Mechanical engineering topic list of research papers
-
Prognostics of Lithium-Ion Batteries Based on Battery Performance Analysis and Flexible Support Vector Regression2014 / Shuai Wang, Lingling Zhao, Xiaohong Su, Peijun Ma
-
Buoyant Unstable Behavior of Initially Spherical Lean Hydrogen-Air Premixed Flames2014 / Zuo-Yu Sun, Guo-Xiu Li, Hong-Meng Li, Yue Zhai, Zi-Hang Zhou
-
System for Road Vehicle Energy Optimization Using Real Time Road and Traffic Information2014 / Felipe Jiménez, Wilmar Cabrera-Montiel
-
Determination of transient fluid temperature using the inverse method2014 / Magdalena Jaremkiewicz
-
Operational Reliability Assessment of Compressor Gearboxes with Normalized Lifting Wavelet Entropy from Condition Monitoring Information2015 / Xiaoli Zhang, Baojian Wang, Hongrui Cao, Bing Li, Xuefeng Chen
-
A method for designing lightweight and flexible creep-age forming tools using mechanical splines and sparse controlling points2015 / Aaron C. L. Lam, Zhusheng Shi, Jianguo Lin, Xia Huang, Yuansong Zeng, et al.
-
Wear phenomena of grinding wheels with sol–gel alumina abrasive grains and glass–ceramic vitrified bond during internal cylindrical traverse grinding of 100Cr6 steel2014 / Krzysztof Nadolny
-
Study on the Design of Supersonic Axisymmetric Multicompression and Quasi-isentropic Inlets
Abstract Based on the characteristics method, the design method of axisymmetric multi-compression and quasi-isentropic compression inlets are developed. For the multi-compression inlets, the solution strategy of shock wave angle for the leasttotal...
2015 / Jiang Yunsong, Gao Zhenxun, Jiang Chongwen -
Modelling of Engine Performance Fuelled with Second Generation Biodiesel
Abstract Increasing interest in diesel engine technology and the continuous demand of finding alternative sustainable fuels as well as reducing emissions has motivated over the years for the development of numerical models, to provide qualitatively...
2014 / C.A. Harch, M.G. Rasul, N.M.S. Hassan, M.M.K. Bhuiya -
Electrochemical machining of burn-resistant Ti40 alloy
Abstract This study investigates the feasibility of using electrochemical machining (ECM) to produce critical aeroengine components from a new burn-resistant titanium alloy (Ti40), thereby reducing costs and improving efficiency relative to...
2015 / Zhengyang Xu, Jia Liu, Dong Zhu, Ningsong Qu, Xiaolong Wu, et al. -
A Flexible Three-in-One Microsensor for Real-Time Monitoring of Internal Temperature, Voltage and Current of Lithium Batteries2015 / Chi-Yuan Lee, Huan-Chih Peng, Shuo-Jen Lee, I-Ming Hung, Chien-Te Hsieh, et al.
-
Wheel Torque Distribution of Four-Wheel-Drive Electric Vehicles Based on Multi-Objective Optimization2015 / Cheng Lin, Zhifeng Xu
-
Experiment and Simulation Study on the Amorphous Silicon Photovoltaic Walls2014 / Wenjie Zhang, Bin Hao, Nianping Li
-
Heat Flux Sensors for Infrared Thermography in Convective Heat Transfer2014 / Giovanni Carlomagno, Luigi de Luca, Gennaro Cardone, Tommaso Astarita
-
Effect of Operating Conditions on the Performance of Adsorption Solar Cooling Run by Solar Collectors
Abstract Adsorption solar cooling appears to have prospect in the tropical countries. The present study investigates the effect of operating conditions on the performance of solar powered adsorption chiller for the climatic condition of Dhaka...
2013 / Rifat Ara Rouf, K. C. Amanul Alam, M. A. Hakim Khan -
Research on Trust Model of Sensor Nodes in WSNs
Abstract A trust model of sensor nodes in WSNs that named AEMP is proposed. AEMP means ‘Addition Encouragement, Multiplication Punishment’. Compared with current other models, AEMP works with simple calculation and needs fewer resources. The paper...
2012 / Gu Xiang, Qiu Jianlin, Wang Jin -
3D Mesh Model and Its Cylindrical Image
Abstract In order to render three-dimensional virtual scenes more realistically, One often needs to draw images of objects which are reflected by the cylindrical surface mirror. Doing so, we first define the cylindrical image model as the set of...
2011 / Huang Jianmin, Liu Ping, Lv Yang -
Research on the subjective weight of the risk assessment in the coal mine system based on GSPA-IAHP
Abstract The risk assessment index system is usually established in the coal mine system, and contributes of different indexes are reflected by their weights. AHP is one of the most common methods, but experts are difficult to make accurate judgment ...
2011 / Li De-shun, Xu Kai-li -
Motion Control System using SERCOS over EtherCAT
Abstract SERCOS interface (SErial Real time COmmunication Specification) is known as a universal ‘motion control’ interface, while EtherCAT (Ethernet for Control and Automation Technology) is a high-speed, real-time, topology-flexible industrial...
2011 / Hu Xing, Huan Jia, Liu Yanqianga -
Vehicle occupant classification algorithm based on T-S fuzzy model
Abstract One of the critical logic deployment challenges faced by intelligent airbag system is whether the system can accurately determine the type of the occupant sitting in different postures. The main objective of this paper is the application of ...
2011 / Zhenhai Gao, Yang Zhao