Chemical engineering topic list of research papers
-
Quantifying complexity in metabolic engineering using the LASER database
Abstract We previously introduced the LASER database (Learning Assisted Strain EngineeRing, https://bitbucket.org/jdwinkler/laser_release) (Winkler et al. 2015) to serve as a platform for understanding past and present metabolic engineering...
2016 / James D. Winkler, Andrea L. Halweg-Edwards, Ryan T. Gill -
Development of hydrophobic platinum catalyst for oxidation of tritium in JAEA
Abstract To design a recombiner packed with hydrophobic catalyst for passive tritium oxidation, the development of manufacturing technology for hydrophobic platinum catalyst and the following analysis on reaction rate are essential. This...
2016 / Yasunori Iwai, Yuki Edao, Hiroo Asahara, Takumi Hayashi -
Engineering of Baeyer-Villiger monooxygenase-based Escherichia coli biocatalyst for large scale biotransformation of ricinoleic acid into (Z)-11-(heptanoyloxy)undec-9-enoic acid2016 / Joo-Hyun Seo, Hwan-Hee Kim, Eun-Yeong Jeon, Young-Ha Song, Chul-Soo Shin, et al.
-
A novel insight into membrane fouling mechanism regarding gel layer filtration: Flory-Huggins based filtration mechanism2016 / Qian Lei, Meijia Zhang, Liguo Shen, Renjie Li, Bao-Qiang Liao, et al.
-
Effect of operating parameters on production of bio-oil from fast pyrolysis of maize stalk in bubbling fluidized bed reactor2016 / Najaf Ali, Mahmood Saleem, Khurram Shahzad, Sadiq Hussain, Arshad Chughtai
-
Investigating Intra-Tablet Coating Uniformity With Spectral-Domain Optical Coherence Tomography2016 / Yue Dong, Hungyen Lin, Vahid Abolghasemi, Lu Gan, J. Axel Zeitler, et al.
-
Treatment of high salt oxidized modified starch waste water using micro-electrolysis, two-phase anaerobic aerobic and electrolysis for reuse2016 / Xuenong Yi, Yulin Wang
-
Thermal post-treatment alters nutrient release from a controlled-release fertilizer coated with a waterborne polymer2015 / Zijun Zhou, Changwen Du, Ting Li, Yazhen Shen, Jianmin Zhou
-
Preparation of Chamottes as a Raw Material for Low-Cost Ceramic Membranes2016 / Maria-Magdalena Lorente-Ayza, Maria-Jose Orts, Ana Gozalbo, Sergio Mestre
-
Experimental Investigation of the Original Project of Yukari Kaleköy Dam and Hydroelectric Power Plant Spillway
Abstract Hydraulic model tests of the spillway of Yukarı Kaleköy Dam and Hydroelectric Power Plant (HPP) were carried out at Hydromechanics Laboratory of Middle East Technical University (METU), Ankara. In order to investigate the flow conditions in ...
2016 / Mustafa Gogus, A. Burcu Altan-Sakarya, Mete Koken -
Analyzing a turbulent pipe flow via the one-point structure tensors: Vorticity crawlers and streak shadows
Abstract Efforts to identify and visualize near-wall structures typically focus on the region y + ...
2016 / F.S. Stylianou, R. Pecnik, S.C. Kassinos -
Removal and recovery of vanadium from alkaline steel slag leachates with anion exchange resins
Abstract Leachable vanadium (V) from steel production residues poses a potential environmental hazard due to its mobility and toxicity under the highly alkaline pH conditions that characterise these leachates. This work aims to test the efficiency...
2016 / Helena I. Gomes, Ashley Jones, Mike Rogerson, Gillian M. Greenway, Diego Fernandez Lisbona, et al. -
Hydrothermal Oxidation of Fecal Sludge: Experimental Investigations and Kinetic Modeling2016 / Tobias Hübner, Markus Roth, Frédéric Vogel
-
Gravimetric analysis of selecteD types of Biofuels2014 / Zuzana Mikulová, Ivan Vitázek, Janko Klúčik
-
Ultra scale-down approaches to enhance the creation of bioprocesses at scale: impacts of process shear stress and early recovery stages
The sensitivity of biological materials to shear stress conditions encountered during large-scale bioprocessing makes successful scale up from the bench challenging. Ultra scale-down technologies seek to use just millilitre quantities to enhance our understanding...
2016 / Andrea CME Rayat, Alex Chatel, Mike Hoare, Gary J Lye -
Integration of Multi-Stage Membrane Carbon Capture Processes to Coal-Fired Power Plants using highly permeable polymers
Abstract Membrane separation systems could be a feasible option as post combustion carbon capture technologies in coal-fired power plants. Recent advancement on membrane materials based on microporous super glassy polymers could improve...
2016 / Maria-Chiara Ferrari, Davide Bocciardo, Stefano Brandani -
Inverted Gabor holography principle for tailoring arbitrary shaped three-dimensional beams2016 / Tatiana Latychevskaia, Hans-Werner Fink
-
A cohesive granular material with tunable elasticity2016 / Arnaud Hemmerle, Matthias Schröter, Lucas Goehring
-
Effect of Chemical Compounds in Tidal Water on Asphalt Pavement Mixture
Abstract Roads along North coastal area of Java Island (Indonesia) often receive special attention due to their bad performance as a result of the presence of tidal inundation. Past researches indicated that the tidal water was a compound of...
2016 / Bagus Hario Setiadji, Sudarno Utomo, Nahyo -
Analysis of Optimal Process Flow Diagrams of Light Naphtha Isomerization Process by Mathematic Modelling Method2016 / Vjacheslav Chuzlov, Konstantin Molotov