Materials engineering topic list of research papers
-
A Review of Surface Deformation and Strain Measurement Using Two-Dimensional Digital Image Correlation2016 / Sze-Wei Khoo, Saravanan Karuppanan, Ching-Seong Tan
-
Analytical Approach to Determine Speed-torque Curve of Induction Motor from Manufacturer Data
Abstract Induction motors are widely used every production process today. Their torque-speed characteristics are the most important properties. This paper describes a simple and efficient analytical technique to determine speed-torque performance...
2016 / Pichai Aree -
Hydrodynamic Seal on the Basis of a Cylindrical Layer of the Compressible Fluid with a Running Wave
Abstract The hydrodynamic seal is based on a cylindrical layer of the compressible fluid with a running wave, which, unlike the conventional hydrodynamic seal, has the characteristics that do not depend on the rotation speed of the sealed shaft. The ...
2016 / S.G. Nekrasov -
Deformation Monitoring Using Persistent Scatterer Interferometry and Sentinel-1 SAR Data
Abstract During the last decades, Persistent Scatterer Interferometry (PSI) has demonstrated to be a powerful tool able to measure and monitor deformations. This technique makes use of large stacks of interferometric SAR images to derive the...
2016 / Núria Devanthéry, Michele Crosetto, María Cuevas-González, Oriol Monserrat, Anna Barra, et al. -
Open-transistor Fault Detection and Diagnosis Based on Current Trajectory in a Two-level Voltage Source Inverter
Abstract Even though technological developments in the area of control of voltage source inverter (VSI) have reached a relatively matured state, advances in improving the reliability of VSI is still a developing area. In order to improve safety as...
2016 / Nithin Raj, Jose Mathew, G. Jagadanand, Saly George -
Vessels for the Future
Abstract The European research association Vessels for the Future was launched in November 2014. It has members has 59 members (as of May 2015) in 14 EU Member States. Members represent ship owners, ship yards, ship system suppliers, classification...
2016 / Thomas Witolla, Pierre Sames, Alistair Greig -
High Power Laser Beam Welding of Thick-walled Ferromagnetic Steels with Electromagnetic Weld Pool Support
Abstract The development of modern high power laser systems allows single pass welding of thick-walled components with minimal distortion. Besides the high demands on the joint preparation, the hydrostatic pressure in the melt pool increases with...
2016 / André Fritzsche, Vjaceslav Avilov, Andrey Gumenyuk, Kai Hilgenberg, Michael Rethmeier -
Reliability of Thermal Networks for City Development
Abstract The work studies the problems arising at calculation of reliability indicators in relation to thermal networks of the large cities. Techniques of determination of reliability of heat supply deadlock and ring systems are analysed....
2016 / Sh.G. Ziganshin, Yu.V. Vankov, T.G. Gorbunova -
Soil-cement of Normal Hardening on the Basis of the Argillaceous Raw Material and Copper Ore Processing of Waste in Eco-geology and Construction
Abstract The paper examines properties, main characteristics and areas of application of soil-cement. The applicability of clay as a matrix basis of construction for a composite material is considered. The basis of soil-cement as a ...
2016 / D.V. Ulrikh, M.D. Butakova -
Effect of solidification rate on microstructure evolution in dual phase microalloyed steel2016 / A. G. Kostryzhev, C. D. Slater, O. O. Marenych, C. L. Davis
-
Inverting the Classroom in an Introductory Material Science Course
Abstract Inverting the classroom in material science is a method to let students study the science of engineering materials on their own and then take time to discuss their questions and do extended hands-on lectures or exercises in class. A...
2016 / Anja Pfennig -
First principles investigation of structural, elastic, electronic and optical properties of HgGeB2 (BP, As) chalcopyrite semiconductors
Abstract The structural, elastic, electronic, and optical properties of HgGeB2 (BP, As) are investigated using the plane-wave ultrasoft pseudo-potential technique, which is based on the first-principle density functional theory (DFT) with...
2016 / Md. Atikur Rahman, Md. Zahidur Rahaman, Md. Abdur Razzaque Sarker -
The grain refinement potency of bismuth in magnesium
Abstract A quantitative model was applied to analyse the grain refinement potency of bismuth in magnesium. The efficiency of the grain refiner was identified through the analysis of grain size vs inverse of the growth restriction factor (Q) plots,...
2016 / Utsavi Joshi, N. Hari Babu -
A Decision Support System for the Design of Cellular Manufacturing Systems: Database Conceptualization
Abstract In Cellular Manufacturing Systems (CMS) resources are grouped to create independent cells capable of completely processing a set of similar parts. The design of such a system is complex and entails several interconnected problems. The...
2016 / Ana Raquel Xambre, Leonor Teixeira, Pedro Vilarinho -
A Novel Approach to Brain Biometric User Recognition
Abstract Advances in the field of information technology makes information security is a major part of it. To deal with security, Recognition plays an important role. Now a day the numbers of organizations are using automated person recognition...
2016 / K.C. Reshmi, P. Ihsana Muhammed, V.V. Priya, V.A. Akhila -
Multi-shape active composites by 3D printing of digital shape memory polymers2016 / Jiangtao Wu, Chao Yuan, Zhen Ding, Michael Isakov, Yiqi Mao, et al.
-
Design and Verification of Geometric Roughness Standards by Reverse Engineering
Abstract In order to ensure a reliable calibration of surface topography measuring instruments the use of practical calibration strategies is required. This requirement can be fulfilled when measurement standards with a defined surface structure in...
2016 / Jörg Seewig, Matthias Eifler, Frank Schneider, Jan C. Aurich -
Surface Microstructure of Mo(C)N Coatings Investigated by AFM2016 / T. Kuznetsova, T. Zubar, S. Chizhik, A. Gilewicz, O. Lupicka, et al.
-
A Project Oriented Approach to Determine Membrane Properties
Abstract This lecture describes the approach to determine the material properties based on the regularly done compensation tests, so that for almost every project the material properties can be determined. The implementation in a software tool...
2016 / Bernd Stimpfle, David Günther -
Optimized Tab Width in Half-cell Modules
Abstract Modules with half-cell layout show an increased efficiency due to reduced electrical losses and increased optical gains. In this work, we demonstrate that by reducing the tab width, additional benefits can be obtained and the demands for...
2016 / Hamed Hanifi, David Dassler, Jens Schneider, Marko Turek, Sebastian Schindler, et al.