Materials engineering topic list of research papers
-
Development of Autonomous Radiation Mapping Robot
Abstract This paper discusses the development of a spatial radiation map by an autonomous mobile robot that is equipped with Geiger Muller sensor. Mapping of gamma radiation autonomously using robot as agents will help to prevent harm to human...
2017 / Abd. Hafiz Zakaria, Yasir M. Mustafah, Jaafar Abdullah, Nahrul Khair, Taufiq Abdullah -
Analysis of reconfigurable assembly system framing systems in automotive industry2016 / Mohamad Zamri Md Zain, Ahmad Majdi Abdul Rani, Mohd Amin Abd Majid
-
Automated valve fault detection based on acoustic emission parameters and support vector machine
Abstract Reciprocating compressors are one of the most used types of compressors with wide applications in industry. The most common failure in reciprocating compressors is always related to the valves. Therefore, a reliable condition monitoring...
2017 / Salah M. Ali, K.H. Hui, L.M. Hee, M. Salman Leong -
Identification of in-line defects and failures during Additive Manufacturing Powder Bed Fusion processes2017 / Simina Fulga, Arjana Davidescu, Ira Effenberger
-
Kaolin Geopolymer as Precursor to Ceramic Formation2016 / Nur Ain Jaya, Mohd Mustafa Al Bakri Abdullah, Che Mohd Ruzaidi Ghazali, Mohammed Hussain, Kamarudin Hussin, et al.
-
Concurrently coupled solid shell based adaptive multiscale method for fracture
Abstract A solid shell-based adaptive atomistic–continuum numerical method is herein proposed to simulate complex crack growth patterns in thin-walled structures. A hybrid solid shell formulation relying on the combined use of the enhanced assumed...
2017 / P.R. Budarapu, J. Reinoso, M. Paggi -
Preparation and Characterization of Graphene Oxide / Cellulose Triacetate Forward Osmosis Membranes2016 / Fang Li, Meilei Sun, Qianxun Cheng, Bo Yang
-
Core-shell structured titanium-nitrogen alloys with high strength, high thermal stability and good plasticity2017 / Y. S. Zhang, Y. H. Zhao, W. Zhang, J. W. Lu, J. J. Hu, et al.
-
Modal and Harmonic Response Analysis of Key Components of Ditch Device Based on ANSYS
Abstract This paper presents a ditch device which is suitable for being used in rainy area. It can effectively reduce field work frequency by installing such device on a seeder. Through conducting ANSYS-based modal analysis for such ditch device, we ...
2017 / Yongchang Yu, Shuaijun Zhang, He Li, Xiaofei Wang, Yadong Tang -
Double-layer buffer template to grow commensurate epitaxial BaBiO3 thin films2016 / Han Gyeol Lee, Yoonkoo Kim, Sangwoon Hwang, Gideok Kim, Tae Dong Kang, et al.
-
Effect of Building Height on Microstructure and Mechanical Properties of Big-Sized Ti-6Al-4V Plate Fabricated by Electron Beam Melting2015 / Pan Wang, Mui Ling Sharon Nai, Wai Jack Sin, Jun Wei
-
Observing in space and time the ephemeral nucleation of liquid-to-crystal phase transitions2015 / Byung-Kuk Yoo, Oh-Hoon Kwon, Haihua Liu, Jau Tang, Ahmed H. Zewail
-
Damage Tolerance of Carbon Fiber Woven Composite Doped with MWCNTs under Low-velocity Impact
Abstract Fiber reinforced polymer (FRP) composites have versatile application as advanced structural material in many industries. Light weight, high aspect ratio with unique mechanical, electrical, thermal properties make it future of advanced...
2017 / Prashant Rawat, Kalyan Kumar Singh -
Correlation between strain rate sensitivity and α relaxation of metallic glasses2016 / M. Zhang, Y. J. Wang, L. H. Dai
-
Microstructure And Mechanical Properties Of An Al-Zn-Mg-Cu Alloy Produced By Gravity Casting Process2015 / S. Saikawa, G. Aoshima, S. Ikeno, K. Morita, N. Sunayama, et al.
-
Study of kerf geometry of multilayers materials in abrasive water jet cutting process2017 / Bogdan Barabas, Andrea Deaconescu
-
A Simulation Based Approach to Model Design Influence on the Fatigue Life of a Vented Brake Disc
Abstract The brake disc is considered a safety critical components in vehicles, hence the growing concern on its service life performance. Brake disc performance is measured by several criteria of which prominent amongst these criteria is fatigue...
2017 / Ebiakpo Kakandar, Rajkumar Roy, Jörn Mehnen -
Effect of one-step recrystallization on the grain boundary evolution of CoCrFeMnNi high entropy alloy and its subsystems2016 / Bo-Ru Chen, An-Chou Yeh, Jien-Wei Yeh
-
A High-efficiency Thermoelectric Module with Phase Change Material for IoT Power Supply
Abstract For a sensing system to detect the early signs of overflows in sewer systems, we fabricate a high-efficiency module with a thermoelectric generator (TEG) to utilize the temperature of a manhole cover as a heat source. In order to increase...
2017 / K. Nakagawa, T. Suzuki -
Analyzing the kinetic response of tin oxide-carbon and tin oxide-CNT composites gas sensors for alcohols detection2015 / Vinayak Kamble, Arun Umarji