP), Artificial Neuro Fuzzy Inference System (ANFIS), and Radial Basis Function (RBF) for East coast region of India has been...
2017 / Sthita Pragyan Mohanty, Auroshis Rout, Prashanta Kumar Patra, Sudhansu S. Sahoo -
Electrochemical hydrogen storage properties of Mg 100−x Ni x produced by hydriding combustion synthesis and mechanical milling
Abstract In this work, Mg-based hydrogen storage composites with an initial 100-x: x (x=25, 32.3, 50, 66.7) of Mg:Ni molar ratio were prepared by HCS+MM and their phase compositions and electrochemical performances were investigated in detail. The...
2017 / Delong Zhu, Jiguang Zhang, Yunfeng Zhu, Yao Zhang, Yana Liu, et al. -
Realization of palladium-based optomechanical cantilever hydrogen sensor2017 / Steven J. McKeown, Xiaozhen Wang, Xin Yu, Lynford L. Goddard
-
Tritium modelling in HCPB breeder blanket at a system level
Abstract Tritium behavior in a DEMO reactor is a key design issue because of its self-sufficiency and impact on safety. Considering the difficulty in handling tritium, and that the transport, diffusion and permeation phenomena involve a large number ...
2017 / Elisabeta Carella, Carlos Moreno, Fernando Roca Urgorri, David Rapisarda, Ángel Ibarra -
The Hide-and-Seek of Grain Boundaries from Moiré Pattern Fringe of Two-Dimensional Graphene2015 / Jung Hwa Kim, Kwanpyo Kim, Zonghoon Lee
-
Measurement of rotational magnetic properties of nanocrystalline alloys by a modified B-H sensor2016 / Long Chen, Youhua Wang, Zhenghan Zhao, Hanyu Zhao, Chengcheng Liu
-
A Review of Nano Fluid Role to Improve the Performance of the Heat Pipe Solar Collectors
Abstract This paper gives a comprehensive review about the recent advances related with the application of the nano fluid in the heat pipe solar collectors. Papers reviewed including theoretical, numerical and experimental up to date works related...
2017 / Ahmed Kadhim Hussein, Dong Li, Lioua Kolsi, Sanatana Kata, Brundaban Sahoo