Materials engineering topic list of research papers
-
Investigation of residual stresses in welded joints of heat-resistant magnesium alloy ML10 after electrodynamic treatment
Abstract In repair of aircraft structures of magnesium alloy ML10, the argon arc non-consumable electrode welding is used. In this case, the residual welding stresses occur in repair welds, being one of the causes for reducing the service...
2016 / L.M. Lobanov, N.A. Pashchin, O.L. Mikhodui, J.A. Khokhlova -
Numerical Modelling of Wetting Phenomena During Melting of PCM
Abstract Latent heat thermal energy storage (LHTES) units using phase change material (PCM) exhibit a high thermal capacity, but also a low charging and discharging power. Macro-encapsulation of PCM is one way of enhancing the heat transfer rate in...
2016 / Raghavendra Rohith Kasibhatla, Andreas König-Haagen, Dieter Brüggemann -
A Study of Different Texture Features Based on Local Operator for Benign-malignant Mass Classification
Abstract In this paper, a comparative analysis of different texture features based on local operator has been produced for the determination of mammographic masses as benign or malignant. Local Binary Pattern (LBP), LBP Variance (LBPV), and...
2016 / Rinku Rabidas, Abhishek Midya, Jayasree Chakraborty, Wasim Arif -
Pavement foundation stiffness testing – a new regime2010 / M. W. Frost, P. R. Fleming, M. Gordon, J. P. Edwards
-
Robust Stability of Machining Operations in Case of Uncertain Frequency Response Functions
Abstract Prediction of machine tool chatter requires a dynamic characterization of the machine-tool-workpiece system by means of frequency response functions (FRFs). Stability lobe diagrams are sensitive to the uncertainties of the measured FRF,...
2016 / David Hajdu, Tamas Insperger, Gabor Stepan -
Neural network based identification of hysteresis in human meridian systems2016 / Yonghong Tan, Ruili Dong, Hui Chen, Hong He
-
Imaging technologies for monitoring the safety, efficacy and mechanisms of action of cell-based regenerative medicine therapies in models of kidney disease
Abstract The incidence of end stage kidney disease is rising annually and it is now a global public health problem. Current treatment options are dialysis or renal transplantation, which apart from their significant drawbacks in terms of increased...
2016 / Jack Sharkey, Lauren Scarfe, Ilaria Santeramo, Marta Garcia-Finana, Brian K. Park, et al. -
Investigating the Synergistic Effect of Bauxsol™ in an Epoxy Intumescent Coating System
Abstract Bauxsol™ (BX) is a refined alumino-silicate waste derived from the brine neutralization of bauxite residue (BR). Due to this brine treatment, Bauxsol™ contains hydrotalcite-like minerals in addition to the zeolitic minerals, metal oxides...
2016 / A.I. Arogundade, F. Ahmad, A.H. Bhat, Q.F. Gillani, P.S.M.B. Megat-Yusoff -
Forming Of Spherical Titanium Cups From Circular Blanks With Cutouts On The Perimeter2015 / P. Lacki, J. Adamus, W. Więckowski, J. Winowiecka
-
Effect of External Force on the Dynamics of Nonlinearly Coupled Self Excited Oscillators
Abstract This work deals with effect of external force on the dynamics of mutually coupled self-excited oscillators. Self-excited oscillators with linear and non-linear coupling are considered. The phase-amplitude equations or Adler equations are...
2016 / Rohit Rajeev, M. Govind, Bipin Balaram -
Detection of Bundle Branch Block using Adaptive Bacterial Foraging Optimization and Neural Network
Abstract The medical practitioners analyze the electrical activity of the human heart so as to predict various ailments by studying the data collected from the Electrocardiogram (ECG). A Bundle Branch Block (BBB) is a type of heart disease which...
2016 / Padmavthi Kora, Sri Rama Krishna Kalva -
A balanced-force control volume finite element method for interfacial flows with surface tension using adaptive anisotropic unstructured meshes
Abstract A balanced-force control volume finite element method is presented for three-dimensional interfacial flows with surface tension on adaptive anisotropic unstructured meshes. A new balanced-force algorithm for the continuum surface tension...
2016 / Zhihua Xie, Dimitrios Pavlidis, Pablo Salinas, James R. Percival, Christopher C. Pain, et al. -
X-ray computed tomography for fast and non-destructive multiple pearl inspection
Abstract X-ray computed tomography displays a highly valuable nondestructive testing tool in various fields. A major disadvantage of this method comprises its high operating costs. Therefore, the reduction of the scanning times would be highly...
2016 / J. Rosc, V.M.F. Hammer, R. Brunner -
Microstructure of Hot-Deformed Cu-3Ti Alloy2016 / A. Szkliniarz, W. Szkliniarz, L. Blacha, G. Siwiec
-
Mechanical Properties of a Flame-resistant Mg Alloy as a Next-generation Transportation Structural Material
Abstract Mg alloys could potentially be used as the structural materials of next-generation high-speed transportation systems on account of their extremely low density (1.7 Mg/m3). However, the plastic formability of Mg alloys at room temperature is ...
2016 / Tsutomu Ito, Gaku Saito, Naotaka Uehigashi, Hisashi Mori -
Effect of Air Entraining Admixture on Corrosion of Reinforced Concrete
Abstract Reinforced concrete structures affected by the attack, sulfates, carbonates and chlorides. The most important factor in the corrosion of reinforced concrete structures is due to chloride attack and prevent corrosion of the reinforcing steel ...
2016 / Hamid Eskandari, Alireza Mozafari Nic, Anis Ghanei -
Acid resistance of calcium aluminate cement–fly ash F blends2016 / Tatiana Pyatina, Toshifumi Sugama
-
Discrete Event Simulation Modelling for Dynamic Decision Making in Biopharmaceutical Manufacturing
Abstract With the increase in demand for biopharmaceutical products, industries have realised the need to scale up their manufacturing from laboratory-based processes to financially viable production processes. In this context, biopharmaceutical...
2016 / Madhu Sachidananda, John Erkoyuncu, Daniel Steenstra, Sandra Michalska -
Experimental Study On Fracture Property Of Double Cantilever Beam Specimen With Aluminum Foam2015 / Y.C. Kim, H.K. Choi, J.U. Cho
-
Daylighting and energy performance of a building for composite climate: An experimental study
Abstract The present study includes overall energy saving through thermal as well as daylighting for composite climate for the building known as SODHA BERS COMPLEX (SBC) situated at Varanasi, India. The building has been designed including all the...
2016 / Madhu Sudan, G.N. Tiwari