Materials engineering topic list of research papers
-
493. Agitation during siRNA-Cationic Liposome (CL) Complex Formation Is a Key Step To Improve In Vitro RNA Interference by Lipofection2016 /
-
New Monitoring Technologies for Overhead Contact Line at 400km·h−1
Abstract Various technologies have recently been developed for high-speed railways, in order to boost commercial speeds from 300km·h−1 to 400km·h−1. Among these technologies, this paper introduces the 400km·h−1 class current collection performance...
2016 / Chul Jin Cho, Young Park -
Structural behavior for rehabilitation ferrocement plates previously damaged by impact loads
Abstract The main objective of this research is to investigate the possibility of using ferrocement concrete to rehabilitee the damaged plates which failed under impact load. The current work presents the comparison between the results of the first...
2016 / Yousry B.I. Shaheen, Hala M.R. Abusafa -
Design of the Artificial Bone Scaffolds Based on the Multi-field Coupling Model
Abstract The integration design approach for the Artificial Bone Scaffolds based on the Computer Aided Design (CAD), Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD) is developed, and the multi-field coupling Scaffolds Modelling...
2016 / Xue Xing, Yao Chen, Xiu-Tian Yan, Guo-yuan Zhang -
Stabilization of Clay with Using Waste Beverage Can
Abstract This work presents an investigation of the effect of waste aluminum beverage cans strips on strength and swelling properties of lean clay. Waste beverage cans (WBC) were cut into 5mm strips and mixed with soil in 2, 4, 6, 8, and 10% (dry...
2016 / Hanifi Canakci, Fatih Celik, Mohammed O.A. Bizne, Media O.A. Bizne -
Influence of SPH Regularity and Parameters in Dynamic Fracture Phenomena
Abstract The Smoothed Particle Hydrodynamics (SPH) method can be used with advantage in the field of fracture mechanics, which is especially true when quasi-brittle materials are involved. The advantages of the SPH method are more evident when...
2016 / Martin Hušek, Jiří Kala, Filip Hokeš, Petr Král -
Damage and deuterium retention of re-solidified tungsten following vertical displacement event-like heat load
Abstract Surface morphology and hydrogen isotope retention of W specimen melted with vertical displacement event-like heat load and subsequent deuterium (D) plasma exposure were studied. Applied heat loads using electron beam without raster scanning ...
2016 / Y. Hamaji, H.T. Lee, A. Kreter, S. Möller, M. Rasinski, et al. -
Nihility in non-reciprocal bianisotropic media2015 / Younes Ra’di, Viktar S. Asadchy, Sergei A. Tretyakov
-
Investigation of Buckling Capacity of Metal Materials Manufactured by Laser 3D Printing
Abstract The buckling criterion for 3D printed metal materials is studied experimentally in this paper. Several metal columns are manufactured using a laser concept 3D printer using different sample orientations. The maximum length of the specimens...
2016 / Abdollah Malekjafarian, Eugene J. OBrien, L. Alexandru Micu -
τ-MnAl with high coercivity and saturation magnetization2014 / J. Z. Wei, Z. G. Song, Y. B. Yang, S. Q. Liu, H. L. Du, et al.
-
Building Site Organization with 3D Technology in Use
Abstract Nowadays growth of three-dimensional printing technology is observable in different branches of economy. 3D printing is a technology, which uses Information Technology with numerical model to create physical objects. Now that technology is...
2016 / Anna Sobotka, Katarzyna Pacewicz -
Investigating Structure and Dynamics of Proteins in Amorphous Phases Using Neutron Scattering
Abstract In order to increase shelf life and minimize aggregation during storage, many biotherapeutic drugs are formulated and stored as either frozen solutions or lyophilized powders. However, characterizing amorphous solids can be challenging with ...
2016 / Maria Monica Castellanos, Arnold McAuley, Joseph E. Curtis -
Physical Modelling of Pile-group effect on the Local Scour in Submarine Environments
Abstract Pile groups are extensively utilized to provide stability of offshore structures and bridges across rivers. Under the actions of waves and current, severe local scour can be induced around the pile groups in cohesionless soils, compromising ...
2016 / Yi-Xuan Li, Wen-Gang Qi, Fu-Ping Gao -
Extraordinary high ductility/strength of the interface designed bulk W-ZrC alloy plate at relatively low temperature2015 / Z. M. Xie, R. Liu, S. Miao, X. D. Yang, T. Zhang, et al.
-
Automated Fiber Placement Head for Manufacturing of Innovative Aerospace Stiffening Structures
Abstract In the research project “High-performance Production of CFRP Structures” (HP CFK) a new automated fiber placement (AFP) system for laying thermoset CFRP (carbon fiber-reinforced plastic) slit tapes was developed. Its novel, modular designed ...
2016 / Berend Denkena, Carsten Schmidt, Patricc Weber -
Dynamic Parameters to Characterize the Thermal Behaviour of a Layer Subject to Periodic Phase Changes
Abstract The paper addresses the issue of the dynamic characterization of a layer subject to phase change (PCM) with non-sinusoidal periodic boundary conditions, which are typical of the external walls of air-conditioned building. ...
2016 / D. Mazzeo, G. Oliveti, N. Arcuri -
Experimental Investigation of Chatter Trends in Titanium End Milling
Abstract The occurrence of chatter vibrations which mainly originate as result of lack of rigidity in machine parts, cutting tool and instability of the tool-workpiece system during machining is still a recurring concern in the manufacturing...
2016 / Jean Claude Fwamba, Lerato Crescelda Tshabalala, Cebolenkosi Philani Ntuli, Dawood A. Desai -
Review of Sustainability Issues in Non-Traditional Machining Processes
Abstract Non-traditional machining processes (such as EDM and ECM) provide alternatives or sometimes the only alternative in generating highly complex 3-D features in very difficult-to -machine materials. This paper reviews recently published work...
2016 / K.P. Rajurkar, H. Hadidi, J. Pariti, G.C. Reddy -
Underground Railway Safety Analysis and Planning Strategy: A Case of Harbin Metro Line 1, China
Abstract With the development of rapid urbanization, the urban expansion and traffic jams are the serious problem of city development. Underground railway plays an important role in urban public transport, which helps to ease traffic congestion....
2016 / Guo Rong, Wang Sainan, Huang Mengshi -
Performance of PZT8 Versus PZT4 Piezoceramic Materials in Ultrasonic Transducers
Abstract PZT8 and PZT4 are the common “hard” piezoceramic materials used in power ultrasonic transducers (e.g., welding, cutting, sonar, etc.). PZT8 is perceived as the better choice for resonant devices, primarily due to its higher mechanical...
2016 / Dominick A. DeAngelis, Gary W. Schulze