Materials engineering topic list of research papers
-
Long Time Behavior of LiNi0.80Co0.15Al0.05O2 Based Lithium-ion Cells by Small Depth of Discharge at Specific State of Charge for Primary Control Reserve in a Virtual Energy Storage Plant
Abstract Lithium ion batteries play a prominent role as an energy storage device with increasing importance in various sectors. Based on reasonable power and energy density of Li-ion batteries, they occupy a huge market share on consumer market such ...
2016 / Christopher Betzin, Holger Wolfschmidt, Matthias Luther -
A friction test between steel and a brittle material at high contact pressures and high sliding velocities2012 / B. Durand, P. Bailly, F. Delvare, D. Picart
-
Coupled Hydraulic and Electronic Regulation for Banki Turbines
Abstract The potential benefit of coupling hydraulic and electronic regulation to maximize the energy production of a Bank turbine in hydraulic plants is analyzed and computed with reference to a specific case. Design criteria of the Banki turbine...
2016 / Vincenzo Sammartano, Pasquale Filianoti, Marco Sinagra, Tullio Tucciarelli, Giacomo Scelba, et al. -
Machined Surface Quality in Nano Aluminum Mixed Electrical Discharge Machining
Abstract The development of implants in biomedical engineering application nowadays requires materials with good mechanical and physical properties. Conventional machining of high strength alloy materials is a challenge. Non-conventional machining...
2016 / A.M. Abdul-Rani, A.M. Nanimina, T.L. Ginta, M.A. Razak -
A kinematic vector penalty–projection method for incompressible flow with variable density
Abstract In this Note, we present a new version of the vector penalty–projection splitting method described in [1] for the fast numerical computation of incompressible flows with variable density and viscosity. We show that the velocity correction...
2016 / Philippe Angot, Jean-Paul Caltagirone, Pierre Fabrie -
Enhanced thermoelectric performance of a chalcopyrite compound CuIn3Se5−xTex (x = 0~0.5) through crystal structure engineering2017 / Yufu Lu, Shaoping Chen, Wenchang Wu, Zhengliang Du, Yimin Chao, et al.
-
Numerical/Experimental Study of the Impact and Compression after Impact on GFRP Composite for Wind/Marine Applications
Abstract Damage development due to impact needs to be understood to evaluate the consequences of impact on composite structures. This study concentrates on modelling low velocity impact and consequent compression after impact (CAI) test on thick...
2016 / G. Perillo, J.K. Jørgensen -
Dispersion study of SH-wave propagation in an irregular magneto-elastic anisotropic crustal layer over an irregular heterogeneous half-space
Abstract This study investigates the effect of various parameters on the propagation of seismic SH-waves in a magneto-elastic anisotropic crustal layer with corrugated boundary surfaces, lying over a heterogeneous half-space. The shear elastic...
2016 / Parvez Alam, Santimoy Kundu, Shishir Gupta -
Fighting Energy Poverty by Going Underground
Abstract The inadequate coverage of energy needs in the residential sector, known as energy poverty, is a primary socio-economic problem, worldwide. Especially in Greece, under the pressure of the recent economic crisis, households face serious...
2016 / Lefkothea Papada, Nikolas Katsoulakos, Dimitris Kaliampakos -
Removal of Cs+, Sr2+, and Co2+ Ions from the Mixture of Organics and Suspended Solids Aqueous Solutions by Zeolites
Abstract Serving as an excellent adsorbent and inorganic ion exchanger in the water purification field, zeolite 4A has in this work presented a strong capability for purifying radioactive waste, such as Sr2+, Cs+, and Co2+ in water. During the...
2016 / Xiang-Hong Fang, Fang Fang, Chun-Hai Lu, Lei Zheng -
Automated rf-PERTE System for Room Temperature Deposition of TCO Coatings
Abstract In this work we present a fully automated plasma-enhanced reactive thermal evaporation system (rf-PERTE) that can be used for the deposition of transparent metal oxide films without intentional heating of the substrate. The system and...
2016 / M. Fernandes, Y. Vygranenko, M. Vieira, G. Lavareda, C. Nunes de Carvalho, et al. -
Intelligent Learning Management by Means of Multi-sensory Feedback
Abstract Along with new manufacturing paradigms such as Industry 4.0, based on cyber-physical systems or ubiquitous manufacturing and the rapid development of underlying technologies, the importance of lifelong learning as an integrated part of the...
2016 / Gerrit Posselt, Stefan Böhme, Stephanie Aymans, Christoph Herrmann, Simone Kauffeld -
Enhanced wave and finite element method for wave propagation and forced response prediction in periodic piezoelectric structures
Abstract As a promising numerical tool of structural dynamics in mid- and high frequencies, the wave and finite element method (WFEM) is receiving increasingly attention and applications. In this paper, an enhanced WFEM has been developed with a...
2016 / Yu Fan, Manuel Collet, Mohamed Ichchou, Lin Li, Olivier Bareille, et al. -
Installation of the Pipelines Made of Ductile Iron (DI) With the Usage Of Horizontal-directional Drilling Technique (HDD) For Water Supply Treatment Service and Sewerage Pipelines Construction and Reconstruction
Abstract The cast iron is often considered to be rigid and fragile material that cracks even from a slight tap. It is true only in case when we speak about gray iron. The gray iron contains graphite in the form of flakes that are sharp incisions...
2016 / Stanislav Cherkashin -
Identification of novel candidate drivers connecting different dysfunctional levels for lung adenocarcinoma using protein-protein interactions and a shortest path approach2016 / Lei Chen, Tao Huang, Yu-Hang Zhang, Yang Jiang, Mingyue Zheng, et al.
-
Bridging the Gap between High and Low-volume Production through Enhancement of Integrative Capabilities
Abstract Today—more than earlier—value creation, competitiveness and sustainable growth are dependent on development and utilization of new technology. New technologies enable new ways to develop products and production systems and may improve...
2016 / Elisabeth Lervåg Synnes, Torgeir Welo -
CNT sensors that can detect toxic gases2016 / Laurie Donaldson
-
Transient heat load challenges for plasma-facing materials during long-term operation
Abstract The study summarizes the experimental results on fusion relevant pure heat load exposures of different tungsten products in the electron beam devices JUDITH 1 and 2. Besides steady state heat loading, up to 106 transient ELM-like pulses...
2016 / M. Wirtz, J. Linke, Th. Loewenhoff, G. Pintsuk, I. Uytdenhouwen -
Experimental Verification of the Buckling Strength of Structural Glass Columns
Abstract This paper deals with experimental research of axially loaded members made of structural (laminated) glass. The purpose of the research is the evaluation of buckling strength and actual behaviour of the columns due to the absence of...
2016 / Ondřej Pešek, Martin Horáček, Jindřich Melcher -
Italian Guidelines for Energy Performance of Cultural Heritage and Historical Buildings: The Case Study of the Sassi of Matera
Abstract The Sassi of Matera are a unique example in the world of rock settlements, developed from natural caves carved into the rock and molded into increasingly complex structures inside two large natural amphitheaters. Research focuses on the...
2016 / Elisabetta Negro, Tiziana Cardinale, Nicola Cardinale, Gianluca Rospi