Materials engineering topic list of research papers
-
Energy Management in a Manufacturing Industry through Layout Design
Abstract Competitive market and effective utilization of available resources are the driving forces towards “Energy Management”. In a manufacturing facility, energy management is often neglected due to some wrong perceptions including high initial...
2017 / Muhammad Fahad, Syed Asad Ali Naqvi, Muhammad Atir, Muhammad Zubair, Muhammad Musharaf Shehzad -
Performance Investigation of Natural Refrigerant R290 as a Substitute to R22 in Refrigeration Systems
Abstract Use of natural refrigerant R290 can play a vital role in fulfilling the objectives of the international protocols like Montreal and Kyoto. Because of environmental problems such as ozone depletion and global warming, R22 needs to be phased...
2017 / C.S. Choudhari, S.N. Sapali -
Enabling Circular Economy Through Product Stewardship
Abstract Sustainable manufacturing extends beyond the manufacturing process and the product, to include the supply chain, across multiple product life-cycles as well as end-of-life considerations. Companies can gain a competitive advantage by...
2017 / J.P. Jensen, A. Remmen -
Implementation of a Hyperchaotic System with Hidden Attractors into a Microcontroller2016 / Angelos E. Giakoumis, Christos K. Volos, Ioannis N. Stouboulos, Ioannis K. Kyprianidis
-
ZnSe Light Emitting Diode Quantum Efficiency and Emission Characterization2016 / U.K. Sahbudin, M.H.A. Wahid, P. Poopalan, N.A.M.A. Hambali, M.M. Shahimin, et al.
-
Influence of Mushy Zone Constant on Thermohydraulics of a PCM
Abstract PCM (Phase Change Material) can be considered as an attractive option for thermal energy storage due to its high energy density and isothermal process. The understanding of melting characteristics of a PCM is very much necessary for the...
2017 / Mathura Kumar, D. Jaya Krishna -
Impact testing Facility: BHISM for Performance Based Design of Reinforced Concrete (RC) Structures
Abstract This research deals with the design and development of Blast and Heavy Impact Simulation mechanism (BHISM) for generating high fidelity data for impact resistant design, testing and validation of reinforced concrete structures...
2017 / G. Jasawanth, Suman Kumar, Hrishikesh Sharma -
Design of (Nb, Mo)40Ti30Ni30 alloy membranes for combined enhancement of hydrogen permeability and embrittlement resistance2017 / Xinzhong Li, Xiao Liang, Dongmei Liu, Ruirun Chen, Feifei Huang, et al.
-
Effect of square wings in multiple square perforated twisted tapes on fluid flow and heat transfer of heat exchanger tube
Abstract This work presents, an experimental study on Nusselt number ( Nu rs ...
2017 / Amar Raj Singh Suri, Anil Kumar, Rajesh Maithani -
Different Techniques of Determination of the Cracking Criterion for Solidification in Casting
Abstract Cracking which occurs during the solidification process is a serious defect in castings and welds. Alloys are susceptible to cracking during solidification. Al alloys, stainless steels and Ni-base alloys are notable examples. Cracking takes ...
2017 / Elzbieta Gawronska -
Fluctuations in the Process Plant as a Quality Assessment Criterion of Low-temperature Plasma Hardening Process
Abstract The paper presents the results of experimental studies of the vibrational processes in low temperature plasma hardening. The relationship between the pulsations of a plasma cloud, generator electrical fluctuations of microwave energy and...
2017 / V. Martynov, B. Brzhozovsky, E. Zinina, I. Yankin, A. Susskiy -
HgCdTe-based heterostructures for terahertz photonics2017 / S. Ruffenach, A. Kadykov, V. V. Rumyantsev, J. Torres, D. Coquillat, et al.
-
Tunable doping in PbS nanocrystal field-effect transistors using surface molecular dipoles2016 / Mohamad I. Nugraha, Hiroyuki Matsui, Satria Z. Bisri, Mykhailo Sytnyk, Wolfgang Heiss, et al.
-
Effect of annealing conditions on the molecular properties and wetting of viscoelastic bitumen substrates by liquids
Abstract Typically, in the production of asphalt concrete, bitumen and mineral aggregates are heated and mixed at temperatures above 100°C. After the mixing process bitumen ideally coats the mineral aggregates and remains in the form of thin films....
2017 / Salomé dos Santos, Lily D. Poulikakos, Manfred N. Partl -
The determining factor of a preferred orientation of GaN domains grown on m-plane sapphire substrates2015 / Miyeon Jue, Cheol-Woon Kim, Seoung-Hun Kang, Hansub Yoon, Dongsoo Jang, et al.
-
Vision-aided system for obtaining a required weight by efficient choice of irregular fragments
Abstract There are some situations when it is necessary to weigh, with high accuracy and high precision, a required amount of material using heterogeneous and irregular pieces. As an example, in the laboratory, when preparing a liquid phase...
2017 / Francisco Sánchez Niño, Victor Hugo Compeán Jasso, Francisco Javier De Anda Salazar, Carlos Soubervielle Montalvo, Juan Carlos Muñoz -
Design and analysis of a self-biased broadband magnetoelectric cantilever operated at multi-frequency windows2017 / J. N. Ma, C. Z. Xin, J. Ma, Y. H. Lin, C. W. Nan
-
Thermodynamic Modelling and Parametric Study of a Two Stage Compression-Absorption Refrigeration System for Ice Cream Hardening Plant
Abstract The present communication introduces a new concept of Two Stage Vapor Compression-Absorption Cascade Refrigeration System (TSVCACRS) for achieving low temperature industrial cooling. The system comprises of Two Stage Vapor Compression...
2017 / Bhavesh Patel, Surendra Singh Kachhwaha, Bhaumik Modi -
Materials Design on the Origin of Gap States in a High-κ/GaAs Interface
ABSTRACT Given the demand for constantly scaling microelectronic devices to ever smaller dimensions, a SiO2 gate dielectric was substituted with a higher dielectric-constant material, Hf(Zr)O2, in order to minimize current leakage through dielectric ...
2015 / Weichao Wang, Cheng Gong, Ka Xiong, K.C. Santosh, Robert M. Wallace, et al. -
Ni ohmic contacts to n-type Ge1−x−ySixSny using phosphorous implant and segregation2015 / Suyuan Wang, Jun Zheng, Chunlai Xue, Chuanbo Li, Yuhua Zuo, et al.