Materials engineering topic list of research papers
-
Graphical Evaluation Method for Void Distribution in Direct Energy Deposition
Abstract Direct energy deposition (DED) process attracts attention from industries because of its applicability to production of complex shape parts. However, technical challenges still remain in DED, such as void evolution inside of the produced...
2016 / Ryo Koike, Ryo Ashida, Keiichi Yamazaki, Yasuhiro Kakinuma, Tojiro Aoyama, et al. -
Drilling load modeling and validation based on the filling rate of auger flute in planetary sampling
Abstract Some type of penetration into a subsurface is required in planetary sampling. Drilling and coring, due to its efficient penetrating and cuttings removal characteristics, has been widely applied in previous sampling missions. Given the...
2016 / Qiquan Quan, Junyue Tang, Fengpei Yuan, Shengyuan Jiang, Zongquan Deng -
Spectroscopy of RFe3(BO3)4 multiferroics: phase transitions, spin-phonon interaction, coupled electron-phonon modes2016 / M.N. Popova
-
Study on the Resilience of the Integrated Energy System
Abstract Integrated energy system (IES) is the composite infrastructure system with subsystems such as electricity, natural gas, heat/cooling, etc. IES can improve efficiency, reduce pollution emission, and lower the dependence of economy on fossil...
2016 / Yanling Lin, Zhaohong Bie -
156. Cationic Lipopolymers for BCR-ABL siRNA Delivery and Growth Arrest in Chronic Myeloid Leukemia Tumors2016 / Juliana Valencia-Serna, K.C.B. Remant, Xiaohong Yang, Hamid M. Aliabadi, Manoj B. Parmar, et al.
-
Enthalpy Relaxation of Polystyrene at Different Molecular Weight Using Fast Calorimetry
Abstract The enthalpy recovery of polystyrene materials with narrow molecular weight distribution is studied by means of fast calorimetry. Two different molecular weights, Mw, have been investigated, namely 2000K and 212k. Intrinsic isotherm...
2016 / Mattia Rosa, Luigi Grassia, Alberto D’Amore, Gabriella D’Escamard -
Efficiency of Use of Galvanic Sludge in Cement Systems
Abstract The use of waste products as accelerators of cement systems’ hardening is economically justified in case of their high efficiency. In this work it was shown that use of galvanic sludge which contains mainly oxides and hydroxides of...
2016 / Sergei Stepanov, Nikolai Morozov, Nina Morozova, Damir Ayupov, Dmitry Makarov, et al. -
An Integrated Risk Sensing System for Geostructural Safety
Abstract Over the last decades, geo-structures are experiencing a rapid development in China. The potential risks inherent in the huge amount of construction and asset operation projects in China were well managed in the major project, i.e. the...
2016 / H.W. Huang, D.M. Zhang, B.M. Ayyub -
Deformation of Working Shells of Mixing Devices in the Production of Concrete for Underground Construction
Abstract The paper presents the calculation of the stress-strain state of the composite shell of the mixing device in the production of concrete used in underground construction. A mathematical model obtained earlier by the authors, which develops...
2016 / Yuriy Yakubovsky, Vladislav Goltsov, Vasiliy Kolosov -
Renewable Energy Development for Buildings
Abstract At the background of urbanization in China, energy consumption of buildings has been ranked as the second largest sector among the industry, building and transportation. Consequently, the renewable energy adopted in buildings has been...
2016 / Hongwei Tan, Yong Lei, Yibo Chen -
Graphene oxide slips through the body2016 / Cordelia Sealy
-
Pull-Out Strength of Resin Anchors in Non-cracked and Cracked Concrete and Masonry Substrates
Abstract The article presents the results of the work of the bonded anchors with selected resins commonly used in the European market for a variety of substrates - concrete walls made of ordinary non-cracked concrete, ordinary concrete cracked with...
2016 / Daniel Dudek, Marta Kadela -
Calculation of the Three-layer Shell Taking into Account Creep
Abstract We obtained resolving equations of finite element method to calculate the three-layer shells taking into account the creep of the middle layer. The outer layers of the shell are considered elastic and isotropic. We investigated the...
2016 / Anton Chepurnenko, Levon Mailyan, Batyr Jazyev -
Effects of thermal and electrical histories on structure and dielectric behaviors of (Li0.5Nd0.5)2+-modified (Bi0.5Na0.5)TiO3-BaTiO3 ceramics
Abstract The effect of thermal and electrical histories on structure and dielectric behaviors is studied using 0.95(Bi0.5Na0.5)0.97(Li0.5Nd0.5)0.03TiO3-0.05BaTiO3 (abbreviated as BNTLN0.03-BT5) ceramic as a selected system. Subtle structure change...
2016 / Jiwen Xu, Qingning Li, Ling Yang, Weidong Zeng, Changrong Zhou, et al. -
Finite Volume Morphodynamic Model Useful in Coastal Environment
Abstract Integrated coastal zone planning requires the support of engineering tools to perform an accurate analysis of the morphodynamics of the coastal environment. In this paper, a numerical 2DH morphodynamic model is presented as a first step in...
2016 / Silvia Bosa, Marco Petti, Francesco Lubrano, Sara Pascolo -
Compaction simulation of nano-crystalline metals with molecular dynamics analysis2016 / A.R. Khoei, A. Rezaei Sameti, H. Mofatteh, M. Babaei
-
Ballistic Impact Response of Woven Hybrid Coir/Kevlar Laminated Composites2016 / A.R Azrin Hani, N.S Azman, R. Ahmad, M. Mariatti, M.N Roslan, et al.
-
Gene expression based cancer classification
Abstract Cancer classification based on molecular level investigation has gained the interest of researches as it provides a systematic, accurate and objective diagnosis for different cancer types. Several recent researches have been studying the...
2016 / Sara Tarek, Reda Abd Elwahab, Mahmoud Shoman -
Dynamic Analysis of Production Network from Perspective of Order Flows
Abstract Order flows arise as abstractions of discrete manufacturing systems, referred to as transfer probability of orders to each manufacturing cell. In this paper, a dynamic model of production network based on state-space is presented from the...
2016 / Haitao Zhang, Dunbing Tang, Tengxiao Huang, Qixiang Cai -
RTS EPD's – Reliable Source of Environmental Information of Building Products in Finland
Abstract There are a lot of different ways of presenting environmental information. The Building Information Foundation RTS sr launched a national EPD-program in 2016. The Information gathered from the Environmental Product Declaration (EPD) is...
2016 / Laura Sariola, Ari Ilomäki