Materials engineering topic list of research papers
-
A New Fuzzy Model for Market Validation of Device Recycling Motor Oils
Abstract The market validation of any devices presents one of the most waste important tasks. There are many factors have a critical effect on market validation. These factors are defined by reverse logistic management team. In this paper, a new...
2016 / M. Pavlović, D. Tadić, S. Arsovski, A. Tomović, A. Pavlović -
Evaluation and Calibration of LCoS SLM for Direct Laser Structuring with Tailored Intensity Distributions
Abstract Tailored intensity distribution enables efficient microstructuring as the maximum pulse energy of an ultrashort-pulsed laser can be applied. Dynamic adaptation of the intensity profile can be realized by holographic laser beam shaping using ...
2016 / Johannes Strauß, Tom Häfner, Michael Dobler, Johannes Heberle, Michael Schmidt -
Experimental techniques for ductile damage characterisation
Abstract Ductile damage in metallic materials is caused by the nucleation, growth and coalesce of voids and micro-cracks in the metal matrix when it is subjected to plastic strain. A considerable number of models have been proposed to represent...
2016 / A. Sancho, M.J. Cox, T. Cartwright, G.D. Aldrich-Smith, P.A. Hooper, et al. -
Past, Present, and Future of the Pulse Examination (脈診 mài zhěn)
Abstract The pulse examination (脈診 mài zhěn) is a unique diagnostic approach of Traditional Chinese Medicine. The description of pulse examination in the history of Traditional Chinese Medicine is full of amazement and mythology. After researching...
2016 / Yuh-Ying Lin Wang, Sheng-Hung Wang, Ming-Yie Jan, Wei-Kung Wang -
Nanophase Formation of Portland Cement in the Presence of Disaccharides
Abstract Process of thermal dehydration modified (modifiers – isomerous disaccharide) cement pastes of the day's age studied by methods of electronic microscopy and the X-ray phase analysis. Dehydration of the modified cement stone is followed by...
2016 / Y. Ivaschenko, E. Shoshin, D. Timokhin -
Sensitivity Studies on Scour Detection Using Vibration-based Systems
Abstract The high profile failure of the Malahide viaduct in Dublin in late 2009 was attributed to erosion of the supporting soils around the bridge piers, commonly referred to as foundation scour. This is a widespread geotechnical-structural...
2016 / Luke J. Prendergast, Kenneth Gavin, Cormac Reale -
Multi-response Optimization in Drilling of Carbon Fiber Reinforced Polymer Using Artificial Neural Network Correlated to Meta-heuristics Algorithm
Abstract This paper aims to optimize the drilling process parameters using artificial neural network (ANN) linked with the most popular meta-heuristics technique such as Hybrid Particle Swarm Optimization Gravitational Search Algorithm (PSOGSA) and...
2016 / K. Shunmugesh, K. Panneerselvam -
Tool Wear in Soft Part Turning of High Performance Steel
Abstract This work reports on the machinability differentiation in semi finishing of three carburizing steel grades that are used in transmission components such as gears, crown wheels and pinions. A reference steel grade of type 20NiCrMo was...
2016 / Niclas Ånmark, Thomas Björk -
Enhancement in Time for Feature Extraction & Blending for Panoramic View Generation
Abstract This Paper concerns with the comparison of time taken to extract the image features. Several previous approaches have been used for panoramic image stitching on different qualities of images which affects the time taken for extracting and...
2016 / Shubhankit Saxena -
Biomimetic Potentials for Building Envelope Adaptation in Egypt
Abstract Biomimicry is a science that seeks sustainable solutions by emulating nature's time-tested 3.8 billion years of patterns and strategies. The paper is concerned with embodying the biomimetic strategies to building envelopes which shall offer ...
2016 / N. Nour ElDin, A. Abdou, I. Abd ElGawad -
Includes Knowledge of Dismantling Centers in the Early Design Phase: A Knowledge-based Design for Disassembly Approach
Abstract Nowadays, a large number of goods (e.g. appliances and electronic products) must be treated in dismantling centers after the conclusion of their lifecycle. Selective disassembly is necessary to accomplish environmental directives and to...
2016 / Claudio Favi, Michele Germani, Marco Mandolini, Marco Marconi -
Criteria for Energy-efficiency of Technological Processes, Technological Machines and Production Engineering
Abstract At present, a large number of methods for processing and forming of parts and products, technological processes and equipment have been created for their implementation. Trends towards improved productivity, accuracy, reliability,...
2016 / A.P. Kuznetsov, P. Blau, H.-J. Koriath, M. Richter -
Optimization Of The Fatigue Resistance Of Nitinol Stents Through Shot Peening
Abstract “Nitinol” (NiTi) is an intermetallic alloy of approximately equal atomic percentages of nickel and titanium that is widely used in less invasive and self-expanding implantable medical devices such as cardiovascular stents, due to its...
2016 / Konstantinos Dimakos, Andrea Mariotto, Fausto Giacosa -
On Global Optimization of Walking Gaits for the Compliant Humanoid Robot, COMAN Using Reinforcement Learning2013 / Houman Dallali, Petar Kormushev, Zhibin Li, Darwin Caldwell
-
Modified APC-OMS Technique for Memory Based Computing
Abstract In digital signal processing (DSP) memory based computing plays a vital role for to meet the progressive requirements of DSP. The memory based computing includes antisymmetric product coding (APC), odd multiple storage (OMS), APC-OMS...
2016 / Liya Paul, Reen Paul -
Damage evolution in metals under the gigacycle fatigue loading due to the contact with surface-active liquid
Abstract The Rehbinder effect (adsorption strength reduction effect) consists in a qualitative change of the development of multi-scale damage kinetics in a deformed sample in the presence of surfactants (in our case, liquid gallium). Its influence...
2016 / Mikhail V. Bannikov, Oleg B. Naimark -
Impact of Grinding Steel Chemical Composition on Chips Grain-size Composition
Abstract The study of sludge, collected after processing different makes of steel, is of big interest for the research of chip formation while grinding. Together with hard- and software it helps to establish qualitative and quantitative...
2016 / D.V. Ardashev -
Characterising resistance to fatigue crack growth in adhesive bonds by measuring release of strain energy
Abstract Measurement of the energy dissipation during fatigue crack growth is used as a technique to gain more insight into the physics of the crack growth process. It is shown that the amount of energy dissipation required per unit of crack growth...
2016 / J.A. Pascoe, R.C. Alderliesten, R. Benedictus -
Flow Visualization of Downhill Ski Racers Using Computational Fluid Dynamics
Abstract In downhill alpine skiing, racers often exceed speeds of 120km/h, with air resistance substantially affecting the overall race times. To date, studies on air resistance in alpine skiing have used wind tunnels and actual skiers to examine...
2016 / Takeshi Asai, Sungchan Hong, Koichi Ijuin -
Risk Analysis (Assessment) Using Virtual Reality Technology - Effects of Subjective Experience: An Experimental Study
Abstract Depending on the specific design phase and relevant goals, engineers have various options to visualize machine tool development. This study examined two types of visualization (e.g. concerning complexity, colors, animations, vividness)...
2016 / Patrick Puschmann, Tina Horlitz, Volker Wittstock, Astrid Schütz