Materials engineering topic list of research papers
-
Iron-Ore Sintering Process Optimization / Optymalizacja Procesu Aglomeracji Rudy Żelaza2016 / M. Fröhlichová, D. Ivanišin, A. Mašlejová, R. Findorák, J. Legemza
-
Solubility of CO2 in 20 Wt. % Aqueous Solution of Piperazine
Abstract The aim of this work was to find out the carbon dioxide (CO2) gas solubility in 20wt. % aqueous piperazine (PZ) solution. For this purpose, SOLTEQ BP 22 solubility cell was used and experiments were conducted at temperatures (313.15 and...
2016 / Rizwan Safdar, Murugesan Thanabalan, Abdul Aziz Omar -
Simulation Model and Characteristics of the Cavitation Mixer with Hydrodynamic Grid
Abstract A promising method for obtaining homogeneous and high-dispersion emulsion is to create mixers with cavitation treatment of the mixed stream. The present research examines the hydrodynamic constant-flow mixer with a grid made of smooth...
2016 / E.K. Spiridonov, S.Y. Bityutskikh -
Correlation between Electron Mobility and Static Dielectric Permittivity of n-InSb2015 / K. Alfaramawi
-
The Tribological Properties of Laser Hardened Steel 42CrMo4 / Właściwości Tribologiczne Stali 42Crmo4 Hartowanej Laserowo2016 / W. Tarasiuk, A.I. Gordienko, A.T. Wolocko, J. Piwnik, B. Szczucka-Lasota
-
Accuracy and Computational Efficiency of 2D Urban Surface Flood Modelling Based on Cellular Automata
Abstract There is an emerging abundance of freely available high resolution (one meter or less) LIDAR data due to the advent of remote sensing, which enables wider applications of detailed flood risk modelling and analysis. Digital terrain surface...
2016 / Michael J. Gibson, Dragan A. Savic, Slobodan Djordjevic, Albert S. Chen, Stuart Fraser, et al. -
Influence of radiation on vertical wavy surface with constant heat flux: Using Keller box scheme
Abstract This paper is concerned to investigate the radiation effect on hydromagnetic flow along a vertical impermeable wavy texture. The wavy texture is considered to be heated with uniform flux. The flow behavior over the geometry is modeled...
2016 / Tariq Javed, Hussain Ahmad, Abuzar Ghaffari -
Study of Spectroscopic Properties of Pure and Nd Doped Ca3La2(BO3)4 Glasses
Abstract In this paper, we report pure and 5 mol% Nd doped Ca3La2 (BO3)4 glasses and their spectroscopic properties. A ternary system La2O-3CaO-4H3BO3 was adopted and glasses were prepared by using a conventional melt quenching technique. The...
2016 / Gajanan B. Harde, Gajanan G. Muley -
Study on crystallization phenomenon and thermal stability of binary Ni–Nb amorphous alloy2016 / S. Lesz, G. Dercz
-
Synthesis and Characterization of a Novel Nonlinear Optical Material Mg2Na2ZnB4O10
Abstract A novel borate compound with the chemical formula Mg2Na2ZnB4O10 (MNZB) has been synthesized first time from the 2MgO- Na2O-ZnO-2B2O3 system via solid-state reaction. The obtained polycrystalline borate material MNZB was characterized by...
2016 / Shivaji R. Dagdale, Gajanan G. Muley -
Normalisation Techniques for Slowly-converging Soils
Abstract The existence of a unique normal compression, NCL, and critical state line, CSL, for clean sands and clays in the state plane, v-lnp’, is generally assumed. Recently, some soils of either complex grading or mixed mineralogy did not exhibit...
2016 / Maria Cristina Todisco, Matthew R. Coop -
Data-driven modeling for water quality prediction case study: The drains system associated with Manzala Lake, Egypt
Abstract Manzala Lake, the largest of the Egyptian lakes, is affected qualitatively and quantitatively by drainage water that flows into the lake. This study investigated the capabilities of adaptive neuro-fuzzy inference system (ANFIS) to predict...
2016 / Mosaad Khadr, Mohamed Elshemy -
Thermoelectric properties of GeSe
Abstract The recently reported superior thermoelectric performance of SnSe, motivates the current work on the thermoelectric properties of polycrystalline GeSe, an analog compound with the same crystal structure. Due to the extremely low carrier...
2016 / Xinyue Zhang, Jiawen Shen, Siqi Lin, Juan Li, Zhiwei Chen, et al. -
Influence of Al grain structure on Fe bearing intermetallics during DC casting of an Al-Mg-Si alloy
Abstract 207mm diameter direct chill (DC) cast billets of 6063 aluminium-magnesium-silicon (Al-Mg-Si) alloy were produced with various different primary aluminium (α-Al) grain structures including feathery-dendrites, equiaxed-dendrites and...
2016 / S. Kumar, K.A.Q. O'Reilly -
Application of Quantification of Uncertainties Method in Detonation Simulation to Steven Test
Abstract Detonation sensitivity is important index for measuring initial capability high explosive. Steven impact test is one of the basic tests about gauging and has greatly increased the fundamental knowledge of practical predictions of impact...
2016 / Zheng Miao, Yu Xin -
Minority Carrier Lifetime of n-type Mono-crystalline Silicon Produced by Continuous Czochralski Technology and its Effect on Hetero-junction Solar Cells
Abstract The efficient use of the ingot material and high productivity of the continuous Czochralski (CCz) technology can help reduce the cost of n-type wafers which is one of the obstacles to the adoption of high performance n-type solar cells....
2016 / Han Xu, Xiaorang Tian -
Research of Water Resistance and Heat Resistance of Magnesium Phosphate Cements
Abstract The article deals with the perspectives of producing heat-resisting materials on the base of serpentine rocks (a by-product of asbestos production) and the factors preventing it. The section “Materials and methods” describes the methods...
2016 / A.A. Orlov, T.N. Chernykh -
Effect of compression Residual Stress on Fatigue Properties of Stainless Cast Steel
Abstract In this study, in order to clarify the fatigue properties under compressive mean stresses statement and to establish the accurate evaluation method of fatigue properties of materials with compressive residual stress at surface applied by...
2016 / T. Hanaki, Y. Hayashi, H. Akebono, M. Kato, A. Sugeta -
Characterization of Water Treatment Plant's Sludge and its Safe Disposal Options
Abstract Surface water Treatment for potable supplies typically involves coagulation, flocculation, Sedimentation, and filtration processes for removing colloidal as well as suspended solids from raw water. All water treatment plants (WTPs) produce...
2016 / T. Ahmad, K. Ahmad, M. Alam -
Electrochemical-controlled Characterization of the Corrosion Fatigue Behavior of Creep-resistant Magnesium Alloys DieMag422 and AE42
Abstract Magnesium alloys offer a high potential for lightweight construction, however their application range is limited due to their low corrosion resistance. In the present study the corrosion fatigue behaviors of the creep-resistant alloys...
2016 / Martin Klein, Frank Walther