Mechanical engineering topic list of research papers
-
Research on modeling technology for a high altitude airship
Abstract According of the force and motion characteristics of the high altitude airship, a six-degree-of-freedom nonlinear dynamic model is presented. On the basis of the model, the digital simulation is carried out. The motion parameters of the...
2011 / Fang Xi-long, Liu Xin-xue, Wang Fang, Liu Kai-feng -
Experimental determination of correlations for average heat transfer coefficients in heat exchangers on both fluid sides2013 / Dawid Taler
-
A numerical and experimental study of natural convective heat transfer from an inclined isothermal square cylinder with an exposed top surface2013 / Abdulrahim Kalendar, Patrick H. Oosthuizen
-
Dynamic modeling in PHP
Abstract The modeling of various phenomena is used mainly in technology and science. The dynamic model, visualization of phenomena with models and animations make it easier for students to understand the examined problem. By changing one parameter...
2011 / Petr Sládek, Jan Válek -
Analysis of Tool-wear and Cutting Force Components in Dry, Preheated, and Cryogenic Machining of NiTi Shape Memory Alloys
Abstract The present study focuses on tool-wear behaviour and cutting forces in machining of NiTi shape memory alloys (SMAs) under various machining conditions, namely dry, preheated, and cryogenic cooling at three different cutting speeds. Obtained ...
2013 / Y. Kaynak, H.E. Karaca, R.D. Noebe, I.S. Jawahir -
The theory and framework of integration design of building consumption efficiency based on BIM
Abstract Presently in China many challenges are existing in building energy efficiency, such as the detachment between building design and its energy efficiency, the complicated working process on building efficiency design, the difficulty for...
2011 / Yan Yuan, Jingling Yuan -
Temperature effects on the vibration characteristics of a functionally graded thick beam
Abstract This paper presents the effect of material-temperature dependent on the vibrational characteristics of a functionally graded (FG) thick beam by using finite element method. The beam is modeled by higher order shear deformation theory...
2012 / Amal E. Alshorbagy -
Preliminary Research on Porous Foam Ceramics Against Gas Explosions In Goaf
Abstract Gas explosion is one of the most serious accidents threatening the safety of the coal mines in China. The goaf, especially the upper corner, tends to accumulate methane and leak air, which constitutes a potential gas explosion source....
2011 / Zhang Dong, Nie Baisheng, Wang Chao, Zhao Fei, Guo Jianhua, et al. -
Experimental study of an instantaneous-heating air source heat pump water heater with a temperature stratified water tank2016 / Mingjing Lei, Hua Zhang, Fang Wang, Xiaokuan You
-
A study of the influence of processing parameters and tool wear on elastic displacements of the technological system under face milling2017 / D. Yu. Pimenov, V. I. Guzeev, T. Mikolajczyk, K. Patra
-
The effect of feed-in-tariff supporting schemes on the viability of a district heating and cooling production system
Abstract Combined cooling, heat and power systems represent an efficient alternative to supply heating and cooling demand compared to conventional boilers and air conditioner systems. However, considering the high level of upfront investment and the ...
2017 / Juan Pablo Jiménez Navarro, José Manuel Cejudo López, David Connolly -
Analysis of thermo-mechanical coupling of high-speed angular-contact ball bearings2017 / Zhenhuan Ye, Liqin Wang, Guanci Chen, Di Tang
-
Exhaust Gas Temperature Measurements in Diagnostics of Turbocharged Marine Internal Combustion Engines Part II Dynamic Measurements2016 / Zbigniew Korczewski
-
Safe Human-Robot Cooperation in an Industrial Environment2013 / Nicola Pedrocchi, Federico Vicentini, Malosio Matteo, Lorenzo Molinari Tosatti
-
Operation-based Configuration Complexity Measurement for Manufacturing System
Abstract Configuration not only determines the material flow pattern but also influences the production cost in a manufacturing system. The diversity of the products and growing demands for system flexibility increases the complexity of the...
2017 / Fan Guoliang, Li Aiping, Moroni Giovanni, Xu Liyun, Liu Xuemei -
The Influence of Oil Pressure in the Engine Lubrication System on Friction Losses
Abstract The purpose of the internal combustion engine lubrication system is to provide optimal conditions for the oil film formation in all friction couples, such as a piston-cylinder, piston rings-cylinder, main bearings, etc. The oil film is...
2017 / Ewa Rostek, Maciej Babiak, Emil Wróblewski -
Control system design of flying-wing UAV based on nonlinear methodology
Abstract In this paper, A fluid vector rudder flying-wing UAV is employed as the design object, so as to study the nonlinear design method and flight validation. For the maneuvering flight control, this paper presents a control structure. This...
2017 / Ji-guang LI, Xin CHEN, Ya-juan LI, Rong ZHANG -
Performance Comparison of the Optimized Inverted Joined Wing Airplane Concept and Classical Configuration Airplanes2016 / Adam Sieradzki, Adam Dziubiński, Cezary Galiński
-
Influence on friction from piston ring design, cylinder liner roughness and lubricant properties
Abstract The piston rings are responsible for a large portion of the fuel consumption in heavy duty diesel engines. In this work a high speed component test rig for evaluation of piston ring friction is used. A number of different piston rings and...
2017 / Markus Söderfjäll, Hubert M. Herbst, Roland Larsson, Andreas Almqvist -
Experimental and theoretical studies on heat and mass transfer in anti-condensation coatings2012 / Andrzej Grzebielec, Artur Rusowicz