Materials engineering topic list of research papers
-
Hydrodynamic Instability in High-speed Direct Laser Deposition for Additive Manufacturing
Abstract High speed direct laser deposition, when product forms from metal powder, transferred by gas-powder jet, supplied coaxially or non-coaxially to focused laser beam, in one of most prospective additive technologies for production parts for...
2016 / Gleb Turichin, Evgeny Zemlyakov, Olga Klimova, Konstantin Babkin -
Energy-efficient Drive Concepts in Metal-forming Production
Abstract Nowadays, efficient drive solutions for the production industry are more important than ever. In view of this, new energy-efficient drive concepts for forming presses and sheet metal feeding systems are developed at the IFUM. The novel...
2016 / Bernd Arno Behrens, Anas Bouguecha, Richard Krimm, Sergej Teichrib, Thomas Nitschke -
Experimental Investigation on the Mechanical Contribution of Roots to the Shear Strength of a Sandy Soil
Abstract A common soil-bio-engineering practice to prevent the erosion and the movement of soil along natural hill-slopes is the hydroseeding of herbs and shrubs, whose roots can contribute to the stability of the surficial layers of soil. So far a...
2016 / Marco Mazzuoli, Rossella Bovolenta, Riccardo Berardi -
Size Effect in Micro Machining of Steel Depending on the Material State
Abstract In machining of steel changes of the surface and boundary layer are induced through mechanical and thermal loads. The controlled generation of these material modifications, which determine the functional properties of components, is still...
2016 / Melanie Willert, Oltmann Riemer, Ekkard Brinksmeier -
Designing Knowledge Intensive Events
Abstract Nowadays a huge number of events are offered worldwide that aim at exchanging and generating knowledge. They come in many different formats and sizes: conferences, conventions, and other forms of meetings try to meet the expectations of...
2016 / Lukas Zenk, Thomas Fundneider, Markus Peschl -
Viscoelastoplastic bodies under cyclic loading in thermal-radiation fields
Abstract Deformation of viscoelastoplastic bodies in the neutron and thermal fluxes under a one-time loading has been studied previously in [1–3]. A mathematical model has been set forth in [4] for a cyclic deformation of elastoplastic bodies in a...
2016 / Atwa D. Zeyad -
Energy, Economical, Environmental Evaluation of a CCHP-Gshp System Based on Carbon Tax and Electric Feed in Tariff
Abstract In the paper, a new CCHP system is proposed. The proposed system consists of a power generation unit (PGU), an absorption chiller, a storage tank as well as a ground source heat pump (GSHP). Then two basic load following strategies...
2016 / Ligai Kang, Junhong Yang, Shuai Deng, Qingsong An, Jun Zhao, et al. -
Success Story Cutting
Abstract Cutting technologies are the engines behind manufacturing. Without cutting, none of our modern products would ever been put into service. Developing new materials directly needs research for process windows in cutting. Huge engineering...
2016 / K. Wegener, F. Kuster, S. Weikert, L. Weiss, J. Stirnimann -
Understanding effects of RAP on rheological performance and chemical composition of SBS modified binder using series of laboratory tests
Abstract The present study aims to evaluate rutting, fatigue, and rheological performances of a SBS co-polymer modified binder (PMB40) blended with different percentages (i.e., 0%, 15%, 25% and 40%) of reclaimed asphalt pavement (RAP) binder. The...
2016 / Dharamveer Singh, Dheeraj Sawant -
Immunomodulatory biomaterials and regenerative immunology2016 / Nihal Engin Vrana
-
Dual-band Bandpass Filter Using Stubs to Controllable Passband
Abstract The dual band bandpass filter is presented with square ring-resonator structure. The stubs are inserted between the inside and outside ring-resonator for adjusting the second band. The first band is designed for supporting WLAN system at...
2016 / Reungyot Lerdwanittip, Apirada Namsang, Phakkawat Jantree -
Experimental Study on Comparing Intensities of Burnishing and Machine Hammer Peening Processes
Abstract Many components in industrial practice need to be finished by surface modification processes in order to assure service properties like fatigue resistance, tribological properties and corrosion resistance. In order to compare the potential...
2016 / Franziska Lienert, Michael Gerstenmeyer, Stephan Krall, Christoph Lechner, Daniel Trauth, et al. -
The Technology Refinement of Soil Decontamination Contaminated with Petroleum Products by the Reagent Capsulation Method
Abstract The soil decontamination technology contaminated with oil products in emergency situations and due to the oil spill was examined. The decontamination technology is based on the oily waste encapsulation using alkaline reagent based on...
2016 / L.O. Shtripling, E.G. Kholkin, K.S. Larionov -
The Development of the Vortex Gas Pressure Regulator
Abstract Following the analysis and preliminary numerical calculation of the gas flow in the working cavity of the vortex pressure regulator its geometric parameters were defined and three-dimensional model was developed. The prototype of the vortex ...
2016 / A.Yu Uss, A.V. Chernyshev -
Effects of Hg/Co Toxicity in Soil on Biomolecules of Earthworm, Eisenia Fetida
Abstract Heavy metals act as toxicants to soil and crops at elevated level. Earthworms help in bioremediation process they remove heavy metal from the soil and accumulate them in their body tissues especially yellow cells. Depending upon the...
2016 / Chhavi Jatwani, R.K. Gupta, Reema Rai, Nitish Bansal -
Condition Monitoring of Lubricant in Static Mechanisms Using Pulse-Echo Ultrasound Technique
Abstract This paper proposes an active pulse-echo ultrasonic testing method to determine the lubricant condition in static mechanical components and assemblies. An ultrasonic inspection system was constructed to produce and receive back, high...
2016 / Marwan Ali, Milan Simic, Fadi Imad, Farrukh Nagi -
Effect of Feed on Sub-surface Deformation and Yield Strength of Oxygen-free Pitch Copper in Machining
Abstract The article deals with the influence of the machining induced surface integrity on tensile properties of 99.99% purity Oxygen-Free Pitch copper (OFC), used in nuclear and research facilities. The increase in the feed in machining was found...
2016 / Mike Olsson, Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl -
Surface and through thickness crack growth in cruciform specimens subjected to biaxial loading
Abstract Fatigue surface crack growth are studied through experiments and computations for aluminum alloy D16T. Subjects for studies are cruciform specimens under different biaxial loading with external semi-elliptical surface crack. The variation...
2016 / V. Shlyannikov, A. Zakharov, A. Lyagova -
Mechanical Fracture of Vanadium Dioxide During Thermal Cycling
Abstract The degree of vanadium dioxide VO2 mechanical fracture and solid solutions on its base V1-xFexO2 is quantified. Dependences of graded powder mass fraction m/M on the number of thermal cycles, affected by VO2 sample, and for vanadium dioxide ...
2016 / Vadim I. Surikov, Valery I. Surikov, N.А. Semenyuk, О.V. Lyah, Yu.V. Kuznetsova -
Development of a Procedure to Characterize Residual Stresses Induced by Drilling
Abstract Modeling residual stresses induced by drilling remains an issue. However, even if some models are under development, their validation is limited by the absence of a universal characterization method of residual stresses inside the hole....
2016 / Mathieu Girinon, Frédéric Valiorgue, Joël Rech, Eric Feulvarch