Materials engineering topic list of research papers
-
Two-Layer Elastographic 3-D Traction Force Microscopy2017 / Begoña Álvarez-González, Shun Zhang, Manuel Gómez-González, Ruedi Meili, Richard A. Firtel, et al.
-
Finite Element Modeling and Synthesis of c-axis Tilted AlN TFBAR for Liquid Sensing Applications
Abstract Thin film bulk acoustic resonator (TFBAR) with c-axis tilted AlN finite element modeling was performed using COMSOL Multiphysics simulation software. Depending on the AlN c-axis tilt angle, dual mode TFBAR can be obtained that operate in...
2017 / C. Caliendo, M. Hamidullah, F. Mattioli -
Discovery of the Fe-analogue of akimotoite in the shocked Suizhou L6 chondrite2017 / Luca Bindi, Ming Chen, Xiande Xie
-
Integration of Photosensors in a Nano-liter Scale Chromatography Column for the Online Monitoring of Adsorption/Desorption Kinetics of a Fluorophore-labeled Monoclonal Antibody
Abstract Chromatography is a robust purification technique, but requires time-consuming optimization on a case-by-case basis, particularly for monoclonal antibodies (mAbs). This work presents a novel microfluidic platform that significantly speeds...
2017 / Inês F. Pinto, D.R. Santos, R.R.G. Soares, M.R. Aires-Barros, V. Chu, et al. -
CuO/ZnO memristors via oxygen or metal migration controlled by electrodes2016 / Yong Huang, Zihan Shen, Ye Wu, Meiqiu Xie, Yanqiang Hu, et al.
-
Carbon nanotubes: Sensor properties. A review
Abstract Recent publications dealing with dealing with the fabrication of gas and electrochemical biosensors based on carbon nanotubes have been reviewed. Experimental and theoretical data on the working principles of nanotubes have been presented....
2017 / Irina V. Zaporotskova, Natalia P. Boroznina, Yuri N. Parkhomenko, Lev V. Kozhitov -
Improved room-temperature-selectivity between Nd and Fe in Nd recovery from Nd-Fe-B magnet2015 / Y. Kataoka, T. Ono, M. Tsubota, J. Kitagawa
-
Cooling achieved by rotating an anisotropic superconductor in a constant magnetic field: A new perspective2016 / Manh-Huong Phan, David Mandrus
-
Comparison of the Thermal Properties of Asbestos and Polyvinylchloride (PVC) Ceiling Sheets2012 / Michael Chukwudi Onyeaju, Evelyn Osarolube, Ephraim Okechukwu Chukwuocha, Chinedu Ekuma Ekuma, Great Arusuedafe Jacob Omasheye
-
Seebeck Coefficient Measurements of Polycrystalline and Highly Ordered Metal-Organic Framework Thin Films2017 / Xin Chen, Zhengbang Wang, Zeinab Mohamed Hassan, Pengtao Lin, Kai Zhang, et al.
-
Mechanical Properties of Magnesium Alloys Produced by the Heated Mold Continuous Casting Process2016 / M. Okayasu, S. Wu, T. Tanimoto, S. Takeuchi
-
Creep behavior of a novel Co-Al-W-base single crystal alloy containing Ta and Ti at 982∘C2014 / Fei Xue, Haijing Zhou, Xuhua Chen, Qianying Shi, Hai Chang, et al.
-
Assessment on the energy flow and carbon emissions of integrated steelmaking plants
Abstract China’s iron and steel industry has developed rapidly over the past two decades. The annual crude steel production is nearly half of the global production, and approximately 90% of the steel is produced via BF–BOF route that is...
2017 / Huachun He, Hongjun Guan, Xiang Zhu, Haiyu Lee -
Tailoring the physical properties of Ni-based single-phase equiatomic alloys by modifying the chemical complexity2016 / K. Jin, B. C. Sales, G. M. Stocks, G. D. Samolyuk, M. Daene, et al.
-
Factors affecting the corrosion fatigue life in nickel based superalloys for disc applications2014 / Hollie Rosier, Karen Perkins, Andrew Girling, Jonathan Leggett, Grant Gibson
-
Ab initio calculations of the optical properties of crystalline and liquid InSb2015 / Haruyuki Sano, Goro Mizutani
-
Mechanism of stress-driven composition evolution during hetero-epitaxy in a ternary AlGaN system2016 / Chenguang He, Zhixin Qin, Fujun Xu, Lisheng Zhang, Jiaming Wang, et al.
-
Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing
Abstract Additively manufactured (AM) metals are often highly textured, containing large columnar grains that initiate epitaxially under steep temperature gradients and rapid solidification conditions. These unique microstructures partially account...
2017 / Tien T. Roehling, Sheldon S.Q. Wu, Saad A. Khairallah, John D. Roehling, S. Stefan Soezeri, et al. -
Vectorial strain gauge method using single flexible orthogonal polydimethylsiloxane gratings2016 / Hao Guo, Jun Tang, Kun Qian, Dimitris Tsoukalas, Miaomiao Zhao, et al.
-
A simplified approach for predicting interaction between flexible structures and acoustic enclosures
Abstract The natural frequencies of acoustic–structure systems can be approximated by a closed-form expression that accounts for the interaction between two uncoupled component modes: a given structural mode and the acoustic mode with which it...
2017 / R.B. Davis