Mechanical engineering topic list of research papers
-
Thruster fault identification method for autonomous underwater vehicle using peak region energy and least square grey relational grade2015 / M. Zhang, B. Yin, X. Liu, J. Guo
-
Dynamic prediction and compensation of aerocraft assembly variation based on state space model2015 / Yujun Cao, Xin Li, Zhixiong Zhang, Jianzhong Shang
-
Research on Driver Behavior in Yellow Interval at Signalized Intersections2014 / Zhaosheng Yang, Xiujuan Tian, Wei Wang, Xiyang Zhou, Hongmei Liang
-
Modeling of Wire Electrochemical Micromachining
Abstract Wire electrochemical micromachining (WECMM) is a promising method for the fabrication of various metal parts. In recent years, WECMM has attracted increasing interest, especially for treatment of complex-shaped microworkpieces. By now, the...
2015 / V.M. Volgin, V.V. Lyubimov, V.D. Kukhar, A.D. Davydov -
Comparison of Two Kinds of Indirect Evaporative Cooling System: To Produce Cold Water and To Produce Cooling Air
Abstract Indirect evaporative cooling system to produce cold water and indirect evaporative cooling system to produce cooling air are compared in this paper. From the process transformation, to remove the same quantity of indoor heat, the indirect...
2015 / Xiaoyun Xie, Yi Jiang -
Drag Reduction of a Pipe Flow Using Nata de Coco Suspensions2014 / S. Ogata, Gunawan, J. Warashina, Yanuar
-
Effect of Air-excess on Blends of RON70 Partially Premixed Combustion2015 / Shuli Wang, P. C. Bakker, L. M. T. Somers, L. P. H. de Goey
-
Extreme Air-gap Response Below Deck of Floating Structures2010 / Jing Li, Zhenhua Huang, Soon Tan
-
Comparative analysis for traffic flow forecasting models with real-life data in Beijing2015 / Y. Rong, X. Zhang, X. Feng, T.-k. Ho, W. Wei, et al.
-
Study on the characteristics of a homemade differential-velocity-type compliant joint for robotic manipulators2015 / J.-S. Hu, C.-H. Wu, Y.-J. Tsai, C.-H. Kuo
-
Forming mechanism of radial V-shaped microgrooves on plate using step punching method2015 / X. Jian-hua, D. Ji-an, Z. Chun-liang, L. Gui-yun, Z. Chao, et al.
-
Driver fixation region division-oriented clustering method based on the density-based spatial clustering of applications with noise and the mathematical morphology clustering2015 / S.-w. Li, Y. Xu, W.-c. Sun, Z.-f. Yang, L.-h. Wang, et al.
-
Experimental Study of a Liquid Dehumidification Unit Integrated in a CCHP System with Varying Operating Condition
Abstract A LiCl liquid absorption dehumidification unit was integrated into a 50kW experimental platform, which is a combined cold, heat and power (CCHP) distributed energy system (DES). The dehumidification process was driven by using the engine's...
2015 / Runhua Jiang, Frank G.F. Qin, Xiaoxi Yang, Simin Huang, Baiman Chen, et al. -
Effects of liquid morphology and distribution on the apparent properties of porous media made of stacked particles2015 / M. Yu, X. Fan, T. S. K. W. Ranasinghe, L. Wang
-
DiamondTorre GPU Implementation Algorithm of the RKDG Solver for Fluid Dynamics and its Using for the Numerical Simulation of the Bubble-shock Interaction Problem
Abstract In this paper the solver based upon the RKDG method for solving three-dimensional Euler equations of gas dynamics is considered. For the numerical scheme the GPU implementation algorithm called DiamondTorre is used, which helps to improve...
2015 / Boris A. Korneev, Vadim D. Levchenko -
Modeling and simulation of a time-varying inertia aircraft in aerial refueling
Abstract Studied in this paper is dynamic modeling and simulation application of the receiver aircraft with the time-varying mass and inertia property in an integrated simulation environment which includes two other significant factors, i.e., a...
2016 / Haitao Wang, Xinmin Dong, Jianping Xue, Jiaolong Liu, Jian Wang -
Incompressible SPH Based on Rankine Source Solution for Water Wave Impact Simulation
Abstract Smoothed Particle Hydrodynamics (SPH) is a Lagrangian meshless particle method. It was originally developed to simulate astrodynamics but has been extended to model dynamics problems with violent motions in many areas. This paper is based...
2015 / Xing Zheng, Zhenhong Hu, Qing-Wei Ma, Wen-Yang Duan -
Cyclic Biaxial Stress Measurement Method Using the Grain Growth Direction in Electrodeposited Copper Foil2010 / Yuichi Ono, Cheng Li, Daisuke Hino
-
Dynamic Characterization of Connections in Plane Frames Using SFFEM
Abstract In the construction of civil engineering structures, two or more members are often rigidly connected to increase the structural integrity. These rigid joints are often designed with bolts, rivets and welding. The actions of in-service...
2016 / Vasudev Upadhye, Mira Mitra, Sauvik Banerjee -
Investigation of the Starting Process of Free-piston Engine Generator by Mechanical Resonance
Abstract As an alternative to conventional engines, free-piston engine generator (FPEG) is a promising power generation system due to its simplicity and high thermal efficiency. One crucial technical challenge in the FPEG operation is the initial...
2015 / Boru Jia, Zhengxing Zuo, Huihua Feng, Guohong Tian, A.P. Roskilly