Mechanical engineering topic list of research papers
-
A hybrid press system: Motion design and inverse kinematics issues
Abstract A hybrid machine (HM) is a system integrating two types of motor; servo and constant velocity with a mechanism. The purpose is to make use of the energy in the system efficiently with a flexible system having more than one degree of freedom ...
2016 / M. Erkan Kütük, L. Canan Dülger -
Analysis of Vehicle Speed Change at Non-signalized Crosswalks Based on Driving Behavior
Abstract The probability of accidents at crosswalks in the city depends more on vehicles’ speed. Drivers’ behavior, therefore, is of great significance. The study aims to reveal the interrelationship between vehicle speed and the onset of yielding...
2016 / Tianyi Wang, Xiaobei Jiang, Wuhong Wang, Qian Cheng -
A Modified Sequential Multilateration Scheme and its Application in Geometric Error Measurement of Rotary Axis
Abstract Geometric error compensation becomes an essential technology for improving the accuracy of multi-axes machine tools. Laser tracker has been has been considered as an enabling instrument which can be used to measure the geometric error of...
2015 / Zhang Zhenjiu, Ren Mingjun, Liu Mingjun, Wu xinmin, Chen yuanbo -
Analysis of modal frequency optimization of railway vehicle car body2016 / W. Sun, J. Zhou, D. Gong, T. You
-
Extension classification method for low-carbon product cases2016 / Y. Zhao, S. Ren, H. Hong, H. Wang
-
Status of testing field for ocean energy generation2015 / Yongqiang ZHU, Lihu JIA, Chunming DUAN, Xiaoyan SUN, Wenrui GUO
-
Effects of Pre-Lift Intake Valve Strategies on the Performance of a DISI VVA Turbocharged Engine at Part and Full Load Operation
Abstract In the paper, the potentialities offered by an advanced valve lift design are numerically analyzed. In particular, the study is carried out by a 1D approach and regards the characterization of a VVA strategy named “pre-lift” applied to a...
2015 / V. De Bellis, A. Gimelli, M. Muccillo -
Study on the damage mechanism of articular cartilage based on the fluid-solid coupled particle model2015 / J. Hong, T. M. Evans, P. L. Mente
-
Learning vector quantization neural network-based model reference adaptive control method for intelligent lower-limb prosthesis2016 / J.-Q. Yang, L. Yang, Y. Ma
-
Planetary gearbox fault feature enhancement based on combined adaptive filter method2015 / S. Tian, Z. Qian
-
An extended displacement discontinuity method for analysis of stress wave propagation in viscoelastic rock mass
Abstract An extended displacement discontinuity method (EDDM) is proposed to analyze the stress wave propagation in jointed viscoelastic rock mass (VRM). The discontinuities in a rock mass are divided into two groups. The primary group with an...
2011 / L.F. Fan, F. Ren, G.W. Ma -
Composite control for raymond mill based on model predictive control and disturbance observer2016 / D. Niu, X. Chen, J. Yang, X. Wang, X. Zhou
-
Dynamic Characteristics Analysis of Power Shift Control Valve2014 / F. Ren, X. Liu, J. Chen, P. Zeng, B. Liu, et al.
-
Design and experimental research of an improved stick-slip type piezo-driven linear actuator2015 / J. Li, H. Zhao, M. Shao, X. Zhou, Z. Fan
-
Bubble-bubble interaction effects on dynamics of multiple bubbles in a vortical flow field2016 / B. Cui, B. Ni, Q. Wu
-
Multiple Solutions of Problems in Fluid Mechanics by Predictor Optimal Homotopy Asymptotic Method2014 / A. K. Alomari, N. R. Anakira, I. Hashim
-
Optimization Study on the Heat Transfer Area of the Sewage Source Heat Pump System Based on Year-round Coefficient of Performance
Abstract Based on simulation model of the sewage source heat pump system (SSHPS), weigh the influence of coefficient of performance under different work conditions, the ACOP was defined and as the optimization function, with the heat exchange areas...
2015 / Zhaoyi Zhuang, Guitao Li, Yong Zhang, Yongbin Li -
Second Law Analysis of Al2O3-Water Nanofluid Turbulent Forced Convection in a Circular Cross Section Tube with Constant Wall Temperature2013 / V. Bianco, O. Manca, S. Nardini
-
On the Emissivity and Absorptivity of Plastic Shading Nets under Natural Conditions2015 / A. M. Abdel-Ghany, I. M. Al-Helal, M. R. Shady
-
Development of a trajectory following vehicle control model2016 / E. Uzunsoy, V. Erkilic