Chemical engineering topic list of research papers
-
Effect of Bed Characters on the Direct Synthesis of Dimethyldichlorosilane in Fluidized Bed Reactor2015 / Pan Zhang, Ji H. Duan, Guang H. Chen, Wei W. Wang
-
Mass transfer and power characteristics of stirred tank with Rushton and curved blade impeller
Abstract Present work compares the mass transfer coefficient (kLa) and power draw capability of stirred tank employed with Rushton and curved blade impeller using computational fluid dynamics (CFD) techniques in single and double impeller cases....
2016 / Thiyam Tamphasana Devi, Bimlesh Kumar -
Fabrication And Properties Of Silver Based Multiwall Carbon Nanotube Composite Prepared By Spark Plasma Sintering Method2015 / M. Lis, A. Wrona, J. Mazur, C. Dupont, M. Kamińska, et al.
-
Shear-induced enhancements of crystallization kinetics and morphological transformation for long chain branched polylactides with different branching degrees2016 / Junyang Wang, Jing Bai, Yaqiong Zhang, Huagao Fang, Zhigang Wang
-
A modified oxic-settling-anaerobic activated sludge process using gravity thickening for excess sludge reduction2015 / Jun Wang, Shi-Yu Li, Feng Jiang, Ke Wu, Guang-Li Liu, et al.
-
Increased Yield of Biotransformation of Androsta-1, 4-Dien-3, 17-Dione from Β-Sitosterol by Using Sulfobutyl Ether-Β-Cyclodextrin Complexation Technique2016 / Jingwen Wang, Shimin Guan, Baoguo Cai, Shuo Zhang, Shulin Yang, et al.
-
Low Thermal Pretreatment as Method for Increasing the Bioavailability of Organic Matters in Domestic Mixed Sludge2016 / Roslinda Seswoya, Ahmad Tarmizi Abdul Karim
-
Mathematical Model for the Simulation of the Syngas Methanation Process
Abstract With rapid population growth there is an increased trend of global energy consumption. On a global scale most of the energy supply is currently generated by fossil fuels with all the subsequent consequences including depletion of...
2016 / Inese Tilla, Elina Dace -
Does the canopy mixing layer model apply to highly flexible aquatic vegetation? Insights from numerical modelling2016 / Timothy I. Marjoribanks, Richard J. Hardy, Stuart N. Lane, Daniel R. Parsons
-
Evaluation of Detached Eddy Simulations for predicting the flow over periodic hills2007 / S. Šarić, S. Jakirlić, M. Breuer, B. Jaffrézic, G. Deng, et al.
-
Mathematical Model of Two Phase Flow in Natural Draft Wet-Cooling Tower Including Flue Gas Injection2016 / Tomáš Hyhlík
-
Análisis de la estructura perovskita LaxSr1-xCryMn1-yO3-δ con potencial aplicación como ánodo para celdas de combustible de óxido sólido
Resumen Las celdas de combustible de óxido sólido (SOFC) son complejos dispositivos que ofrecen grandes ventajas sobre la manera convencional en la que se produce la energía eléctrica. Muchas de estas ventajas giran alrededor del impacto...
2016 / José Juan Alvarado Flores -
Mesoporous Silica Gel–Based Mixed Matrix Membranes for Improving Mass Transfer in Forward Osmosis: Effect of Pore Size of Filler2015 / Jian-Yuan Lee, Yining Wang, Chuyang Y. Tang, Fengwei Huo
-
Calculation of effective transport properties of partially saturated gas diffusion layers
Abstract A large number of currently available Computational Fluid Dynamics numerical models of Polymer Electrolyte Membrane Fuel Cells (PEMFC) are based on the assumption that porous structures are mainly considered as thin and homogenous layers,...
2016 / Tomasz Bednarek, Georgios Tsotridis -
Modelling of a tubular membrane contactor for pre-combustion CO2 capture using ionic liquids: Influence of the membrane configuration, absorbent properties and operation parameters
Abstract A membrane contactor using ionic liquids (ILs) as solvent for pre-combustion capture CO2 at elevated temperature (303–393 K) and pressure (20 bar) has been studied using mathematic model in the present work. A comprehensive two-dimensional...
2016 / Zhongde Dai, Muhammad Usman, Magne Hillestad, Liyuan Deng -
Condition Monitoring of Orifice in Abrasive Waterjet Cutting System Using High Pressure Sensor
Abstract The health of orifice plays an important role in the performance of any abrasive waterjet injection system. The condition of orifice is quasi-static since its geometry changes with time due to the erosive nature of water jet. This results...
2016 / J. John Rozario Jegaraj, N. Ramesh Babu -
Temperature control based on ANFIS
Abstract The greenhouse is a complicated nonlinear system, which provides the plants with appropriate environmental conditions for growing. This paper presents a design of a control system for a greenhouse using geothermal energy as a power source...
2016 / Doaa M. Atia, Hanaa T. El-madany -
A comparative study of MEA and DEA for post-combustion CO2 capture with different process configurations2016 / Boyang Xue, Yanmei Yu, Jian Chen, Xiaobo Luo, Meihong Wang
-
Investigation of Y/SBA Composite Molecular Sieves Morphology Control and Catalytic Performance for n-Pentane Aromatization2016 / Chun-Wei Shi, Wen-Yuan Wu, Shuai Li, Xue Bian, Shan-lin Zhao, et al.
-
Extraction of heavy metals from aqueous solutions in a modified rotating disc extractor2016 / B. A. Amer, M. H. Abdel-Aziz, E.- S. Z. El-Ashtoukhy, N. K. Amin