Materials engineering topic list of research papers
-
Influence of Cutting Edge Geometry on Deformation Induced Hardening when Cryogenic Turning of Metastable Austenitic Stainless Steel AISI 347
Abstract In recent years deformation induced surface hardening was carried out to enhance the component performance of metastable austenitic steels. To be able to induce such a phase transformation from austenite to martensite in the workpiece...
2016 / Patrick Mayer, Benjamin Kirsch, Ralf Müller, Steven Becker, Erik v. Harbou, et al. -
Biotechnology landscape in cancer drug discovery2015 / Monica Neagu, Radu Albulescu, Cristiana Tanase
-
Living Cell Factories - Electrosprayed Microcapsules and Microcarriers for Minimally Invasive Delivery2015 / Syeda M. Naqvi, Srujana Vedicherla, Jennifer Gansau, Tom McIntyre, Michelle Doherty, et al.
-
Evaluation of helium effect on ion-irradiation hardening in pure tungsten by nano-indentation method
Abstract As-received and recrystallized pure tungsten (W) were irradiated with 6.4MeV Fe3+ up to 2dpa with or without He+ at 300°C, 500°C, 700°C and 1000°C respectively. Irradiation hardening was measured by the nano-indentation method. An equation...
2016 / Zhexian Zhang, Eva Hasenhuetl, Kiyohiro Yabuuchi, Akihiko Kimura -
Simulation of an Exhaust Heat Driven Rankine-cycle for Heavy-duty Diesel Engines
Abstract High-efficiency vehicle engines play an important role in the context of low-carbon cities. An auspicious approach to reduce the emissions of internal combustion engines and make them more fuel efficient is exhaust heat recovery by an...
2016 / Jan Wiedemann, Roland Span -
The Experimental Study of Palaeolithic Heat-Treatment Technology: A Case from the Shuidonggou Rock Resources, North-West China2015 / Y. Guan, Z. Y. Zhou, Y. Huan, X. Gao
-
Simulation study of cutting sugarcane using fine sand abrasive waterjet
Abstract Current rotary blade choppers for sugarcane harvesting have the disadvantage of becoming clogged with leaves/cane around the rotating blades causing them to hit the ground and rocks that result in rapid blade wear and tear. Dull blades...
2016 / Somjet Thanomputra, Thanya Kiatiwat -
The Ndop plain clayey materials (Bamenda area – NW Cameroon): Mineralogical, geochemical, physical characteristics and properties of their fired products
Abstract The physicochemical, mineralogical and technological properties of clayey materials from the Ndop plain (NW Cameroon) have been investigated, for their ceramic applications. The clayey materials have mixed facies with colour ranging from...
2016 / Rose Yongue-Fouateu, Frankline Ndimukong, André Njoya, Frankline Kunyukubundo, Paul Kemeng Mbih -
The Technology Transfer Systems in Communities, Product Versus Processes
Abstract Based on a case study taken place in the jungle community of Santa Rita-Ecuador, we will refer on the negative and positive impacts of the technology transfer system, acknowledging the differences, seeing this as a product versus a process. ...
2016 / Villacís Enrique, Rodriguez Lorena, Ayarza Cynthia -
AFM and SEM Assessment of Lubricating Grease Microstructures: Influence of Sample Preparation Protocol, Frictional Working Conditions and Composition2016 / C. Roman, C. Valencia, J. M. Franco
-
Driving Factors of SO2 Emissions in 13 Cities, Jiangsu, China
Abstract With the air pollution getting worse, reducing pollutant emissions has become an important issue in environmental governance nowadays. This paper analyzes the driving factors of SO2 emissions in Jiangsu Province, China, using Logarithmic...
2016 / Yizhong Wang, Qunwei Wang, Ye Hang -
Ultrahigh-efficiency solution-processed simplified small-molecule organic light-emitting diodes using universal host materials2016 / T.-H. Han, M.-R. Choi, C.-W. Jeon, Y.-H. Kim, S.-K. Kwon, et al.
-
An Overview of 200 kW Solar Power Plant Based on Organic Rankine Cycle
Abstract Solar-driven ORC-based distributed energy system (DES) is a potential integration energy solution for sustainable development of low carbon community. A 200 kW ORC DES system was demonstrated in Tianjin for a combined supply of power,...
2016 / Jianyuan Zhang, Li Zhao, Jue Wen, Shuai Deng -
Sterilization techniques for biodegradable scaffolds in tissue engineering applications2016 / Z. Dai, J. Ronholm, Y. Tian, B. Sethi, X. Cao
-
Synthesis and optical properties of red/blue-emitting Sr2MgSi2O7:Eu3+/Eu2+ phosphors for white LED
Abstract Phosphor-converted white light emitting diodes (white LEDs) have received great attention in recent years since they have several excellent features such as high lumen output, low power consumption, long lifetime and environmentally...
2016 / Tong Thi Hao Tam, Nguyen Duy Hung, Nguyen Thi Kim Lien, Nguyen Duc Trung Kien, Pham Thanh Huy -
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation2016 / Ryosuke Matsuzaki, Masahito Ueda, Masaki Namiki, Tae-Kun Jeong, Hirosuke Asahara, et al.
-
Radio Frequency Coplanar ZnO Schottky Nanodiodes Processed from Solution on Plastic Substrates2016 / James Semple, Stephan Rossbauer, Claire H. Burgess, Kui Zhao, Lethy Krishnan Jagadamma, et al.
-
Improved fracture behavior and microstructural characterization of thin tungsten foils
Abstract This study is focused towards the development of the technique for investigating the fracture behaviour of 100µm thick rolled tungsten foils, with a purity of 99.97%. Electron backscatter diffraction (EBSD) scans reveal that the grains are...
2016 / Vladica Nikolic, Stefan Wurster, Daniel Firneis, Reinhard Pippan -
Unique Crystallization of Fullerenes: Fullerene Flowers2016 / Jungah Kim, Chibeom Park, Intek Song, Minkyung Lee, Hyungki Kim, et al.
-
Development of a sintering methodology through abnormal glow discharge for manufacturing metal matrix composites2016 / S Pérez, Y Pineda, A Sarmiento, A López