Materials engineering topic list of research papers
-
A Study on the Effect of Different Activating Flux on A-TIG Welding Process of Incoloy 800H2016 / S.P. Sridhar, S. Arun Kumar, P. Sathiya
-
Sensor Signal Segmentation for Tool Condition Monitoring
Abstract Robust tool condition monitoring system requires reliable, repeatable selection of representative segments of the sensor signals. In commercial TCM systems and most of laboratory ones useful signal segments are selected by the system user,...
2016 / Sebastian Bombiński, Krzysztof Błażejak, Mirosław Nejman, Krzysztof Jemielniak -
Situated Design Optimization of Haptic Devices
Abstract It is a complex task to develop and optimize a high-performing haptic device. Design optimization scenarios with predefined and fixed sets of performance requirements are presented in literature. However, the early design optimization...
2016 / Xuan Sun, Ulf Sellgren, Kjell Andersson -
Radial Bearings with Porous Elements
Abstract This paper presents the analytical model of the radial bearing of the finite length with the two-layer porous insert obtained on the basis of the dimensionless equations of movement of a viscous incompressible lubricant in an operating...
2016 / M.A. Mukutadze -
Technological and Simulative Analysis of Power Skiving
Abstract Power skiving is a modern and productive machining process in the manufacturing of cylindrical internal gears and external gears surrounded by interfering contours. The influence of geometric process settings on characteristic values such...
2016 / Fritz Klocke, Christian Brecher, Christoph Löpenhaus, Philipp Ganser, Julian Staudt, et al. -
Optimization Design of Guiding Device on Hydraulic Press Column Based on Axiomatic Design Theory
Abstract During the lower speed precision stamping process, the slide block may jitter or crawl because of the unbalance friction on the guide device, which will influence the quality and precision of the workpiece. Therefore, it is necessary to...
2016 / Hui-lin Qu, Yi-xiong Feng, Yi-cong Gao, Jian-rong Tan -
Тhe transformation of the oxide coatings of aluminum by imitation factors of nuclear power plants
Abstract The authors present the results of a study on kinetics of hydrogen generation by heterogeneous compositions with aluminum exposed to γ-irradiation in air, in different aqueous solutions at room temperature and high temperature annealing. It ...
2016 / V.K. Milinchuk, E.R. Klinshpont, V.I. Belozerov, I.S. Khavroshina, E.I. Sadikov -
A Method of Evaluation of Polioptimal Thermo-modernization Schemes of Buildings
Abstract The authors proposed a polioptimal method for determining thermo-modernization schemes of buildings based on the theory of fuzzy sets. As optimization criteria the minimization of the total cost of thermo-modernization and maximization of...
2016 / Arkadiusz Węglarz, Paweł Grzegorz Gilewski -
Numerical Investigation of Sediment Transport and Bedmorphology on a Stretch of Nakdong River
Abstract In this study, we modified and applied an open source CFD software package, the TELEMAC, to simulate sediment transport and bed morphology on a meandering stretch of Nakdong River, between Gangjeong and Dalsung Weirs, whose length is about...
2016 / Van Thinh Nguyen, Noah Yun -
Effects of Precipitation Hardedning in Co-Ni-Cr Alloy on Dissipative Motion of Dislocations by Amplitude-Dependent Internal Friction Measurements / Wpływ Utwardzenia Wydzieleniowego Stopu Co-Ni-Cr Na Rozpraszający Ruch Dyslokacji Badany Przez Zależne Od Amplitudy Pomiary Tarcia Wewnętrznego2016 / R. Cosimati, Daniele Mari
-
Thermographic Image Analysis of Fatigue Crack Propagation in a High-Alloyed Steel under usage of discrete fourier transformation and rigid body motion compensation
Abstract To optimize the evaluation of thermographic measurements a lock-in algorithm with motion compensation was developed. Analysis showed that motion of the specimen could be compensated and therefore deformation of stress and temperature fields ...
2016 / Ralf Urbanek, Jürgen Bär -
Biodegradation of Polyethylene Using Bacillus Subtilis
Abstract Polyethylene is among the major plastics being dumped in the environment. The study explores methods to enhance the rate of biodegradation of polyethylene using physical and biological means. Bacterial species –Bacillus subtilis – was...
2016 / P.P. Vimala, Lea Mathew -
Monitoring Results and Energy Performances Evaluation of Freescoo Solar DEC Systems
Abstract This work addresses the energy saving performances of some solar Desiccant and Evaporative Cooling (DEC) systems working with the freescoo technology. The innovative freescoo concept is based on the use two fixed and cooled adsorption beds...
2016 / Pietro Finocchiaro, Marco Beccali, Valerio Lo Brano, Vincenzo Gentile -
Dimensionality Reduction Using Band Selection Technique for Kernel Based Hyperspectral Image Classification
Abstract Hyperspectral images have abundant of information stored in the various spectral bands ranging from visible to infrared region in the electromagnetic spectrum. High data volume of these images have to be reduced, preserving the original...
2016 / R. Reshma, V. Sowmya, K.P. Soman -
The Influence of Ceramic Binder Grinding Wheel Structural and Mechanical Characteristics on its Durability
Abstract An investigation of structural and mechanical properties of abrasive tools on a ceramic binder for its durability is performed. It shows the relationship of operational parameters of the grinding wheel: cutting capacity, durability with a...
2016 / V.M. Shumyacher, A.V. Slavin, S.A. Kryukov -
A twin disc test rig for contact fatigue characterization of gear materials
Abstract Pitting on gear tooth flanks is one of the major causes of failure in power transmissions. Cracks originate at the surface and propagate at a small depth causing the detachment of material debris, which results in craters. Pitting is...
2016 / G. Meneghetti, A. Terrin, S. Giacometti -
Comparison of ARX and ARMAX Decorrelation Models for Detecting Model-Plant Mismatch
Abstract Process model is the kernel element of Model Predictive Control (MPC) system. It is always desirable to get a model as accurate as the actual facility or plant to reduce the built-in mismatch. With the passage of time, the mismatch between...
2016 / Fahim Uddin, Lemma Dendena Tufa, Suhaib Mohd Taha Yousif, Abdulhalim Shah Maulud -
Lubricant Enhancement via Hydrodynamic and Acoustic Cavitation
Abstract Lubricant plays a vital role in reducing wear, friction and energy consumption in any machinery. It is mainly used in automotive, industrial, processing, and marine. Various types of lubricant were developed from time to time to meet with...
2016 / Stephen Sie Kiong Kiu, Suzana Yusup, Chok Vui Soon, Taufiq Arpin, Syahrullail Samion -
Synthesis and Structural Analysis of Double Layered Ni-Mg-Al Hydrotalcite Like Catalyst
Abstract Hydrotalcites are double layered lamellar clays. It has high surface area and different types of active sites can be fused on its surface this make hydrotalcites an ideal structure for hetero generous catalytic reactions. In this article...
2016 / Umair Sikander, Suriati Sufian, Md. Abdus Salam -
Message from Vice Chairman's Desk2016 /