Materials engineering topic list of research papers
-
Design of Composite Stanchions for the Cargo Subfloor Structure of a Civil Aircraft
Abstract The present work was performed in the frame of a national research program focused on the development of analysis method able to improve the structural response of civil aircraft subject to crash event. In particular, the aim of the program ...
2016 / F. Di Caprio, M. Ignarra, F. Marulo, M. Guida, A. Lamboglia, et al. -
Open Design Pattern, Method, and its Self-organization Mechanism
Abstract As the consumer individualization is becoming stronger and the customer demand is changing more frequently, the traditional manufacture-active design pattern cannot meet the demands of the present age. It is widely acknowledged by experts...
2016 / Libin Tan, Dunbing Tang, Qi Wang, Jun Yang -
Proportional and Integral Constants Optimization Using Bacterial Foraging Algorithm for Boost Inverter
Abstract A boost dc-ac inverter is one which is capable of generating in a single stage ac voltage whose peak value can be higher or lower than the given input dc voltage. The major problem with this system is that the closed loop gain parameters kp ...
2016 / G. Arunkumar, I. Gnanambal, P.C. Karthik, S. Naresh -
Development of Passively Safe Post Using Momentum Principle and Crushing of Energy Absorbing Module
Abstract Roadside columns exposed to traffic without being properly shielded are severe hazards to the occupant safety of the vehicle impacting to the posts. In the case, passively safe columns should be used. Energy absorbing columns and breakaway...
2016 / Mangi Ko, Minhyung Nho, Keedong Kim, Dukgeun Yun, Jaehong Park -
400. Vaccines Based on Disrupted Ad5 Against Small Molecule Drugs Are Efficacious in the Presence of Preexisting Ad5 Immunity2016 /
-
Constructive and Graphic Study of the Influence of New Engineering Techniques in the Method, Theory and Design of Architecture between 1840 and 1872
Abstract In 1840 the first rail link between Basel and Strasbourg was inaugurated and the first stage of the industrial revolution ended. From this date the rapid and great engineering technical advances that had been taking place over the previous...
2016 / Adela Rueda Márquez de la Plata, Pablo Alejandro Cruz Franco -
Lithofacies paleogeography and favorable gas exploration zones of Qixia and Maokou Fms in the Sichuan Basin
Abstract In the Sichuan Basin, the Middle Permian marine carbonate rocks are important natural gas pay zones with immense exploration potential, but the facies belts and distribution situations of layered dolomite reservoirs are not clear, which...
2016 / Jingao Zhou, Genshun Yao, Guang Yang, Mingfeng Gu, Qianying Yao, et al. -
Bolt Assembly Optimization and Life Prediction Based on Creep Curve
Abstract This paper research the phenomenon that the engine bolts would creep under the preload and the high temperature in the operation process, and creep could cause the degradation of preload leading to engine failure. Through the...
2016 / Zhiyuan Lu, Wei Dai -
Effect of Quench Delay on Subsurface Integrity During Machining of Titanium Alloy Ti6Al4V
Abstract Machining of titanium alloys generates enormous amount of heat at the chip-tool interface which leads to poor machinability. The current research investigates the effect of change in alpha and transformed beta phase resulting from different ...
2016 / Swapnil Kekade, Sandip Patil, Kamlesh Phapale, Shital Jadhav, Amit Powar, et al. -
On the probability of detecting wall thinning defects with dispersive circumferential guided waves
Abstract Two ultrasonic techniques are well established for pipe inspection and monitoring: highly sensitive ultrasonic spot thickness measurements, which can be presented in C-scan form, or low frequency guided waves that rapidly screen large areas ...
2016 / Richard Howard, Frederic Cegla -
Internal Power Recovery Systems for Cryogenic Cooling Plants: Secondary Compressor Development
Abstract Refrigeration systems consume a relevant amount of electrical power worldwide. For this reason, in the last decades, several energy saving techniques have been proposed to reduce the power demand of such plants. The...
2016 / A. Giovannelli, E.M. Archilei, E. Palazzo -
A User Interface Damage Detection Technique Based on a Multi-parameter Methodology
Abstract Structural Health Monitoring (SHM) based on ultrasonic guided waves is able to assess the health of complex structures, improving maintenance strategies and overall performances of an aircraft. However, wave propagation analysis in...
2016 / V. Memmolo, M. Cindolo, F. Ricci, N.D. Boffa, L. Maio, et al. -
Small punch tensile testing of curved specimens: Finite element analysis and experiment
Abstract The Small Punch (SP) technique is a miniature test used for characterizing irradiated materials or when a testing material is available only in small quantities. In this work Finite Element (FE) models are developed to support the...
2016 / Igor Simonovski, Stefan Holmström, Matthias Bruchhausen -
Inspection Method with Infrared Thermometry for Detect Void in Subway Tunnel Lining
Abstract Spalling is the most serious problem in the maintenance of subway tunnels. Voids forming on or near the concrete surface are often considered as signs of degradation leading to spalling. However, it is difficult to detect these voids by...
2016 / Shinji Konishi, Koichi Kawakami, Masumi Taguchi -
Heat Pump System Simulation towards Energy Performance Estimation in Office Buildings
Abstract This investigation presents an estimation of the energy performance of an office building which is equipped with a heat pump system. The paper presents the simulation methodology of a multi-zone office building for temperate climate...
2016 / Norbert Harmathy, Vera Murgul -
Effects of Thickness and Curvature on Impact Behaviour of Composite Panels
Abstract In this study, thickness and curvature effects on high velocity impact behavior of flat and cylindrical panels are investigated numerically. Four different samples are analyzed by using LS-DYNA software and the results are compared with...
2016 / Fatih Usta, Fehmi Mullaoglu, Halit S. Türkmen, Demet Balkan, Zahit Mecitoglu, et al. -
X-FEL Quadrupole with Gradient of 100 T/m
Abstract The paper describes an XFEL quadrupole with a gradient of 100 T/m. The magnets of this quadrupole are designed for installation in the free space between the XFEL undulators to maintain the high quality of the electron beam at an energy of...
2016 / Ivan Okunev, Ivan Morozov, Nikolay Nefedov -
Exploring the Logic and Landscape of the Knowledge System: Multilevel Structures, Each Multiscaled with Complexity at the Mesoscale2016 / Jinghai Li
-
158. Tumor-Directed Small Interfering RNA Delivery by Anti-EGFR Immunonanoplexes2016 /
-
Analysis of the Performance of Aerial Work Platform Working Device Based on Virtual Prototype and Finite Element Method
Abstract In this paper, a model of aerial work platform working device based on virtual prototype and finite element method was established. Through the software ADAMS kinematic simulation, we got the moving velocity and acceleration. The moving...
2016 / Jinquan Guo, Hongwen He, Chao Sun