Materials engineering topic list of research papers
-
Asymmetric propagation using enhanced self-demodulation in a chirped phononic crystal2016 / A. Cebrecos, N. Jiménez, V. Romero-García, R. Picó, V. J. Sánchez-Morcillo, et al.
-
Materials design for electrocatalytic carbon capture2016 / Xin Tan, Hassan A. Tahini, Sean C. Smith
-
The influence of interface on spin pumping effect in Ni80Fe20 /Tb bilayer2016 / Jinjin Yue, Sheng Jiang, Dong Zhang, Honglei Yuan, Yukun Wang, et al.
-
Effect of B-doping on the structure and magnetocaloric properties of plate-shaped La0.6Pr0.4Fe11.4Si1.6Hx sintered in high-pressure H2 atmosphere2017 / Naikun Sun, Zengxin Ren, Jie Guo, Pingzhang Si, Mingze Sun
-
Electrochemical investigation on the effects of sulfate ion concentration, temperature and medium pH on the corrosion behavior of Mg–Al–Zn–Mn alloy in aqueous ethylene glycol
Abstract The effects of sulfate ion concentration, temperature and medium pH on the corrosion of Mg–Al–Zn–Mn alloy in 30% aqueous ethylene glycol solution have been investigated by electrochemical techniques such as potentiodynamic polarization and...
2017 / H. Medhashree, A. Nityananda Shetty -
Giant low-field magnetocaloric effect in single-crystalline EuTi0.85Nb0.15O32016 / S. Roy, N. Khan, P. Mandal
-
Mechanical properties at high strain-rate of lead core and brass jacket of a NATO 7.62 mm ball bullet2012 / L. Peroni, M. Scapin, C. Fichera, A. Manes, M. Giglio
-
Simulation and Experimental Validation of Particle Trapping in Microfluidic Magnetic Separation (MMS) System
Abstract Microfluidic magnetic particle trapping system was modelled, designed and manufactured to characterise and enhance the separation efficiency during sample preparation and analysis. Coupled multiphysics model of the evolving magnetic field,...
2017 / E.L. Tóth, A. Füredi, K. Iván, P. Fürjes -
Electronic resonant tunneling on graphene superlattice heterostructures with a tunable graphene layer2016 / Shan Zhang, Liyong Cui, Fen Liu, Guang Lu, Lei Du, et al.
-
Cement-free Binders for Radioactive Waste Produced from Blast-furnace Slag using Vortex Layer Activation Technology2017 / Ilya Mazov, Bekzod Khaydarov, Dmitrii Suvorov, Tamara Yudintseva, Denis Kuznetsov, et al.
-
An atomistic investigation of the effect of strain on frictional properties of suspended graphene2016 / Qingshun Bai, Xin He, Jinxuan Bai, Zhen Tong
-
Phase characterisation and mechanical behaviour of Fe–B modified Cu–Zn–Al shape memory alloys
Abstract The microstructures, phase characteristics and mechanical behaviour of Cu–Zn–Al alloys modified with Fe, B, and Fe–B mixed micro-alloying additions has been investigated. Cu–Zn–Al alloys were produced by casting with and without the...
2017 / Kenneth Kanayo Alaneme, Eloho Anita Okotete, Nthabiseng Maledi -
Wafer-level MOCVD growth of AlGaN/GaN-on-Si HEMT structures with ultra-high room temperature 2DEG mobility2016 / Xiaoqing Xu, Jiebin Zhong, Hongyun So, Aras Norvilas, Christof Sommerhalter, et al.
-
Status and Analysis of Next Generation Post-combustion CO2 Capture Technologies
Abstract Post-combustion CO2 capture technologies tested above ∼20 MWe on flue gas slip streams from coal-fired power plants are thus far exclusively aqueous solutions of amines or ammonia. These near-term technologies, when combined with...
2014 / Abhoyjit S. Bhown -
Effect of humidity on contact electrification due to collision between spherical particles2016 / L. Xie, N. Bao, Y. Jiang, J. Zhou
-
Thermal expansion accompanying the glass-liquid transition and crystallization2015 / M. Q. Jiang, M. Naderi, Y. J. Wang, M. Peterlechner, X. F. Liu, et al.
-
Properties of Alumina/Chromia Scales in N2-Containing Low Oxygen Activity Environment Investigated by Experiment and Theory2017 / Christine Geers, Vedad Babic, Nooshin Mortazavi, Mats Halvarsson, Bo Jönsson, et al.
-
Enhanced photo/electroluminescence properties of Eu-doped GaN through optimization of the growth temperature and Eu related defect environment2016 / W. Zhu, B. Mitchell, D. Timmerman, A. Uedono, A. Koizumi, et al.
-
Process Optimization of EDM Cutting Process on Tool Steel using Zinc Coated Electrode2017 / H. Hanizam, N. Mohamad, U.A.A. Azlan, M. Qamaruddin
-
Fabrication and Characterization of Self-powered Active Hydrogen Sensor based on Triboelectric Nanogenerator
Abstract In this study, triboelectric nanogenerator based self-powered active flexible hydrogen (H2) sensor (TEHS) has been investigated using a micropatterned PDMS and Pd nanoparticles coated vertical ZnO nanorods (Pd-ZnO NRs)....
2017 / A.S.M. Iftekhar, Gwiy-Sang Chung