Mechanical engineering topic list of research papers
-
Distributed System for Crossroads Traffic Surveillance with Prediction of Incidents
Abstract The development of traffic surveillance systems is one of the crucial tasks in intelligent urban surveillance. The visual tracking techniques become more complex with a high computational cost. At the same time, they provide the wide...
2014 / Margarita Favorskaya, Euvgenii Kazmiruk, Aleksei Popov -
Toward mass production of microtextured microdevices: linking rapid prototyping with microinjection molding2014 / Andrés Díaz Lantada, Volker Piotter, Klaus Plewa, Nicole Barié, Markus Guttmann, et al.
-
Effect of Combustion Heat Release on the Stability of Confined Boundary/Mixing-layer Confluent Flow
Abstract The issue of mixing enhancement of the fuel and oxidizer in the combustor of a ramjet has received more and more attention. Various injection ways were designed and justified to improve the mixing process by producing more multiplescale...
2015 / Liu Zhiyong, Shang Qing, Liu Xiaoyong, Fei Lisen, Liu Fengjun -
Active control of time-delay in cutting vibration
Abstract The system dynamics of turning processes can be described by a delay differential equation. How to improve the stability and suppress the vibration of cutting is of an interesting topic. In this paper, a multiple time-delay controller is...
2013 / Pingxu Zheng, Xinhua Long -
Investigation on effect of Yttria Stabilized Zirconia coated piston crown on performance and emission characteristics of a diesel engine
Abstract Experimental investigation is carried out under different loading conditions in a three cylinder diesel engine with its piston crown coated with Yttria Stabilized Zirconia (YSZ) to understand the influence of the thermal barrier coating...
2014 / G. Sivakumar, S. Senthil Kumar -
Dynamic Pricing of Fashion-Like Multiproducts with Customers’ Reference Effect and Limited Memory2014 / Mengqi Liu, Wenjie Bi, Xiaohong Chen, Guo Li
-
Implementation and Performance of a GPS/INS Tightly Coupled Assisted PLL Architecture Using MEMS Inertial Sensors2014 / Youssef Tawk, Phillip Tomé, Cyril Botteron, Yannick Stebler, Pierre-André Farine
-
Current studies on air distributions in commercial airliner cabins
Abstract Air distribution in commercial airliner cabins is very important for the comfort and health of passengers and crew. Experimental measurements, computational fluid dynamics (CFD) simulations, and inverse modeling are state-of-the-art methods ...
2013 / Wei Liu, Qingyan Chen -
Quaternion-Based Unscented Kalman Filter for Accurate Indoor Heading Estimation Using Wearable Multi-Sensor System2015 / Xuebing Yuan, Shuai Yu, Shengzhi Zhang, Guoping Wang, Sheng Liu
-
Equivalent Plate Modeling for Complex Wing Configurations
Abstract A multi-plate model based on Ritz method and penalty function technique is developed to model complex wing configurations formed by wing segments in different planes. Each wing segment is modeled as a plate element basing on the first-order ...
2012 / Youxu Yang, Zhigang Wu, Chao Yang -
Research on Power Saving Positive Torque and Constant Power Pumping Unit and Tracking Technique System
Abstract Based on the analysis of the negative torque of the common beam pumping unit resulting in lower system efficiency, energy consumption, load alternating amplitude, poor working conditions, the theory of pumping unit with positive torque is...
2012 / Jinchao Xu, Juhui Li, Jian Chen, Mei Han, Xiuting Han, et al. -
Experimental Study on Inhibiting the Gas and Coal Dust Explosion by Water Mist in Tube with Obstacle
Abstract The ordinary water mist has well affected on suppression and extinguishment flame, but the ability of physical extinguishment is influenced by the surrounding environment. The roadway in coal mine is very complex. So the related experiments ...
2011 / Li Zhen-feng, Cao Shao-long, An An, Hu Peng -
Comprehensive welding technology for type 304 stainless steel rotating shaft
Abstract To control effectively welding deformation and intergranular corrosion for type304 stainless steel. This study proposed a comprehensive welding technology, which consists of rational design of welding pro-cess, correct choice of welding...
2011 / ZUO Shilun, ZHOU Xiong, ZHANG Gang -
Quantitative Modeling of Coupled Piezo-Elastodynamic Behavior of Piezoelectric Actuators Bonded to an Elastic Medium for Structural Health Monitoring: A Review2010 / Guoliang Huang, Fei Song, Xiaodong Wang
-
An overview of a unified theory of dynamics of vehicle–pavement interaction under moving and stochastic load2013 / Lu Sun
-
Molecular Momentum Transport at Fluid-Solid Interfaces in MEMS/NEMS: A Review2009 / Bing-Yang Cao, Jun Sun, Min Chen, Zeng-Yuan Guo
-
Wire electrochemical machining with axial electrolyte flushing for titanium alloy
Abstract Titanium and its alloys have found very wide application in aerospace due to their excellent characteristics although their processing is still a challenge. Electrochemical machining is an important issue in the fabrication of titanium and...
2013 / Ningsong Qu, Xiaolong Fang, Wei Li, Yongbin Zeng, Di Zhu -
Comparative Study of the Effect of the Parameters of Sizing Data on Results by the Meshless Methods (MLPG)2013 / Ahmed Moussaoui, Touria Bouziane
-
Preliminary Design of a Multi-Column TLP Foundation for a 5-MW Offshore Wind Turbine2012 / Yongsheng Zhao, Jianmin Yang, Yanping He
-
Influence of Plant Steam System on Thermal Economy of Thermal Power Plant and Energy Strategy
Abstract When the unit is under normal operating, the steam source of plant-steam is from the fourth steam extraction of turbine. But at the low load operating condition, during the process that the steam source of plant steam switches to reheat...
2012 / Yong Li, Ying-ying Wen