Materials engineering topic list of research papers
-
The effect of a bonding agent and thermo-mechanical cycling on the bond strength of a glass-ceramic to gold and cobalt-chromium alloys2014 / Flávia Trindade, Lilian Anami, Júlia da Costa Lima, Luis Gustavo de Vasconcellos, Ivan Balducci, et al.
-
A Two Fold Expert System for Yawning Detection
Abstract One of the prominent indicators of drowsiness is yawning. The main intention for a real-time application such as detecting the driver's yawning is that the response of the detector must be as quick as possible. A novel yawning detection...
2016 / C. Anitha, M.K. Venkatesha, B. Suryanarayana Adiga -
The Analysis of ANSYS Package Applicability for Calculating the Elements of the Heat Losses Recuperation System in the Power Unit of the Mobile Compressor Unit
Abstract The article analyses the issues of the calculation technique applicability for the fuel heating process in the channels of the elements comprising the heat losses recuperation system for the internal combustion engines (ICE). The technique...
2016 / G.I. Chernov, V.K. Vasilyev, P.D. Balakin, A.M. Kalashnikov -
Novel fibre-like crystals in thin films of Poly Ether Ether Ketone (PEEK)
Abstract This paper highlights the fabrication and characterisation of a new type of crystal in quenched, cooled and annealed PEEK films. Following this process, a “fibre-like” crystal structure has been identified. Across the film surface, these...
2016 / Yuan Wang, Binling Chen, Ken E. Evans, Oana Ghita -
Experimental Determination of Resultant Roll Force at Hot Plate Mill 5000
Abstract The paper deals with the methods to increase the accuracy of determination of roll torque on the motor shaft of the hot plate mill. Experiments are carried out by rolling of different steel grads eat the hot plate mill 5000. Thus, as a...
2016 / O.A. Gasiyarova, S.S. Voronin, E.A. Maklakova, V.R. Gasiyarov -
Enhanced Turbulence in the Taylor-Couette Flow System
Abstract The Taylor-Couette system keeps making subject to countless studies. It is used in catalytic reactors, electrochemistry, photochemistry, biochemistry and polymerization, as well as in mass transfer operations (extraction, tangential...
2016 / Hamid Oualli, Mahmoud Mekadem, Ahcene Bouabdallah, Mohamed Gad-El-Hak -
Fatigue crack growth behaviour of the 6082-T6 aluminium using CT specimens with distinct notches
Abstract This paper presents a study aiming at characterizing the fatigue crack growth behaviour of the 6082-T6 aluminium alloy using standard CT specimens. The fatigue crack growth threshold is also characterized according to the ASTM E 647...
2016 / José A.F.O. Correia, Abílio M.P. De Jesus, Ana S.F. Alves, Grzegorz Lesiuk, Paulo J.S. Tavares, et al. -
Targeted energy transfer and modal energy redistribution in automotive drivetrains2016 / E. Motato, A. Haris, S. Theodossiades, M. Mohammadpour, H. Rahnejat, et al.
-
A technique for determining Young's modulus of biological objects using atomic-force microscopy in the wide temperature range below Rt
Abstract In the paper, we suggest widening the scope of cryogenic atomic-force microscopy in order to determine Young's modulus of biological objects over a temperature range stretching from 30 to 300K. A new technique assumes some modification of...
2016 / Kseniya I. Krymskaya, Nataliya V. Andreeva, Aleksey V. Filimonov -
Attaining high mid-temperature performance in (Bi,Sb)2Te3 thermoelectric materials via synergistic optimization2016 / Zhaojun Xu, Haijun Wu, Tiejun Zhu, Chenguang Fu, Xiaohua Liu, et al.
-
Natural Fiber Reinforced Composites: A Review on Potential for Corrugated Core of Sandwich Structures2016 / A.F. Jusoh, M.R.M. Rejab, J.P Siregar, D. Bachtiar
-
The Challenges in Achieving a Circular Economy within Leather Recycling
Abstract Over the past two decades there has been a rapid growth in tanning and leather manufacturing in developing countries, an undesirable by-product of this is an increase in waste associated with leather products. End-of-life management options ...
2016 / T. Pringle, M. Barwood, S. Rahimifard -
Thin-plate-type Embedded Ultrasonic Transducer Based on Magnetostriction for the Thickness Monitoring of the Secondary Piping System of a Nuclear Power Plant
Abstract Pipe wall thinning in the secondary piping system of a nuclear power plant is currently a major problem that typically affects the safety and reliability of the nuclear power plant directly. Regular in-service inspections are carried out to ...
2016 / Taehoon Heo, Seung Hyun Cho -
Design of Highly Porous Hydroxyapatite Scaffolds by Conversion of 3D Printed Gypsum Structures – A Comparison Study
Abstract Hydroxyapatite (HA) is a bioceramic material with excellent biological properties. However, these properties are strongly dependent of its crystallinity degree, with high values of crystallinity associated to poor resorption rates and...
2016 / Alan C.S. Dantas, Debora H. Scalabrin, Roberta De Farias, Amanda A. Barbosa, Andrea V. Ferraz, et al. -
Model-based Sustainability Assessment – An Enabler for Transition to Sustainable Manufacturing
Abstract The “sustainable manufacturing” concept has been discussed by researchers and manufacturers for decades. Still, a transition to sustainable manufacturing is limited due to constraints such as the lack of a practical definition of...
2016 / Anastasiia Moldavska -
Workflow Enabled data Processing in a Concurrent Engineering Environment
Abstract Knowledge, information and data hold the key for growth and continuous sustenance in any organization. However, flow of this information and data across inter disciplinary departments to authorized personnel ensures the authencity and...
2016 / Sam George, K. David -
Understanding sodium-ion diffusion in layered P2 and P3 oxides via experiments and first-principles calculations: a bridge between crystal structure and electrochemical performance2016 / Shaohua Guo, Yang Sun, Jin Yi, Kai Zhu, Pan Liu, et al.
-
Results of the Study of Anti-wear Properties of the Exhaust Motor Oil
Abstract The results of the testы of exhaust partially synthetic and synthetic motor oils are presented the criterion for evaluation of anti-wear properties of oils was justified, a method for determining of the state of the filtration system was...
2016 / Yu.N. Bezborodov, N.N. Lysyannikova, E.G. Kravcova -
A Simple and Efficient X-FEM Approach for Non-planar Fatigue Crack Propagation
Abstract A simple and efficient extended finite element method (XFEM) approach has been presented to solve the 3-D fatigue crack propagation problems. In X-FEM, the crack is approximately described by local signed distances of the nodes around the...
2016 / Shu Yixiu, Li Yazhi -
Discrete dislocation and crystal plasticity analyses of load shedding in polycrystalline titanium alloys
Abstract The focus of this paper is the mechanistic basis of the load shedding phenomenon that occurs under the dwell fatigue loading scenario. A systematic study was carried out using a discrete dislocation plasticity (DDP) model to investigate the ...
2016 / Zebang Zheng, Daniel S. Balint, Fionn P.E. Dunne