Materials engineering topic list of research papers
-
Tool wear during high speed turning in situ TiCp/TiBw hybrid reinforced Ti-6Al-4V matrix composite
Abstract Chipping, adhesive wear, abrasive wear and crater wear are prevalent for both the polycrystalline diamond (PCD) and the carbide tools during high speed turning of TiCp/TiBw hybrid reinforced Ti-6Al-4V (TC4) matrix composite (TMCs). The...
2016 / Ge Yingfei, Xu Jiuhua, Huan Haixiang -
Quantifying Degradation of Railway Ballast Using Numerical Simulations of Micro-deval Test and In-situ Conditions
Abstract Throughout the life of the track, ballast grains wear as a result of both the trains passing over the track and the maintenance operations (tamping). The morphology of the grains is changed: they lose angularity and fine particles are...
2016 / Ivan Deiros, Charles Voivret, Gaël Combe, Fabrice Emeriault -
Effects of Tool Geometry and Process Parameters on Delamination in CFRP Drilling: An Overview
Abstract Fiber reinforced polymers (FRPs) show advantageous physical-mechanical, thermal, and dielectric characteristics, making them promising candidates for weight reduction in structural applications. However, machinability is often difficult...
2016 / Ruslan Melentiev, Paolo C. Priarone, Matteo Robiglio, Luca Settineri -
Analysis of the Surface Integrity when Nitriding AISI 4140 Steel by the Sink Electrical Discharge Machining (EDM) Process
Abstract The aim of this this work is to demonstrate the feasibility of nitriding AISI 4140 steel using electric discharges produced by sink EDM equipment. This was performed using a copper electrode, and mixed deionized water and urea as the...
2016 / Rogério F. Santos, Ernane R. Silva, Wisley F. Sales, Alberto A. Raslan -
Nonlinear Dynamics of Electro-mechanical System Composed of Two Pendulums and Rotating Hub
Abstract Dynamics of a structure composed of two pendulums attached to a rotating rigid hub is analysed in the paper. The system is rotating in a horizontal plane so the gravity force does not influence its motion. Both pendulums are treated as...
2016 / Zofia Szmit, Jerzy Warminski -
Study of the Moisture Behavior of Newly Developed Plasters Applied on Brick Pillars
Abstract As part of research works devoted to the development of silicate thermal insulation materials, two mixtures of plasters based on lightweight aggregate and on traditional and alternative binders were designed. The laboratory-prepared...
2016 / Jitka Hroudová, Martin Sedlmajer, Jiří Zach, Jana Pařílková -
Fracture Mechanics in Biology and Medicine
Abstract Many biological materials have load-bearing functions: examples include bone, cartilage, wood, insect cuticle and eggshell. These materials have evolved into structures such as skeletal parts, wings, plant stems and shells. This paper...
2016 / David Taylor -
3DSEM: A 3D microscopy dataset
Abstract The Scanning Electron Microscope (SEM) as a 2D imaging instrument has been widely used in many scientific disciplines including biological, mechanical, and materials sciences to determine the surface attributes of microscopic objects....
2015 / Ahmad P. Tafti, Andrew B. Kirkpatrick, Jessica D. Holz, Heather A. Owen, Zeyun Yu -
Novel Solar Thermal Collector Systems in Polymer Design – Part 5: Fatigue Characterization of Engineering PA Grades for Pressurized Integrated Storage Collectors
Abstract A novel aging test method considering the superimposed mechanical and environmental (temperature and environmental medium) loads representative for pressurized integrated storage collectors (ICS) is described. Engineering polyamide (PA)...
2016 / Joerg Fischer, Patrick R. Bradler, Mathias Schlaeger, Gernot M. Wallner, Reinhold W. Lang -
Assessment Strategies for Composite-metal Joining Technologies – A Review
Abstract Mixed material constructions, especially composite-metal structures, are widely applied in industry. Today many different joining technologies exist. However, the tools are missing that support decision making for the most suitable...
2016 / Josefine Jahn, Max Weber, Johannes Boehner, Rolf Steinhilper -
Effect of 32.5 and 42.5 Cement Grades on ANN Prediction of Fibrocement Compressive Strength
Abstract This research synthesizes findings from the literature review and experimental investigation which divided into two phases. Phase one included the design artificial neural network (ANN) to predict ferrocement compressive strength due to...
2016 / Hamid Eskandari, Morteza Tayyebinia -
Municipal Solid Waste Management
Abstract Solid waste management all over world is looked as major challenge to civil bodies. Pune corporation has taken initiatives to collect, segregate and treat solid waste and system for handling around 1600 MT / day is operative. Composting,...
2016 / Ajaykumar Soni, Deepak Patil, Kuldeep Argade -
Systematic probabilistic design methodology for simultaneously optimizing the ship hull–propeller system2016 / Ehsan Esmailian, Hassan Ghassemi, Hassan Zakerdoost
-
Comparison of Microstructure and Mechanical Properties of Induction and Vacuume Brazed Joint of Titanium Via Copper and Ag-Cu Eutectic Filler Metal / Mikrostruktura I Właściwości Mechaniczne Połączeń Tytanu Lutowanych Indukcyjnie I Próżniowo Z Użyciem Spoiwa Miedzianego I Eutektycznego Ag-Cu2016 / M. Różański, D. Majewski, K. Krasnowski
-
Increasing of the Efficiency of Flexible Manufacturing System
Abstract Management of universal shelf stacker process many varied operations, whose are different in difficulty of solved problems, time of reaction of controller and next parameters. Usually is used one controller with all functions, which have...
2016 / Boris Yakimovich, Alexander Korshunov, Sviatskii Vladislav -
Yb-fibre Laser Welding of 6 mm Duplex Stainless Steel 2205
Abstract Duplex stainless steel (DSS) is one of the materials of choice for structural and nuclear applications, having high strength and good corrosion resistance when compared with other grades of stainless steel. The welding process used to join...
2016 / M. Bolut, C.Y. Kong, J. Blackburn, K.A. Cashell, P.R. Hobson -
The dose of gamma radiation from building materials and soil2016 / Goran Manić, Vesna Manić, Dragoslav Nikezić, Dragana Krstić
-
DEM Analysis of Railtrack Ballast Degradation under Monotonic and Cyclic Loading
Abstract The deformation and the degradation of ballast significantly affect the performance of the railway track. In this study, the discrete element method (DEM) was used to investigate the deformation behavior and degradation characteristics of...
2016 / Jiangu Qian, Jianbo Gu, Xiaoqiang Gu, Maosong Huang, Linlong Mu -
Spin-Structured Multilayers: A New Class of Materials for Precision Spintronics2016 / Kai Schlage, Lars Bocklage, Denise Erb, Jade Comfort, Hans-Christian Wille, et al.
-
A smart experimental setup for vibration measurement and imbalance fault detection in rotating machinery
Abstract Rotor imbalance is the most common cause of machine vibration. In practice, rotors can never be balanced perfectly owing to manufacturing errors such as porosity in casting, non-uniform density of materials, manufacturing tolerances, and...
2016 / Guilherme Kenji Yamamoto, Cesar da Costa, João Sinohara da Silva Sousa