Mechanical engineering topic list of research papers
-
Thermodynamic and economic performance improvement of ORCs through using zeotropic mixtures: Case of waste heat recovery in an offshore platform
Abstract This paper presents a comparative thermodynamic and economic analysis of two kinds of organic Rankine cycles (ORCs) with pure and zeotropic mixtures for recovering waste heat from the exhaust gases of large diesel engines used in the...
2016 / M. Kolahi, M. Yari, S.M.S. Mahmoudi, F. Mohammadkhani -
Design and analysis of annular combustion chamber of a low bypass turbofan engine in a jet trainer aircraft
Abstract The design of an annular combustion chamber in a gas turbine engine is the backbone of this paper. It is specifically designed for a low bypass turbofan engine in a jet trainer aircraft. The combustion chamber is positioned in between the...
2016 / C. Priyant Mark, A. Selwyn -
Drivers’ Information Behavior Analysis with ATIS Equipment: A Case Study of Kunming in China
Abstract Advanced travel information system (ATIS) gives assistance to a better decision-making of trip makers. Including vehicle navigation system, mobile phone application, variable message sign (VMS), traffic radio, a series of information...
2016 / Yongming Pu, Xiaofeng Ji, Chuan Feng -
Climbing the Needs Pyramids2013 / J. C. Lomas
-
An Interactive Procedure to Preserve the Desired Edges during the Image Processing of Noise Reduction2010 / Chih-Yu Hsu, Hsuan-Yu Huang, Lin-Tsang Lee
-
Nonlinear Combustion Instabilities Analysis of Azimuthal Mode in Annular Chamber
Abstract Thermo-acoustic combustion instabilities are due to the coupling mechanism between acoustic pressure oscillations and heat release rate fluctuations. This phenomenon is of great interest because combustion instabilities cause recurrent...
2015 / Davide Laera -
Inverse Fuzzy Arithmetic for the Quality Assessment of Substructured Models
Abstract The dynamical analysis of complex structures often suffers from large computational efforts, so that the application of substructuring methods has gained increasing importance in the last years. Substructuring enables dividing large finite...
2015 / Igor Iroz, Sergio Carvajal, Michael Hanss, Peter Eberhard -
Intelligent Fixtures for High Performance Machining
Abstract Fixtures are an essential element of the machining system, being part of the precision path and force flux between process and machine tool. Intelligent fixtures enable the identification of critical process conditions, a compensation of...
2016 / Hans-Christian Möhring, Petra Wiederkehr -
Performance Estimation for Differential Pressurization Pulse Jet Engine
Abstract A novel differential pressurization pulse jet engine is suggested in this paper. Working process of the engine is firstly introduced, then several realistic assumptions are made, physical model and mathematical model of the engine's...
2015 / Zhang Jianpeng, Qin Lizi, He Miaosheng -
Chinese Journal of Cancer reviewer acknowledgement 20152016 / Rui-Hua Xu, Sarah M. Theissen
-
A numerical and experimental study on the drag of a cavitating underwater vehicle in cavitation tunnel2015 / Jung-Kyu Choi, Byoung-Kwon Ahn, Hyoung-Tae Kim
-
A time-shared machine repair problem with mixed spares under N-policy2016 / Madhu Jain, Chandra Shekhar, Shalini Shukla
-
Non-motorized Study of Supercharging Piston Engine Compressor Parameters
Abstract This article is about the features and advantages of non-motorized estimates of the unit charge parameters (especially compressor) of a combined piston engine (engine). The scheme research facility equipped with measuring and control means...
2015 / B.A. Sharoglazov, O. Mashkov, A. Martynov -
Introducing Process Building Blocks for Designing Human Robot Interaction Work Systems and Calculating Accurate Cycle Times
Abstract In comparison to classic automated solutions, the direct cooperation of human workers and industrial robots offers new potential regarding flexibility, cost and ergonomics. However advantages are mostly not obvious and only few applications ...
2016 / D. Schröter, P. Kuhlang, T. Finsterbusch, B. Kuhrke, A. Verl -
Comparison of higher-order numerical schemes and several filtering methods applied to Navier-Stokes equations with applications to computational aeroacoustics2009 / Lai, Djambazov, C.-H. Lai, Pericleous
-
Comparative analysis of gas-liquid flow in T-junction microchannels with different inlet orientations2016 / D. Liu, X. Ling, H. Peng
-
Study on Parameter Determination for ECM Equivalent Circuit and its Verification
Abstract The analysis of the electrochemical machining (ECM) model expressed by an equivalent circuit is helpful to understand the ECM characteristics, such as the removal rate and machining accuracy. Although the performance of an electrochemical...
2016 / Naoaki Nagashima, Wataru Natsu -
Graded-information feedback strategy in two-route systems under ATIS
Abstract: In consideration of the constraint of the advanced traveler information systems (ATIS) detecting accuracy and the time delay of information feedback systems, a novel approach named graded- information feedback strategy is proposed and...
2015 / Jianqiang Wang, Huimin Niu -
Study on formal modeling and verification of safety computer platform2016 / X. Wang, L. Ma, T. Tang
-
Comparative study of waste heat steam SRC, ORC and S-ORC power generation systems in medium-low temperature
Abstract For Steam Rankine Cycle (SRC), Organic Rankine Cycle (ORC) and Steam-Organic Rankine Cycle (S-ORC) power systems, in this paper, mathematical models are developed to explore the feasibility that combines the fluid-low temperature...
2016 / Xiaojun Zhang, Lijun Wu, Xiaoliu Wang, Guidong Ju