Materials engineering topic list of research papers
-
Predicting Chemical Wear in Machining Titanium Alloys Via a Novel Low Cost Diffusion Couple Method
Abstract Chemical wear during high speed machining of titanium alloys is a serious problem which affects the surface integrity of both the tool and workpiece. A low cost, novel diffusion couple method is presented which allows for thorough analysis...
2016 / Oliver Hatt, Henrik Larsson, Finn Giuliani, Pete Crawforth, Bradley Wynne, et al. -
A Simplified Method for Pore Pressure Buildup Prediction: From Laboratory Cyclic Tests to the 1D Soil Response Analysis in Effective Stress Conditions
Abstract The importance of predictions of earthquake-induced pore water pressure has been widely recognized for reliable evaluations of strong-motion response of saturated soil. The build-up of excess pore water pressure, in fact, causes reduction...
2016 / Anna Chiaradonna, Giuseppe Tropeano, Anna d’Onofrio, Francesco Silvestri -
Cybernetic model of the shock induced wave evolution in solids
Abstract New concept of high-strain-rate processes in solids is developed using the nonlocal theory of nonequilibrium transport. The interdisciplinary theoretical approach is constructed on the base of nonequilibrium statistical mechanics and...
2016 / A.L. Fradkov, T.A. Khantuleva -
Brief data overview of differently heat treated binder jet printed samples made from argon atomized alloy 625 powder
Abstract Powder bed binder jet printing (BJP) is an additive manufacturing method in which powder is deposited layer-by-layer and selectively joined in each layer with binder. The data presented here relates to the characterization of the...
2016 / Amir Mostafaei, Yashar Behnamian, Yuval L. Krimer, Erica L. Stevens, Jing Li Luo, et al. -
Modal Identification of Aircraft Wing Coupled Heave-Pitch Modes Using Wavelet Packet Decomposition and Logarithmic Decrement
Abstract Low frequency bending mode (heave) and high frequency twisting mode (pitch) are the two typical modes of motion that exist in an aircraft wing. Coupling of these modes produce flutter effect, which can severely distort the wing without...
2016 / Feroz Ahmed, S.B. Kandagal -
Thermomechanical Spalling of Epitaxially Grown Silicon from Porosified Substrates
Abstract We combine two kerfless approaches to unite advantages of both processes: the epitaxial layer transfer based on porous silicon (PSI process) and the lift-off of a thin silicon layer from a substrate via controlled spalling by a...
2016 / Verena Steckenreiter, Jan Hensen, Alwina Knorr, Raphael Niepelt, Rolf Brendel, et al. -
BEAM: A Computational Workflow System for Managing and Modeling Material Characterization Data in HPC Environments
Abstract Improvements in scientific instrumentation allow imaging at mesoscopic to atomic length scales, many spectroscopic modes, and now—with the rise of multimodal acquisition systems and the associated processing capability—the era of...
2016 / E.J. Lingerfelt, A. Belianinov, E. Endeve, O. Ovchinnikov, S. Somnath, et al. -
A simplified technique to determine intraparticle diffusivity of macro-reticular resins
Abstract Both resins and activated carbons are commonly used as adsorbents in water and wastewater treatment. In general, intraparticle diffusion mechanisms within macro reticular resin particles (such as XAD-2000) are different from those in...
2016 / Takashi Kawakita, Huan-Jung Fan, Yoshimi Seida, Junpei Fujiki, Eiji Furuya -
Optimization of the Design of a Discus for People with Disabilities
Abstract In a method for simultaneously optimizing both the throwing technique and the equipment was applied to the design of a discus for people (athletes) with disabilities (Paralympians). As the movement of athletes with disabilities is limited...
2016 / Kazuya Seo, Naoki Takahashi, Koichi Kawabata, Toshihito Mitsui -
Conservation of architectural paintings at Xiaonan Garden, former residence of Weng family in Changshu
Abstract Xiaonan Garden is the back garden at the Weng family’s former residence, a famed mansion in Jiangnan. Various architectural colored paintings in the Jiangnan style, including a rare paster colored painting, are preserved in the garden. This ...
2016 / Weijun He, Shi Hu, Lifang Ji -
Preface2016 /
-
Measurement of Temperature Distribution around a Vertical Fin by Mach-zehnder Interferometry
Abstract Interferometry is an optical non-intrusive technique becoming increasingly popular in the flow and heat transfer visualisation and measurement. In the present study, experimental investigation on heat transfer around an isothermal vertical...
2016 / Binoy Baby, B. Anooplal -
Shaping of Cell Chips at Rotary Milling
Abstract In accordance with the system approach to rotary cutting we have solved the control task, i.e. determination of the shape and sizes of the obtained chip depending on design and geometrical parameters of the cutting tool, its installation in ...
2016 / V.G. Shalamov, V.I. Guzeev, S.D. Smetanin -
Thermofluid-Acoustic Analysis of a Ranque-Hilsch Vortex Tube
Abstract This paper aims to present analysis of sound produced from a Ranque-Hilsch Vortex Tube. A microphone was used to record the sound produced close to the hot tube. It is observed that, for one configuration of RHVT, the sound produced...
2016 / Wirachman Wisnoe, Khairil Muhaimin Abd Rahman, Yusman Istihat, Valliyappan David Natarajan -
Modified Hartman-Schijve fitting of mode I delamination fatigue data and the resulting variation in threshold values Gthr
Abstract With a view toward applications in structural composite design, mode I (tensile opening) fatigue delamination test data obtained for carbon fiber-reinforced polymer-matrix (CFRP) composites have recently been (re-)analyzed with different...
2016 / Andreas J. Brunner, Ahmad Mujtaba, Steffen Stelzer, Rhys Jones -
Evaluation of Workpiece Surface Integrity Following Point Grinding of Advanced Titanium and Nickel Based Alloys
Abstract Experimental results are presented following point grinding of Ti-6Al-4V, gamma-TiAl and Udimet 720 nickel based superalloy using plain 15mm diameter electroplated superabrasive (CBN and diamond) wheels employing 46μm grit. Surface...
2016 / D.T. Curtis, S.L. Soo, D.K. Aspinwall, A.L. Mantle -
Applications for Frugal Product Customization and Design of Manufacturing Networks
Abstract Manufacturing is moving towards a new era of frugal innovation, exploiting customization and regionalization practices, where companies base their business on mobility and on adapting local market requirements, resulting to a new business...
2016 / D. Mourtzis, E. Vlachou, C. Giannoulis, E. Siganakis, V. Zogopoulos -
Determination of Shape Errors During Polygonal Turning of Polyhedrons with an Odd Number of Faces
Abstract In this article, the authors dwell upon the questions of shaping the outer surfaces of polyhedrons by polygonal turning. It has been found out that in the process of manufacturing polyhedrons with an odd number of faces, the calculated and...
2016 / M. Razumov, A. Grechukhin, A. Pykhtin -
The Impact on Organizational Structures of Model-based Mechatronic System Design
Abstract For an effective model-based mechatronic system engineering software tools are necessary which support collaboration between the involved disciplines, a single source of information and – among other things – enables integrated workflows....
2016 / A. Kellner, S. Ringhofer, P. Hehenberger, L. Weingartner, M. Friedl -
Study of the plastic behavior around the crack tip by means of thermal methods
Abstract In this work, the behaviour of two cracked stainless steel AISI 410 and C3FM was studied by means of a new procedure based on thermographic methods. A temperature model in time domain was considered in order to obtain information about the...
2016 / F. Ancona, R. De Finis, G.P. Demelio, U. Galietti, D. Palumbo