Materials engineering topic list of research papers
-
Fractal properties of LED avalanche breakdown
Abstract The conventional model of the processes occurring in the course of a p–n-junction's partial avalanche breakdown has been analyzed in this paper. Microplasma noise spectra of industrially produced LEDs were compared with those predicted by...
2016 / Antonina S. Shashkina, Anatoliy V. Krivosheikin, Nicolay N. Skvortsov, Mikhail V. Vorotkov -
Compression after Impact Analysis of Composite Panels and Equivalent Hole Method
Abstract The necessity to exploit the full potential of the composite materials in aviation has stimulated in the last two decades the development of the Progressive Failure Analysis methodology. This kind of analysis foresees discrete damages that...
2016 / Fulvio Romano, Francesco Di Caprio, Umberto Mercurio -
Analysis of Strength on Thick Plate Part using Genetic Algorithm Optimisation Method2016 / S.M. Azlan, Z. Shayfull, S.M. Nasir, Mohd Sazli Saad, M.M. Rashidi, et al.
-
134. Hydrophobic Domains' Modifications in Lipophosphoramidates Results in Lung Transfection's Improvement and Lower In Vivo Toxicity2016 /
-
Experimental Study on the Thermal Performance Improvement of a New Designed Condenser with Liquid Separator
Abstract Thermal and energy saving performance of a new designed shell-and-tube condenser equipped with a liquid separator is experimentally studied. The aim is to timely discharge the condensate, delay the formation of condensed liquid film, and...
2016 / Kai Zhu, Xiaoqing Chen, Baomin Dai, Yabo Wang, Xueqiang Li, et al. -
Cutting Force Prediction in Four-axis Milling of Curved Surfaces with Bull-nose End Mill
Abstract This paper presents a mechanistic model for prediction cutting forces in bull-nose end milling of curved surfaces. Firstly, a mechanistic cutting force model for bull-nose end mill is established. Secondly, the machining process...
2016 / Xu Zhou, Ming Luo, Dinghua Zhang, Wanzhu Liu -
Fuel retention and recovery after disruptive shots in EAST
Abstract Disruption was proposed for controlling long-term fuel retention since the subsequent increase the post-discharge wall outgassing could help in decreasing the fuel retention on the wall after discharges. The amount and temporal behavior of...
2016 / Bin Cao, Jiansheng Hu, Houyin Wang, Yaowei Yu, Jinhua Wu, et al. -
The MTA SZTAKI Smart Factory: Platform for Research and Project-oriented Skill Development in Higher Education
Abstract Nowadays, the potential of learning factories as test beds and research plants is gaining recognition, and several facilities are extended or built up already with these complementing purposes in mind—among them the Smart Factory at the...
2016 / Zsolt Kemény, Richárd József Beregi, Gábor Erdős, János Nacsa -
Quantitative Analysis on Carbide Precipitation in V-Ti Microalloyed TRIP Steel Containing Aluminum2016 / Shiyu Fu, Hui Si, Hu Jiang, Yanlin He, Hua Wang, et al.
-
High Temperature Latent Heat Storage with Direct Electrical Charging – Second Generation Design
Abstract The increasing share of renewables in today's generation mix and the accompanying fluctuation in generation requires large scale as well as decentralized storage capacities to secure grid stability. In the described power-to-heat concept,...
2016 / Ulrich Nepustil, Doerte Laing-Nepustil, Detlev Lodemann, Rameesh Sivabalan, Volker Hausmann -
The Impacts of Energy Construction Adjustment on Energy Intensity and Economic Growth—A Case Study of China
Abstract This paper attempts to explore the impacts of energy construction adjustment on energy intensity and economic growth based on the 3D energy-saving and emission-reduction (ESER) system, which has not yet been discussed in present literature. ...
2016 / Guochang Fang, Lixin Tian, Min Fu, Mei Sun, Ruijin Du -
Soft Processors as a Prospective Platform of the Future
Abstract Modern field-programmable gate arrays (FPGA) play a very important role in designing of new soft CPUs and integrated systems-on-chips. Compared to an application-specific integrated circuit (ASIC), FPGAs provide the highest degree of...
2016 / Dmitry Efanov, Konstantin Grigoryev, Pavel Roschin, Vassili Leonov -
Thermal Analysis of Spent Nuclear Fuels Repository
Abstract In the first part, Pressurized Water Reactor (PWR), Very High-Temperature Reactor (VHTR) and Accelerator-Driven Subcritical Reactor System (ADS) spent fuels (SF) were evaluated to the thermal of the spent fuel pool (SFP) without an external ...
2016 / Fernando Pereira, Jean Salomé, Cristiane Viana, Fabiano Cardoso, Carlos E. Velasquez, et al. -
Determination of band offsets at GaN/single-layer MoS2 heterojunction2016 / Malleswararao Tangi, Pawan Mishra, Tien Khee Ng, Mohamed Nejib Hedhili, Bilal Janjua, et al.
-
Testing of Water Flow Glazing in Shallow Geothermal Systems
Abstract The glazed façade of a building is the part that produces the greatest energy losses and gains. The need to reduce energy consumption and CO2 emissions was one of the reasons that gave rise to dynamic windows. The ideal...
2016 / Fernando del Ama Gonzalo, Juan A. Hernandez Ramos -
Microstructure and defect analysis in the vicinity of blisters in polycrystalline tungsten
Abstract Up to now, analyzing the production of dislocation-type defects in the subsurface region of plasma or ion-exposed tungsten samples has been hampered by the challenging production of suitable cross-section samples for transmission electron...
2016 / A. Manhard, U. von Toussaint, M. Balden, S. Elgeti, T. Schwarz-Selinger, et al. -
Pulsed EM radiation from a traveling-current plasmonic nanowire
Abstract Pulsed electromagnetic (EM) radiation from a traveling-current plasmonic-wire segment is studied analytically using the unilateral Laplace-transform technique. This approach yields closed-form expressions that can be readily evaluated for...
2016 / Martin Štumpf, Guy A.E. Vandenbosch -
Enhancement of Steel A308 Hardness Utilizing Olive Pomace
Abstract Determination of hardness and stiffness for materials is extremely important because of its rule in the design of engineering applications. This work investigated the possibility of increasing A308 steel hardness through the burning of...
2016 / Mohammad E. Matarneh -
An Optimal Planning Method for Combined Cooling Heating and Power System
Abstract In this paper, a combined cooling heating and power micro-grid system framework which considers lots of device types and possible connections is presented. Based on this framework, a mathematical model considering constraints of load demand ...
2016 / Peng Chen, Lin Guan, Zongshun Tang, Xiaocan Chen, Zetao Jiang -
Large piezoelectric properties in KNN-based lead-free single crystals grown by a seed-free solid-state crystal growth method2016 / Jie Yang, Faqiang Zhang, Qunbao Yang, Zhifu Liu, Yongxiang Li, et al.