Chemical engineering topic list of research papers
-
n-Heptane hydroconversion over sulfated-zirconia-supported molybdenum carbide catalysts2016 / F. F. Oloye, A. J. McCue, J. A. Anderson
-
The thermo-mechano-chemical twin-screw reactor, a new perspective for the biorefinery of sunflower whole plant: aqueous extraction of oil and other biopolymers, and production of biodegradable fiberboards from cake2016 / Philippe Evon, Virginie Vandenbossche, Laurent Labonne, Justine Vinet, Pierre-Yves Pontalier, et al.
-
Super square carbon nanotube network: a new promising water desalination membrane2016 / Ligang Sun, Xiaoqiao He, Jian Lu
-
Removal of Iron and Manganese Using Cascade Aerator and Limestone Roughing Filter2016 / Azrin Mohd Sanusi, Mohd Nordin Adlan, M. A. Z. Mohd Remy Rozainy, Rhahimi Jamil
-
A study on pressure-driven gas transport in porous media: from nanoscale to microscale2016 / Yoshiaki Kawagoe, Tomoya Oshima, Ko Tomarikawa, Takashi Tokumasu, Tetsuya Koido, et al.
-
Dynamical crossover line in supercritical water2015 / Yu. D. Fomin, V. N. Ryzhov, E. N. Tsiok, V. V. Brazhkin
-
On the retrofitting and repowering of coal power plants with post-combustion carbon capture: An advanced integration option with a gas turbine windbox
Abstract Retrofitting a significant fraction of existing coal-fired power plants is likely to be an important part of a global rollout of carbon capture and storage. For plants suited for a retrofit, the energy penalty for post-combustion carbon...
2016 / Maria Sanchez del Rio, Jon Gibbins, Mathieu Lucquiaud -
Discrete element simulation and experimental study of powder spreading process in additive manufacturing
Abstract Powders used in additive manufacturing (AM) are spread onto a compact layer of particles for sintering and this process is repeated layer by layer to form the final products. Spreading of rod-shaped particles in realistic AM settings is...
2016 / S. Haeri, Y. Wang, O. Ghita, J. Sun -
Experimental validation of the distributed drag method for simulating large marine current turbine arrays using porous fences
Abstract Marine current energy conversion can provide significant electrical power from resource-rich sites. However since no large marine current turbine arrays currently exist, validation of methods for simulating energy extraction relies upon...
2016 / D.S. Coles, L.S. Blunden, A.S. Bahaj -
Modelling methane production kinetics of complex poultry slaughterhouse wastes using sigmoidal growth functions
Abstract The kinetic evaluation of the methane potential from poultry slaughterhouse waste streams was performed using modified sigmoidal bacterial growth curve equations (Richards, logistic, Gompertz) in order to investigate their suitability to...
2016 / Aidan Ware, Niamh Power -
Photo-reduction of Hexavalent Chromium in Aqueous Solution in the Presence of TiO 2 as Semiconductor Catalyst2013 / M. F. Ghorab, R. Djellabi, R. Messadi
-
Solid Oxide Fuel Cells coupled with a biomass gasification unit2016 / Marek Skrzypkiewicz, Michał Wierzbicki, Michał Stępień
-
Isolation, screening and identification of mercury resistant bacteria from mercury contaminated soil2016 / Anna Kowalczyk, Magdalena Wilińska, Marek Chyc, Monika Bojko, Dariusz Latowski
-
Magnetic resonance velocity imaging of gas flow in a diesel particulate filter
Abstract Magnetic resonance (MR) velocity imaging has been used to investigate the gas flow in a diesel particulate filter (DPF), with sulphur hexafluoride (SF6) being used as the MR-active gas. Images of the axial velocity were acquired at ten...
2016 / Nicholas P. Ramskill, Andrew P.E. York, Andrew J. Sederman, Lynn F. Gladden -
Removal of Phosphate from Aqueous Solution Using Alginate/Iron (III) Chloride Capsules: a Laboratory Study2016 / Hanna Siwek, Artur Bartkowiak, Małgorzata Włodarczyk, Katarzyna Sobecka
-
Generic flowsheet model for early inventory estimates of industrial microbial processes. II. Downstream processing
Abstract To ensure optimal process flowsheet selection it is valuable to conduct environmental and economic comparisons at an early stage of technology selection and process design. However, the data that is needed to perform these studies are not...
2016 / K.G. Harding, S.T.L. Harrison -
The Use of the Visualisation of Multidimensional Data Using PCA to Evaluate Possibilities of the Division of Coal Samples Space Due to their Suitability for Fluidised Gasification2016 / Dariusz Jamróz, Tomasz Niedoba, Agnieszka Surowiak, Tadeusz Tumidajski
-
Deposition and Characterization of the Titanium-Based Coating by a Multi-Chamber Detonation Sprayer2015 / M.Yu. Arseenko, Yu.N. Tyurin, M.S. Prozorova, M.G. Kovaleva, V.Yu. Novikov, et al.
-
A Buffer Analysis in a Transfer Production Line2016 / Yonlanan Chomnawung, Suksan Prombanpong, Chanakarn Klavohm
-
Nano-electro-mechanical pump: Giant pumping of water in carbon nanotubes2016 / Amir Barati Farimani, Mohammad Heiranian, Narayana R. Aluru