Materials engineering topic list of research papers
-
Distributed parameter model and experimental validation of a compressive-mode energy harvester under harmonic excitations2016 / H.T. Li, Z. Yang, J. Zu, W. Y. Qin
-
Approach to Spacecraft Functional Stability in Changes in Moments of Inertia
Abstract The paper considers comprehensive solution providing functional stability of the spacecraft with changes in its moments of inertia. There was developed the mathematical description of the spacecraft angular position stabilization system...
2017 / Vuong Anh Trung, Nguyen Van Thinh -
Evaluation and comparison of classical interatomic potentials through a user-friendly interactive web-interface2017 / Kamal Choudhary, Faical Yannick P. Congo, Tao Liang, Chandler Becker, Richard G. Hennig, et al.
-
Flow and heat transfer of nanofluids over a rotating disk with uniform stretching rate in the radial direction
Abstract This paper studies flow and heat transfer of nanofluids over a rotating disk with uniform stretching rate. Three types of nanoparticles-Cu, Al2O3 and CuO-with water-based nanofluids are considered. The governing equations are reduced by Von ...
2017 / Chenguang Yin, Liancun Zheng, Chaoli Zhang, Xinxin Zhang -
Fabrication of three-dimensional micro-nanofiber structures by a novel solution blow spinning device2017 / Feng Liang, Feiyu Fang, Jun Zeng, Zhifeng Wang, Weijun Ou, et al.
-
Essential Work of Fracture Testing Method Applied to Medium Density Polyethylene
Abstract Thermoplastic polyethylene has been increasingly used in important structural applications, e.g., in the production of pipelines for water and natural gas distribution systems, leading to the growing interest in the characterization of the...
2014 / Fabiano Moreno Peres, José Ricardo Tarpani, Cláudio Geraldo Schön -
Simulated Analysis of Dielectric Properties of Heterogeneous Materials2016 / Biao Yang, Shili Wang, Jinhui Peng
-
Optimization of the homogenization and hot isostatic pressing heat treatments of a fourth generation single crystal superalloy2014 / Pierre Caron, Catherine Ramusat
-
A new methodology for automating acoustic emission detection of metallic fatigue fractures in highly demanding aerospace environments: An overview
Abstract The acoustic emission (AE) phenomenon has many attributes that make it desirable as a structural health monitoring or non-destructive testing technique, including the capability to continuously and globally monitor large structures using a...
2017 / Karen M. Holford, Mark J. Eaton, James J. Hensman, Rhys Pullin, Sam L. Evans, et al. -
A robust inverse analysis method to estimate the local tensile properties of heterogeneous materials from nano-indentation data
Abstract Most current analysis of nano-indentation test data assumes the sample to behave as an isotropic, homogeneous body. In practice, engineering materials such as structural steels, titanium alloys and high strength aluminium alloys are...
2017 / Damaso M. De Bono, Tyler London, Mark Baker, Mark J. Whiting -
High-Temperature Oxidation of FeCr(Ni) Alloys: The Behaviour After Breakaway2017 / T. Jonsson, H. Larsson, S. Karlsson, H. Hooshyar, M. Sattari, et al.
-
Tailoring the grain structure of IN718 during selective electron beam melting2014 / Carolin Körner, Harald Helmer, Andreas Bauereiß, Robert F. Singer
-
Atomic simulations of twist grain boundary structures and deformation behaviors in aluminum2017 / Qing Yin, Zhiqiang Wang, Rajiv Mishra, Zhenhai Xia
-
Effect of heat-treatment on the hardness and mechanical properties of Boron Alloyed Steel2016 / Mohammad Raffik bin Khiyon, Salwani Mohd Salleh
-
Wind Speed and Direction Detection by Means of Solid-state Anemometers Embedded on Small Quadcopters
Abstract This work describes the application of a compact, MEMS-based, 2D anemometer to the estimation of a quadrotor's airspeed. Correcting for the vehicle's ground speed provided by internal GPS and inertial units allows this low cost, mobile...
2017 / P. Bruschi, M. Piotto, F. Dell’Agnello, J. Ware, N. Roy -
Literature review on imperfection of composite laminated plates
Abstract A composite material can be defined as a combination of two or more materials that gives better properties than those of the individual components used alone. In contrast to metallic alloys, each material retains its separate chemical,...
2017 / Osama Mohammed Elmardi Suleiman Khayal -
A first-principles study of cementite (Fe3C) and its alloyed counterparts: Elastic constants, elastic anisotropies, and isotropic elastic moduli2015 / G. Ghosh
-
Analyzing the effect of large rotations on the seismic response of structures subjected to foundation local uplift2016 / N. El Abbas, A. Khamlichi, M. Bezzazi
-
Space-charge Effect on Electroresistance in Metal-Ferroelectric-Metal capacitors2015 / Bo Bo Tian, Yang Liu, Liu Fang Chen, Jian Lu Wang, Shuo Sun, et al.
-
Nucleation and growth of damage in polycrystalline aluminum under dynamic tensile loading2015 / M. L. Qi, Y. Yao, B. X. Bie, X. X. Ran, W. Ye, et al.