Materials engineering topic list of research papers
-
Colours Found During Restoration of the Seville City Hall Facade
Abstract Iron oxides, Pb3O4 (red lead) with PbO, azurite and calcite were used as pigments in the Seville City hall façade. A gold gild was present in some areas. A black crust caused by environmental contamination was responsible for the black...
2016 / Maria Dolores Robador, Antonio Albardonado, José Luis Perez-Rodríguez -
Application of Neural Network in Shop Floor Quality Control in a Make to Order Business
Abstract A make to order business has to produce the products that are customized to the customer's current need. The customization can be realized by assembling different standard parts with various ‘configurations’. The oil field service industry...
2016 / Rajkamal Kesharwani, Cihan Dagli, Zeyi Sun -
Electro-magnetic Templates with Magnetic Nanoparticles for Cell-based Assays
Abstract We discuss the possibility of a specially designed electro-magnetic template with magnetic nanoparticles for cell-based-assays. There is an urgent need for a special type of hardware allowing for biological cell manipulation. We have...
2016 / Frederick Gertz, Alexander Khitun -
Influence on Transitional Rare Earth Metal Composite on the Ternary Based Sulphate Rich Coatings
Abstract Pure zinc coatings have been widely reported for surface modification on metallic materials for industrial applications. However their major setbacks are their average anticorrosive properties and instability at high-temperature...
2016 / T. Monyai, O.S.I. Fayomi, A.P.I. Popoola -
Evolution of Design and Construction Approaches in the Field of Tunnelling: The Results of Applying ADECO-RS When Constructing Large Underground Works in Urban Areas
Abstract In the last 25 years in Italy, over 1000km of tunnels have been constructed in urban and extra-urban areas. Despite being constructed in very complex and difficult grounds; generally these were completed (from the design stage to the...
2016 / Pietro Lunardi -
Accelerating ferroic ageing dynamics upon cooling2016 / Junyan Zhang, Yunwei Mao, Dong Wang, Ju Li, Yunzhi Wang
-
Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels2016 / N.Z.M. Zaid, M.R.M. Rejab, A.F. Jusoh, D. Bachtiar, J.P. Siregar, et al.
-
Classifying Genomic Sequences by Sequence Feature Analysis
Traditional sequence analysis depends on sequence alignment. In this study, we analyzed various functional regions of the human genome based on sequence features, including word frequency, dinucleotide relative abundance, and base-base correlation. We analyzed the ...
2016 / Zhi-Hua Liu, Dian Jiao, Xiao Sun -
Impact of N-plasma and Ga-irradiation on MoS2 layer in molecular beam epitaxy2017 / Pawan Mishra, Malleswararao Tangi, Tien Khee Ng, Mohamed Nejib Hedhili, Dalaver H. Anjum, et al.
-
An Improved Battery On-line Parameter Identification and State-of-charge Determining Method
Abstract To improve the estimation accuracy of battery's inner state for battery management system, an improved online parameters identification algorithm for equivalent circuit battery model is researched. To reduce the computation cost, the...
2016 / Zhirun Li, Rui Xiong, Hongwen He -
Novel Round Energy Director for Use with Servo-driven Ultrasonic Welder
Abstract Increasingly stringent process repeatability and precision of assembly requirements are common for high-volume manufacturing for electronic, automotive and especially medical device industries, in which components for disposable medication...
2016 / Alex Savitski, Leo Klinstein, Kenneth Holt -
Optimization of Distributed Data Processing System for NICA BM@N Experiment by Using Simulation
Abstract Superconducting accelerator complex NICA is now in a developing stage at the Joint Institute for Nuclear Research 1 1 ...
2016 / Vladimir Korenkov, Andrey Nechaevskiy, Gennadiy Ososkov, Yuri Potrebenikov, Darya Pryahina, et al. -
Hybrid Process Management: A Collaborative Approach Applied to Automotive Industry
Abstract Today, manufacturing is moving towards customer-driven and knowledge-based proactive production. Shorter product life cycles lead to increased complexity in areas such as product and process design, factory deployment and production...
2016 / Filipe Ferreira, Ana Luísa Marques, José Faria, Américo Azevedo -
Research Features of Tunnel Linings with Innovations Fireproof Panels
Abstract The model tests have been done to verified the fire-endurance rating of the fireproof panels. The paper aims at presents the results of studies of innovative materials in the field of experimental, and theoretical research fire resistance...
2016 / Marina Gravit, Sergey Antonov, Oleg Nedryshkin -
Study of the corrosion behaviour of S32101 duplex and 410 martensitic stainless steel for application in oil refinery distillation systems
Abstract The corrosion behaviour of S32101 duplex and 410 martensitic stainless steel was studied through weight loss and potentiodynamic polarization in 1–6M HCl solutions. Results show that S32101 steel has significantly lower corrosion rates than ...
2017 / Roland T. Loto -
Watertight and 2-manifold Surface Meshes Using Dual Contouring with Tetrahedral Decomposition of Grid Cubes
Abstract The Dual Contouring algorithm (DC) is a grid-based process used to generate surface meshes from volumetric data. The advantage of DC is that it can reproduce sharp features by inserting vertices anywhere inside the grid cube, as opposed to...
2016 / Tanweer Rashid, Sharmin Sultana, Michel A. Audette -
Interactive Rheological Modeling in Elasto-visco-plastic Finite Element Analysis
Abstract The elasto-visco-plastic structural analysis with adaptive correction of material model during computation is considered. Several aspects of classification criteria and general principles of the complex rheological models formation are...
2016 / Artem Semenov, Boris Melnikov -
Tungsten fibre-reinforced composites for advanced plasma facing components
Abstract The European Fusion Roadmap foresees water cooled plasma facing components in a first DEMO design in order to provide enough margin for the cooling capacity and to only moderately extrapolate the technology which was developed and tested...
2016 / R. Neu, J. Riesch, A.v. Müller, M. Balden, J.W. Coenen, et al. -
Risk and Reliability Based Calibration of Design Codes for Submerged Floating Tunnels
Abstract Submerged floating tunnels (SFTs), also known as Archimedes’ bridges, allow crossing waterways where common bridges, underground tunnels or immersed tunnels are not feasible. In spite of this, no SFTs have been built yet in the world except ...
2016 / Michele Baravalle, Jochen Köhler -
Low-temperature Interconnection of PVD-Aluminium Metallization
Abstract Aluminium, thermally evaporated with physical vapor deposition (PVD), is considered a cost efficient rear metallization for crystalline silicon heterojunction or tunnel oxide passivated solar cells. Owing to the temperature-sensitivity of...
2016 / Torsten Geipel, Julia Kumm, Monja Moeller, Laurent Kroely, Achim Kraft, et al.