Materials engineering topic list of research papers
-
Improvement of Geometrical Accuracy of Micro Holes Machined Through Micro Abrasive Jet Machining
Abstract Assembling of various parts and subassembly needs the closer attention on the geometrical accuracy of the part apart from the dimensional tolerances. Micro holes machined through micro abrasive jet machining are tapered, resulting in poor...
2016 / Abhishek Kumar, Somashekhar S. Hiremath -
Extraction of EMG signal in a software compatible format from an online database using WFDB package
Summary The electromyography (EMG) is an electro diagnostic procedure for evaluating the electrical activity of skeletal muscles. It is very difficult to deduce the structure and activation of surrounding muscle tissue from needle-detected EMG...
2016 / Neelkanth Bhardwaj, Parul Chopra, Asha Rani, Shivangi Agarwal -
Microcontroller Based Orbital Motion Shaker
Abstract A novel procedure of controlling various environmental conditions, shaking speed and duration for shaking of liquid/ semi solid required for microbiology/ chemical research laboratories with the use microcontroller is presented in this...
2016 / Arshi Mohini -
Simplified Method for Shear Strength Prediction of Confined Masonry Walls Subjected to in Plane Loads
Abstract The paper deals with the shear strength prediction of confined masonry wall subject to in-plane horizontal loading and to investigate the possibility of using strut and tie model for predicting the ultimate strength of confined masonry...
2016 / P.P. Sreejith, P.P. Sivan, A. Praveen, C. Gajendran, V. Nisha -
Maximum Utility Item Sets for Transactional Databases Using GUIDE
Abstract The issue of high utility mining is finding the majority of the high utility item sets in a value-based database. Most calculations discover high utility item sets in two stages. The initial step distinguishes the greater part of the...
2016 / Divvela Srinivasa Rao, V. Sucharita -
Preparation of Chitosan- CMC Blends and Studies on Thermal Properties
Abstract Chitosan be a biopolymer, which is an amino polysaccharide resultant from the N-deacetylation of Chitin. It is an ordinary polymer because of the occurrence of degradable enzyme Chitosanase. Chitosan is blend with natural polymer CMC with...
2016 / Sari Thomas, P.A. Soloman, V.O. Rejini -
Microstructural changes during deformation of AISI 300 grade austenitic stainless steels: Impact of chemical heterogeneity
Abstract The present work points out the importance of chemical heterogeneity on the destabilization of austenitic structure and the formation of deformation induced martensite (DIM) in AISI 300 grade austenitic stainless steels (ASSs) of different...
2016 / Jiří Man, Ivo Kuběna, Marek Smaga, Ondřej Man, Antti Järvenpää, et al. -
Microstructural changes of Y-doped V-4Cr-4Ti alloys after ion and neutron irradiation
Abstract High-purity Y-doped V-4Cr-4Ti alloys (0.1–0.2wt. % Y), manufactured by the National Institute for Fusion Science (NIFS), were used for this study. Heavy-ion and fission-neutron irradiation was carried out at temperatures 673–873K. During...
2016 / H. Watanabe, K. Yamasaki, A. Higashijima, H. Taguma, T. Nagasaka, et al. -
Development of a Novel Solution to Enable Integration and Interoperability for Cloud Manufacturing
Abstract Nowadays, manufacturing enterprises have been faced with a globalized competitive environment. In this fierce condition, Cloud Manufacturing paradigm emerged as a promising concept for competition. It provides effective solutions and tools...
2016 / Jalal Delaram, Omid Fatahi Valilai -
TS-Fuzzy Based Adaptive PEVs Charging Control for Smart Grid Frequency Stabilization Under Islanding Condition
Abstract This paper presents Takagi-Sugeno (TS) fuzzy based adaptive charging power control of plug-in electric vehicles (PEVs) connected to smart grid, intended to improve the performance of frequency stabilization for smart grid and to reduce the...
2016 / Chaowanan Jamroen, Pipatpan Namproom, Sanchai Dechanupaprittha -
Simulation of Stirring in Stir Casting
Abstract Now-a-days, Aluminum Matrix Composites (AMCs) are extensively used in industrial applications. For AMCs, stir casting is the cheapest and most flexible productiontechnique. Homogeneity of the reinforcement particle in the final cast...
2016 / K. Vishnu Prasad, K.R. Jayadevan -
Study of the Effects of Seasonal Climate Variations on Hybrid Power Systems Using Power Pinch Analysis
Abstract The role of renewable energy (RE) resources as clean alternatives to fossil fuel in power generation has been increasing. Widespread deployment of RE sources in Hybrid Power Systems (HPS) however can be a challenging task due to the...
2016 / Nor Erniza Mohammad Rozali, Muhammad Syu‘aib Mohamed Yahaya -
The potential of silicon anode based lithium ion batteries2016 / Ranjan Dash, Sreekanth Pannala
-
Cortical Bone as a Biomimetic Model for the Design of New Composites
Abstract Composite materials are widely used to build structures for their great mechanical performance combined with a low weight. However, the relatively low toughness of some composite materials is often a limitation as it can cause sudden...
2016 / Libonati Flavia, Vergani Laura -
Target-oriented Prototyping in Highly Iterative Product Development
Abstract The realization of radical innovations is a critical success factor in today's markets. When traditional sequential development processes are employed the high degree of uncertainty connected to these innovations results in a long and...
2016 / T. Gartzen, F. Brambring, F. Basse -
Screening of freshwater fungi for decolorizing multiple synthetic dyes2016 / Panpan Yang, Wenxiao Shi, Hongkai Wang, Hongmei Liu
-
Comment on "A bacterium that degrades and assimilates poly(ethylene terephthalate)"2016 / Y. Yang, J. Yang, L. Jiang
-
Immobilization of Heavy Metals in Natural Zeolite-blended Cement Pastes
Abstract The toxic wastes containing heavy metals are conducive to serious environmental problems at the contamination of water, air and soil. The ability of alumino-silicate systems to immobilize heavy metals from hazardous wastes by solidification ...
2016 / Martin Vyšvařil, Patrik Bayer -
Continuum level simulation of the grain size and misorientation effects on hydrogen embrittlement in nickel
Abstract This paper addresses the size and misorientation effects on hydrogen embrittlement of a four grain nickel aggregate. The grain interior is modelled with orthotropic elasticity and the grain boundary with cohesive zone technique. The grain...
2016 / Haiyang Yu, Jim Stian Olsen, Jianying He, Zhiliang Zhang -
Correlation Between Substrate Morphology and the Initial Stages of Epitaxial Organic Growth: PTCDA/Ag(111)2016 / Pierre L. Lévesque, Helder Marchetto, Thomas Schmidt, Florian C. Maier, Hans-Joachim Freund, et al.