Materials engineering topic list of research papers
-
Super-strengthening and stabilizing with carbon nanotube harnessed high density nanotwins in metals by shock loading2015 / Dong Lin, Mojib Saei, Sergey Suslov, Shengyu Jin, Gary J. Cheng
-
Electric field controlled spin interference in a system with Rashba spin-orbit coupling2016 / Orion Ciftja
-
A lightweight low-frequency sound insulation membrane-type acoustic metamaterial2016 / Kuan Lu, Jiu Hui Wu, Dong Guan, Nansha Gao, Li Jing
-
Hierarchical honeycomb auxetic metamaterials2015 / Davood Mousanezhad, Sahab Babaee, Hamid Ebrahimi, Ranajay Ghosh, Abdelmagid Salem Hamouda, et al.
-
Dislocations in a Ni-based superalloy during low temperature creep2014 / Catherine Rae, Vassili Vorontsov, Libor Kovarik, Michael Mills
-
Application of the dynamic characterization of metals in automotive industry2015 / Fabio D'Aiuto, Daniele De Caro, Claudio Federici, Michele M. Tedesco, Alessandro Ziggiotti, et al.
-
Acid Activation of Natural Zeolite with High Content of Iron Oxides in Creation of Selective Sorbents and Catalysts2017 / Kairat Kadirbekov, Dauren Zhambakin, Almaz Kadirbekov, Kylysh Imanbekov
-
Heterogeneous flow during high-pressure torsion2013 / Roberto B. Figueiredo, Terence G. Langdon
-
Geometry modulated upconversion photoluminescence of individual NaYF4: Yb3+, Er3+ microcrystals2017 /
-
Creep Constitutive Models Suitable for Solder Alloys in Electronic Assemblies2016 / Subhasis Mukherjee, Mohammed Nuhi, Abhijit Dasgupta, Mohammad Modarres
-
Fast ion conductivity in strained defect-fluorite structure created by ion tracks in Gd2Ti2O72015 / Dilpuneet S. Aidhy, Ritesh Sachan, Eva Zarkadoula, Olli Pakarinen, Matthew F. Chisholm, et al.
-
Anomalous CDW ground state in Cu2Se: A wave-like fluctuation of the dc I-V curve near 50 K
Abstract A charge density wave (CDW) ground state is observed in polycrystalline Cu2Se below 125 K, which corresponds to an energy gap of 40.9 meV and an electron-phonon coupling constant of 0.6. Due to the polycrystalline structure, the Peierls...
2017 / Mengliang Yao, Weishu Liu, Xiang Chen, Zhensong Ren, Stephen Wilson, et al. -
Consistency Check of the Functional Solution Model in Special Purpose Machinery
Abstract Individual customer demands and increasing technical complexity are placing an even greater importance on the engineering process for special purpose machine manufacturers. To support the engineering process the Manufacturing System...
2017 / Tobias Helbig, Johannes Hoos, Engelbert Westkämper -
Microstructural characterization of dental zinc phosphate cements using combined small angle neutron scattering and microfocus X-ray computed tomography
Abstract Objective To characterize the microstructure of two zinc phosphate cement formulations in order to investigate the role of liquid/solid ratio and composition of powder component, on the developed porosity and,...
2017 / Alberto Viani, Konstantinos Sotiriadis, Ivana Kumpová, Lucia Mancini, Marie-Sousai Appavou -
Ultrafast laser processing of copper: A comparative study of experimental and simulated transient optical properties
Abstract In this paper, we present ultrafast measurements of the complex refractive index for copper up to a time delay of 20ps with an accuracy <1% at laser fluences in the vicinity of the ablation threshold. The measured refractive index n and...
2017 / Jan Winter, Stephan Rapp, Michael Schmidt, Heinz P. Huber -
Studying the effect of thermal and acid exposure on alkali activated slag Geopolymer2014 / H.M. Khater
-
The H60Si6C54 heterofullerene as high-capacity hydrogen storage medium2016 / Yongliang Yong, Qingxiao Zhou, Xiaohong Li, Shijie Lv
-
Prediction of microstructural evolution during hot forging2014 / Fei Chen, Zhenshan Cui, Jun Chen
-
Modification of Optical Properties of CdS-silicate Nanocomposites by Thermal Annealing
Abstract Temperature influence on optical and structural properties of nanocomposite structures based on cadmium sulfide quantum dots in silicate matrix was investigated. The mechanism of occurrence of reversible laser-induced absorption is...
2017 / A.A. Sergeev, S.S. Voznesenskiy, A.N. Galkina, I.V. Postnova -
<![CDATA[<B>A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures</B>]]>2006 / Edson C. Botelho, Rog�rio A. Silva, Luiz C. Pardini, Mirabel C. Rezende