Materials engineering topic list of research papers
-
Multifunctional Dielectric Layers for the Fabrication of Ultra-Simplified n-PERT c-Si Solar Cells
Abstract Bifacial solar cell n-PERT concept involves boron and phosphorus doped regions requiring both proper surface passivation. In order to reduce n-PERT technology related €/W, one way considered is to simplify cell process-flow. In order to do...
2016 / Raphaël Cabal, Thomas Blévin, Rémi Monna, Yannick Veschetti, Sébastien Dubois -
Identification of Relevant Work Parameters of Ladle Furnace While Melting the High Ductility Steel and High-Carbon Steel2016 / M. Warzecha, S. Garncarek, T. Merder, Z. Skuza
-
Decrease of the Vibration Load Level on the Tractor Operator Working Place by Means of Using of Vibrations Dynamic Dampers in the Cabin Suspension
Abstract This paper is devoted to description of the method for decreasing of the vibration load level on the tractor operator working place using vibrations dynamic dampers in the cabin suspension. Standard cabin vibration isolators of tractors of...
2016 / A.V. Pobedin, A.A. Dolotov, V.V. Shekhovtsov -
Simulation Study of Light-induced, Current-induced Degradation and Recovery on PERC Solar Cells
Abstract The way to permanently recover the well-known Light-Induced Degradation (LID) which affects the p-type Cz-Si PERC solar cells represents one of the main challenges of photovoltaic research. In this work we have set up a numerical...
2016 / Massimo Nicolai, Mauro Zanuccoli, Marco Galiazzo, Matteo Bertazzo, Enrico Sangiorgi, et al. -
Characterization of Maple and Ash Material Properties as a Function of Wood Density for Bat/Ball Impact Modeling in LS-DYNA
Abstract Finite element models of wood baseball bats are a valuable tool to explore the relationship between bat profile and bat durability. However, for such finite element models to be credible, the material models must capture the mechanical...
2016 / Joshua Fortin-Smith, James Sherwood, Patrick Drane, David Kretschmann -
Characterization of Casting Pores in Fe-rich Al-Si-Cu Alloys by Microtomography and Finite Element Analysis
Abstract An accurate methodology has been developed to identify local stress concentration on the contour of casting pores in high Fe-content Al-Si-Cu alloys. It relies on the 3D reconstruction of the pore morphology by micro-computed tomography...
2016 / M. Wicke, M. Luetje, I. Bacaicoa, A. Brueckner-Foit -
Effect of Weld Defects on the Fatigue Strength of Ultra High-strength Steels
Abstract Enhancing the lightweight potential of mobile steel structures by applying high-strength steels and reducing sheet thicknesses leads to a significant increase of energy effectiveness and a reduction of noxious emissions during operation....
2016 / M.J. Ottersböck, M. Leitner, M. Stoschka, W. Maurer -
Mutual Entity Authentication Protocol Based on ECDSA for WSN
Abstract Digital Signatures are primarily employed to achieve data integrity, data origin authentication and non-repudiation. In comparison to RSA-based digital signatures, the ECC (Elliptical Curve Cryptography) based Signature schemes like ECDSA...
2016 / Ayaz Hassan Moon, Ummer Iqbal, G. Mohiuddin Bhat -
Study of Fatigue Cracks with Numerical and Experimental Methods
Abstract Recent technological improvements in digital photography have made Digital Image Correlation (DIC) a robust and reliable technique for measuring displacement and strain fields at the surface of a cracked specimen. Bulk information can be...
2016 / D. Camas, P. Lopez-Crespo, A. Gonzalez-Herrera, A.S. Cruces, B. Moreno -
Feasibility of manufacturing combustion chambers for aeronautical use in Mexico
Abstract The aeronautical sector is strategically important for the economic development of Mexico and has grown steadily over the last 10 years. Furthermore, it generates high added value for its products. In Mexico, the aircraft manufacturing...
2016 / Alonso Romero-Jabalquinto, Abraham Velasco-Téllez, Patricia Zambrano-Robledo, Bárbara Bermúdez-Reyes -
Tissue Spheroids Encaged Into Microscaffolds with Internal Structure to Increase Cell Viability
Abstract Aggregates of pre-sorted cells form structures called tissue spheroids that have been widely used in the field of tissue engineering. The greater contact of the cells with the culture medium is directly related to cell viability and to the...
2016 / J.A. Dernowsek, R.A. Rezende, V.E. Passamai, P.Y. Noritomi, D.T. Kemmoku, et al. -
Finite Element Analysis of Discharge Antivibrational Pipe Stress State of the Piping System Flexible Joint
Abstract The paper studied the stress-strain state of the discharge antivibration pipe of the flexible joint of piping systems from the effects of overpressure. The estimation of the distribution of contact forces and stresses in the fastening...
2016 / V.G. Tsyss, M.Yu. Sergaeva -
22.2% Efficiency n-type PERT Solar Cell
Abstract N-type PERT (passivated emitter rear totally diffused) silicon solar cells promise high and stabilized conversion efficiencies. As relative big contact recombination and shading losses were introduced by traditional front screen-printed...
2016 / Wenhao Cai, Shengzhao Yuan, Yun Sheng, Weiyuan Duan, Zigang Wang, et al. -
COGOM: Cognitive Theory Based Ontology Matching System
Abstract Ontology matching systems take a prominent position in solving semantic heterogeneity problems to facilitate sharing and reuse of ontologies. The process of generating ontology alignments through ontology matching techniques purely lies on...
2016 / K. Saruladha, S. Ranjini -
A Retrospective View of EMM-ARM: Application to Quality Control in Soil-improvement and Complementary Developments
Abstract The EMM-ARM (Elasticity Modulus Measurement through Ambient Response Method) is a technique that allows the continuous measurement of the E-modulus of a given material under test, since the instant in which it is cast into the testing...
2016 / Miguel Azenha, Jacinto Silva, José Granja, António Gomes-Correia -
Design and investigation of sectoral circular disc monopole fractal antenna and its backscattering
Abstract This article presents the design of sectoral circular disc fractal antenna. The proposed antenna has been excited using CPW – feed. The measured result of this antenna offers the ultra wideband characteristics from 3.265GHz to 15.0GHz. The...
2016 / Raj Kumar, Nagendra Kushwaha -
Firing through Aluminum Grid Paste for Bifacial Solar Cells
Abstract A rear side PECVD passivation stack and an aluminum firing-through paste for the rear side metallization of p-type bifacial multicrystalline solar cells were developed. Both passivation stack and Al paste were adapted to each other to reach ...
2016 / Dominik Rudolph, Thomas Buck, Andreas Teppe, Faramarz Binaie Masouleh, Rudolf Harney -
Preface2016 / S.K. Dwivedy, R. Tiwari
-
Adsorption Properties of Modified Zeolites for Operating Range Enhancement of Adsorption Heat Pumps through the Use of Organic Adsorptive Agents
Abstract Faujasite zeolites with the highest possible Al-content and different cations as well as a dealuminated zeolite Y have been chosen to study the impact on the adsorption behavior in view of differed adsorptive agents for heat pumps or...
2016 / Thomas H. Herzog, Jochen Jänchen -
Proposal and Application of a New Theoretical Framework of Uncertainty Estimation in Rainfall Runoff Process Based on the Theory of Stochastic Process
Abstract The aim of this study is to clarify the effect of the uncertainty of inputs in respect of output by rainfall-runoff process. In Japan, we have performed runoff analysis using deterministic model such as storage function model in the past....
2016 / Yoshimasa Morooka, Daiwei Cheng, Kazuhiro Yoshimi, Chao-Wen Wang, Tadashi Yamada