Materials engineering topic list of research papers
-
Prediction of elastic and acoustic behaviors of calcarenite used for construction of historical monuments of Rabat, Morocco
Abstract Natural materials (e.g. rocks and soils) are porous media, whose microstructures present a wide diversity. They generally consist of a heterogeneous solid phase and a porous phase which may be fully or partially saturated with one or more...
2016 / Abdelaali Rahmouni, Abderrahim Boulanouar, Abderrahim Samaouali, Mohamed Boukalouch, Yves Géraud, et al. -
Microstructural and Mechanical-Property Manipulation through Rapid Dendrite Growth and Undercooling in an Fe-based Multinary Alloy2016 / Ying Ruan, Amirhossein Mohajerani, Ming Dao
-
Comparing Hysteretic Energy and inter-story drift in steel frames with V-shaped brace under near and far fault earthquakes
Abstract Different researches have shown that during destructive earthquakes, most structures enter non-reactionary range. Hysteretic Energy, which is wasted after the yield within its hysteresis rings, is very influential on generating structural...
2016 / Gholamreza Abdollahzadeh, Hadi Faghihmaleki, Hedieh Esmaili -
Multifunctional backup electricity supply for NPP auxiliary needs based on combined-cycle power plant with hydrogen overheating
Abstract Approach is suggested of combining nuclear power plant with combined cycle gas turbine unit and hydrogen producing complex which, while operated in normal conditions, give the possibility to increase plant capacity and, in case of complete...
2016 / V.E. Yurin -
Thermophysical Feasibility of Railway Embankment Design on Permafrost when Projecting Side Tracks
Abstract The paper considers modeling of effective structures of existing railroad embankments in several variants when projecting side tracks on the Baikal-Amur Mainline of the “Russian Railway”, PLC. The comparison of different factors affecting...
2016 / Sergey Kudryavtsev, Kazharsky Alexei, Tatyana Valtseva, Zhanna Kotenko, Elena Goncharova -
High-temperature oxidation behaviour of novel Co-Al-W-Ta-B-(Mo, Hf, Nb) alloys with a coherent γ/γ'–dominant microstructure
Abstract In this work, 2at% Mo, 2at% Nb and 2at% Hf were substituted for the same amount of W into a Co-9Al-9W-2Ta-0.02B alloy (hereafter referred as to 2Mo, 2Nb and 2Hf alloys, respectively, while the original alloy is denoted as 0Me alloy). The...
2016 / Fei Zhong, Fei Fan, Shusuo Li, Jiangbo Sha -
Open Noise Barriers Based on Sonic Crystals. Advances in Noise Control in Transport Infrastructures
Abstract Noise control is an environmental problem of first magnitude nowadays. In this work, we present a new concept of acoustic screen designed to control the specific noise generated by transport infrastructures, based on new materials called...
2016 / M.P. Peiró-Torres, J. Redondo, J.M. Bravo, J.V. Sánchez Pérez -
Development of Self-cognition through Imitation Behavior
Abstract We conducted a simulation experiment focused on the development mechanism of self-consciousness using a neural network structured by consciousness modules that we had developed called Module of Nerves for Advanced Dynamics (MoNAD), and...
2016 / Takuma Okawa, Junichi Takeno -
Effect of Water Oil Mist Spray (WOMS) Cooling on Drilling of Ti6Al4V Alloy Using Ester Oil Based Cutting Fluid
Abstract This paper explains environment friendly water oil mist spray (WOMS) cooling method which is used to obtain lower cutting temperature and higher lubrication at tool chip interface during Ti6Al4V twist drilling process. WOMS is Ester oil...
2016 / Sandip Nandgaonkar, T.V.K. Gupta, Suhas Joshi -
Preparation of CuAlO2Thin Films by Sol-Gel Method Using Nitrate Solution Dip-Coating2016 / Takashi Ehara, Takayoshi Nakanishi
-
Wavelet decomposition of software entropy reveals symptoms of malicious code
Abstract Sophisticated malware authors can sneak hidden malicious contents into portable executable files, and this contents can be hard to detect, especially if encrypted or compressed. However, when an executable file switches between contents...
2016 / Michael Wojnowicz, Glenn Chisholm, Matt Wolff, Xuan Zhao -
Estimation of lost circulation amount occurs during under balanced drilling using drilling data and neural network
Abstract Lost circulation can cause an increase in time and cost of operation. Pipe sticking, formation damage and uncontrolled flow of oil and gas may be consequences of lost circulation. Dealing with this problem is a key factor to conduct a...
2016 / Pouria Behnoud far, Pantea Hosseini -
Wave-vector Spectrum of Monochromatic Terahertz Surface Plasmon Polaritons on Real Surfaces
Abstract Experiments at the Novosibirsk free electron laser demonstrating that monochromatic terahertz surface plasmon-polaritons (SPPs) on a real metal surface have a rather wide-band spectrum of their wave-vector are described. The fact was...
2016 / V.V. Gerasimov, B.A. Knyazev, A.К. Nikitin -
Tyrosine Kinase Inhibitors in Pulmonary Vascular Disease
Summary Chronic myeloid leukemia (CML) is a clonal myeloproliferative disorder, characterized by proliferation of granulocytes, caused by a translocation that produces the Philadelphia chromosome resulting in constitutively active BCR-ABL tyrosine...
2016 / John J. Ryan -
Evaluation of Models for Cooling System Design in Hot Stamping Tools
Abstract The hot stamping process is beneficial in the production of parts with high strength and light weight properties. In hot stamping, the sheet metal is firstly heated and rapidly formed and cooled in a closed tool. One of the critical goals...
2016 / R. Muvunzi, D.M. Dimitrov, S. Matope, T.M. Harms -
Comparative Study of Rail Transit's Platform Screen Door System Simulation and Test Based on the Finite Element Method
Abstract In order to test the reliability of the rail transit's platform screen door system structure, this paper focuses on studying the rail transit's platform screen door system. Through modular design of the rail transit's platform screen door...
2016 / Zhifei Wang -
The Effect of Pretreatment Method on the Preparation of Micro-mesoporous ZSM-5/Y-Al2O3Composite Materials2016 / Ruizhi Chu, Tingting Xu, Xianliang Meng, Wenxin Hou
-
Sensitivity Analysis of the Influence of Milling Parameters on the Surface Residual Stress of Titanium Alloy TC11
Abstract In order to improve the surface integrity of titanium alloy, a mathematical model of residual stress in x and y direction is established by three factor and three level orthogonal test method. Based on this model, the influence of milling...
2016 / WeiJun Tian, Yu Li, JunXue Ren, ChangFeng Yao -
Survey of Control Characteristics of Circular Air Dampers in Variable Air Volume Ventilation Systems
Abstract Due to the fact that importance of energy efficiency of building services is consistently growing also demand based VAV ventilation systems are becoming more common. Almost all available terminal VAV dampers on the market are single blade...
2016 / Renars Millers, Uldis Pelite -
Complex Adaptive Behavior: Pragmatic Idealism
Abstract The introduction of new concepts is a driver of organizational evolution and transformation. A newly introduced concept can introduce new meaning that is disparate to existing understanding. A new concept may also be interpreted in multiple ...
2016 / Mustafa Canan, Andres Sousa-Poza