Materials engineering topic list of research papers
-
A mathematical model for the simulation of the formation and the subsequent regression of hypertrophic scar tissue after dermal wounding2016 / Daniël C. Koppenol, Fred J. Vermolen, Frank B. Niessen, Paul P. M. van Zuijlen, Kees Vuik
-
Short-crack modelling of the effect of corrosion pits on the fatigue limit of 12% Cr steel2015 / G. Härkegård
-
Improved antimicrobial property and controlled drug release kinetics of silver sulfadiazine loaded ordered mesoporous silica
Abstract The present study deals with the loading of silver sulfadiazine into ordered mesoporous silica material by post-impregnation method and its effect on the in vitro release kinetics and antimicrobial property of the drug. The formulated...
2016 / Suman Jangra, Sunita Devi, Vijay K. Tomer, Vinod Chhokar, Surender Duhan -
Theoretical substantiation choice of “comfortable” air temperature in industrial premises2016 / Mikhail A. Ulchiekov, Elena E. Bulba
-
Ni ion damage structures and hardness changes in austenitic stainless steels and their model alloys2016 / K Sato, S. Ishioka, Q Xu, T Yoshiie, H Tsuchida, et al.
-
High Performance Cutting (HPC) in the New Era of Digital Manufacturing – A Roadmap
Abstract We are rapidly moving into the new era of digitisation, into an era of the Massive Internet of Things - towards the Gigabit Society and towards 5G Technology. The implications are truly far reaching. Rapid transformation through the...
2016 / G. Byrne, E. Ahearne, M. Cotterell, B. Mullany, G.E. O’Donnell, et al. -
Status of HgCdTe Barrier Infrared Detectors Grown by MOCVD in Military University of Technology2016 / M. Kopytko, K. Jóźwikowski, P. Martyniuk, W. Gawron, P. Madejczyk, et al.
-
Quantum wire-on-well (WoW) cell with long carrier lifetime for efficient carrier transport2016 / Masakazu Sugiyama, Hiromasa Fujii, Takumi Katoh, Kasidit Toprasertpong, Hassanet Sodabanlu, et al.
-
Synthesis, investigation on structural and electrical properties of cobalt doped Mn–Zn ferrite nanocrystalline powders2016 / M. Bhuvaneswari, S. Sendhilnathan, M. Kumar, R. Tamilarasan, N.V. Giridharan
-
Effect of solidification rate on the coarsening behavior of precipitate in rapidly solidified Al-Si alloy
Abstract The gas-atomized Al-Si alloy powder with different particle sizes was subjected to isothermal annealing for understanding the effect of solidification rate on precipitation and growth Si crystals. The results show that Si precipitates grew...
2016 / Zhiyong Cai, Chun Zhang, Richu Wang, Chaoqun Peng, Ke Qiu, et al. -
Lattice pulling effect and strain relaxation in axial (In,Ga)N/GaN nanowire heterostructures grown on GaN-buffered Si(111) substrate2015 / X. Kong, S. Albert, A. Bengoechea-Encabo, M. A. Sanchez-Garcia, E. Calleja, et al.
-
Laser Touch Dressing of Electroplated CBN Grinding Tools
Abstract In this paper, an alternative process for dressing electroplated cBN grinding wheels using an ultrashort pulsed laser is presented. Other than abrasive grains dressed conventionally, laser touch dressed cBN grains exhibit cutting edges that ...
2016 / J. Pfaff, M. Warhanek, S. Huber, T. Komischke, F. Hänni, et al. -
tgcd: An R package for analyzing thermoluminescence glow curves
Abstract Thermoluminescence (TL) glow curves are widely used in dosimetric studies. Many commercial and free-distributed programs are used to deconvolute TL glow curves. This study introduces an open-source R package tgcd to conduct TL glow curve...
2016 / Jun Peng, ZhiBao Dong, FengQing Han -
An ARM-based Multi-channel CNC Solution for Multi-tasking Turning and Milling Machines
Abstract ARM-based CNC systems are used as a low-cost solution for controlling 2-3 axis machines. The increase of computing power of ARM processors facilitated their application to controlling multi-tasking and multi-axis machines with several...
2016 / Sergej N. Grigoriev, Georgi M. Martinov -
Seismic Retrofitting of a Process Column Using Friction Dampers
Abstract During seismic reevaluation of a process column, it was found that anchor bolts are not adequate for the present seismic load. A retrofitting scheme using friction dampers of 30kN capacity has been worked out for its qualification. Double...
2016 / A. Ravi Kiran, M.K. Agrawal, G.R. Reddy -
Cyclic degradation of titanium–tantalum high-temperature shape memory alloys — the role of dislocation activity and chemical decomposition2015 / T. Niendorf, P. Krooß, C. Somsen, R. Rynko, A. Paulsen, et al.
-
Simulation on the Shock Response of Vehicle Occupant Subjected to Underbelly Blast Loading
Abstract Explosion from an anti-tank mines or improvised explosive devices are recognized as one of the lethal threat towards occupants inside an armoured vehicle. The detonation of these threats creates high intensity blast waves that were...
2016 / Khalis Suhaimi, Risby Mohd Sohaini, Tan Kean Sheng, Victor Feizal Knight -
Improved Surface Integrity from Cryogenic Machining of Ti-6Al-7Nb Alloy for Biomedical Applications
Abstract Ti-6Al-7Nb alloy is emerging as an alternative biomedical material for replacing Ti-6Al-4V alloy used in dental implants and femoral stem prosthesis applications. In cryogenic machining using liquid nitrogen, the...
2016 / Y. Sun, B. Huang, D.A. Puleo, J. Schoop, I.S. Jawahir -
Effects of Post Annealing on I-V-T Characteristics of (Ni/Au)/Al0.09Ga0.91N Schottky Barrier Diodes2016 / Abdullah Akkaya, Enise Ayyıldız
-
Grain boundary networks in nanocrystalline alloys from atom probe tomography quantization and autocorrelation mapping2015 / Ying Chen, Christopher A. Schuh