Mechanical engineering topic list of research papers
-
Benchmark Numerical Simulations of Viscoelastic Fluid Flows with an Efficient Integrated Lattice Boltzmann and Finite Volume Scheme2015 / S. Zou, X. Xu, J. Chen, X. Guo, Q. Wang
-
Effect of Density and Pointed Corner Degree of Pore on Local Stress in Welded Structures: Defect in Marine Structures2014 / Farida Bouafia, Boualem Serier, Nassim Serier, Sardar Sikandar Hayat
-
Work Criteria Function of Irreversible Heat Engines2014 / Mahmoud Huleihil
-
Experimental study of bond-slip performance of corroded reinforced concrete under cyclic loading2015 / H. Zhou, J. Lu, X. Xv, Y. Zhou, F. Xing
-
The study of spontaneous combustion region partition and nitrogen injection effect forecast based on CFD method
Abstract In order to understand the contribution of spontaneous combustion dangerous region under U type ventilation in gob area, mathematical model describing air flow and temperature heating was established according to mass, momentum and energy...
2011 / Zhu Hongqing, Liu Pengfei, Liu Xingkui -
Typical Failure Analysis and Processing of Belt Conveyor
Abstract The paper analyzes two typical failure forms of roller and conveyor at the belt conveyor, and describes the maintenance methods of prevention and elimination failures to ensure the normal operation of belt conveyor. ...
2011 / Lihua Zhao -
Study on Flow Frictional Characteristics of Bi-Metal Lining Pipes
Abstract The application of bi-metal lining pipes is more and more extensive because of low cost and resistance to corrosion. The inner diameter of bi-metal lining pipe decreases 1mm∼8mm as compared to carbon steel pipe. It's necessary to reevaluate ...
2011 / Zang Guojun, Zeng Dezhi, Jiang Yong, Liu Fei, Zhu Dajiang, et al. -
The relationship of the traditional drawing education with technology and graphic design
Abstract Drawing, one of the basic disciplines that are used in all fields of plastic arts, is an important step consisting of the applications related to drawing in the process of art training. One who has gained the ability of analysis/solution,...
2010 / Banu Bulduk -
Jacobian free monotonic descent algorithm for forward kinematics of spatial parallel manipulator2016 / G. Shen, Y. Tang, J. Zhao, H. Lu, X. Li, et al.
-
Lithium-ion battery remaining useful life prediction based on grey support vector machines2015 / X. Li, J. Miao, J. Ye
-
Vibrations of Three-Layered Cylindrical Shells with FGM Middle Layer Resting on Winkler and Pasternak Foundations2012 / Abdul Ghafar Shah, Aalia Ali, Muhmmad Nawaz Naeem, Shahid Hussain Arshad
-
Study on Power Train of Two Axles Four Wheel Drive Electric Vehicle
Abstract This paper is focused on design of a power train for two-axle four-wheel-drive (4WD) electric vehicle (EV). The purpose is to improve the energy efficiency, driving stability for an Utility Vehicle (UV) that is original equipped with a...
2012 / Yu Chih-Hsien, Tseng Chyuan-Yow, Chang Chih-Ming -
Vibration analysis of structural elements using differential quadrature method
Abstract The method of differential quadrature is employed to analyze the free vibration of a cracked cantilever beam resting on elastic foundation. The beam is made of a functionally graded material and rests on a Winkler–Pasternak foundation. The...
2012 / Mohamed Nassar, Mohamed S. Matbuly, Ola Ragb -
A general solution to the identification of moving vehicle forces on a bridge2008 / A. González, C. Rowley, E. J. OBrien
-
Development of X-Y Servo Pneumatic-Piezoelectric Hybrid Actuators for Position Control with High Response, Large Stroke and Nanometer Accuracy2010 / Mao-Hsiung Chiang
-
Reprint of:Modeling Tonal and Broadband Interaction Noise
Abstract The fan interaction noise is modeled as an annular cascade in terms of the Euler equations linearized about a nonuniform rotational flow. The model accounts for the inflow-fan-duct coupling and the high frequency of the interaction process. ...
2010 / H.M. Atassi, M.M. Logue -
Time Resolved PIV Investigation on the Skin Friction Reduction Mechanism of Outer-Layer Vertical Blades Array2015 / S. H. Park, N. H. An, H. S. Yoon, H. Park, H. H. Chun, et al.
-
Investigation of Thermal Effects on Machining Chatter Using FEM Simulation of Chip Formation
Abstract Chatter vibration is a major cause of limitations in increasing material removal rate in machining. Machining chatter is caused by the interaction between tool and work-piece. Various nonlinear phenomena in the machining process affect the...
2012 / Mohammad S. Hajmohammadi, Mohammad R. Movahhedy -
Design and Flow Parameters Calculation of the Turbomachine Channels
Abstract The flow calculation method and design procedure of axisymmetric channels of turbomachines are presented in the paper. On the basis of the presented procedure, a special computer program has been developed. To confirm the adequacy of the...
2012 / Mykola Kalinkevych, Oleksandr Gusak, Andriy Skoryk, Oleg Shcherbakov -
Investigation of Hydraulic Characteristics of a Volute-type Discharge Passage based on CFD
Abstract The internal flow patterns of a volute-type discharge passage were investigated in a mixed-flow pumping system based on CFD by using the RNGturbulence model to close the time-averaged Navier-Stokes equations. According to the numerical...
2012 / Honggeng Zhu, Rentian Zhang, Guoqiang Luo, Bin Zhang