Materials engineering topic list of research papers
-
EDS Analysis of Flank Wear and Surface Integrity in Machining of Alloy 718 with Forced Coolant Application
Abstract There has been extensive research on forced coolant application, usually known as high pressure coolant, in machining heat resistant super alloys. This technology has shown to improve the tool life, chip segmentation, surface integrity and...
2016 / Henrik Jäger, Nageswaran Tamil Alagan, Jonas Holmberg, Tomas Beno, Anders Wretland -
A Carbonaceous Membrane based on a Polymer of Intrinsic Microporosity (PIM-1) for Water Treatment2016 / Hee Joong Kim, Dong-Gyun Kim, Kyuchul Lee, Youngbin Baek, Youngjae Yoo, et al.
-
Misfit Strain Relaxation of Ferroelectric PbTiO3/LaAlO3 (111) Thin Film System2016 / Y. B. Xu, Y. L. Tang, Y. L. Zhu, Y. Liu, S. Li, et al.
-
Three study cases of growth morphology in minerals: Halite, calcite and gypsum
Abstract Beyond fundamental aspects of crystal growth and morphology, the growth of minerals is a challenging subject because in most cases we face a problem with unknown growth conditions. Actually, in the field of geological studies, we have to...
2016 / Dino Aquilano, Fermín Otálora, Linda Pastero, Juan Manuel García-Ruiz -
Machining of Additively Manufactured Parts: Implications for Surface Integrity
Abstract Additive manufacturing methods continue to move towards production ready technologies with the widely extolled virtues of rapid transition from design to part and enhanced design freedoms. However, due to fundamental limitations of laser...
2016 / Olusola Oyelola, Peter Crawforth, Rachid M'Saoubi, Adam T. Clare -
Synthesis and characterization of Polyaniline composite with Shell membrane2016 / Yuki Kaitsuka, Hiromasa Goto
-
Simultaneous Machining of a Material Combination with an Internally and Externally Cooled Cutting Insert
Abstract This paper discusses the machining of cylinder running faces of aluminum engine blocks with reinforced, arc-sprayed cylinder walls. Such special material combinations and, therefore, processing conditions are common in the automotive...
2016 / F. Bleicher, J. Brier, A. Siller -
Entropy and Energy Dissipation of a Braided River System
Abstract The randomness in morphology of the Brahmaputra River is very common because of its high flow variability and erodible banks. The river is severely braided with no permanent bank line and varies its width by 1.2km to 18km. During the...
2016 / Vinay Chembolu, Subashisa Dutta -
An Experimental Study on Cutting Forces in Ultrasonic Assisted Drilling
Abstract This paper presents the effect of imposing ultrasonic vibration on conventional drilling. The cutting force was compared between conventional drilling (CD) and ultrasonic assisted drilling (UAD). With numerical calculations and analytical...
2016 / B. Vakili Azghandi, M.A. Kadivar, M.R. Razfar -
Schottky barrier at graphene/metal oxide interfaces: insight from first-principles calculations2017 / Kai Cheng, Nannan Han, Yan Su, Junfeng Zhang, Jijun Zhao
-
Ultrasonic cavitation for obtainment of nanometric sized particles2016 / A Santos, R Guzmán, J Espinosa, J Estrada
-
Oxygen vacancy ordering induced displacements of cations in yttria-stabilized zirconia2016 / Yanguo Wang, Canying Cai, Liang Li, Li Yang, Yichun Zhou, et al.
-
Performance Evaluation of a Hybrid Cooling–lubrication System in Micro-milling of Ti6Al4V Alloy
Abstract In this paper, a hybrid system was designed for cooling and lubrication in micro-milling of Ti6Al4V alloy. This hybrid system is based on mixing the oil with chilled air. The effect of the hybrid system on cutting performance is evaluated...
2016 / K. Aslantas, A. Çicek, İ. Ucun, M. Percin, H.E. Hopa -
Process Monitoring of Abrasive Waterjet Formation
Abstract Difficult to machine materials require innovative processing solutions for a stable and high quality contouring process of complex forms. Abrasive waterjet cutting gains in importance due to the continuous development of novel high...
2016 / M. Putz, M. Dittrich, M. Dix -
Flexural, impact, rheological and physical characterizations of POM reinforced by carbon nanotubes and paraffin oil2016 / Samy Yousef, Annamaria Visco, Giovanna Galtieri, James Njuguna
-
12th International Conference on Materials Chemistry2016 / Anthony Harriman
-
Research Trends of Soft Actuators based on Electroactive Polymers and Conducting Polymers2016 / K Kaneto
-
Aluminium surface treatment with ceramic phases using diode laser2016 / K. Labisz, T. Tański, Z. Brytan, W. Pakieła, M. Wiśniowski
-
Effect of prior sputter deposition of pure aluminium on the corrosion behaviour of anodized friction stir weld of dissimilar aluminium alloys
Abstract The effectiveness of the anodic oxide layer formed by a novel processing technique (pre sputter-deposition prior to anodizing) for the corrosion protection of friction stir welds of dissimilar aluminium alloys has been investigated. Two...
2016 / U. Donatus, G.E. Thompson, X. Zhou -
The National Ignition Facility: Transition to a User Facility2016 / E. I. Moses, J. Atherton, L. Lagin, D. Larson, C. Keane, et al.