Mechanical engineering topic list of research papers
-
Experimental and Analytical Investigations on Normal and Angular Stiffness of Linear Guides in Manufacturing Systems
Abstract To find the possible error sources of manufacturing systems, the important operational characteristics of different body elements should be investigated. Stiffness is one of the most important characteristics of a machine tool's guiding...
2016 / Mahdi Rahmani, Friedrich Bleicher -
Parameters matching requirements for diesel free piston linear alternator start-up2015 / Y.-x. Li, Z.-x. Zuo, H.-h. Feng, B.-r. Jia
-
Experimental and numerical investigation of aluminium lap joints made by RFSSW2015 / Piotr Lacki, Anna Derlatka
-
Acoustic radiation analysis of topographically optimized structure using the direct boundary element method2015 / C. K. Trung, Y. DeJie
-
Optimization design and application of composite ultrasonic extraction method for effective constituents of green tea2016 / C.-C. Wang, T.-E. Lee
-
Mobility analysis of parallel mechanisms based on screw theory and mechanism topology2015 / L. Wang, H. Xu, L. Guan
-
Configuration Design of Product Service System for CNC Machine Tools2015 / Z. Sheng, T. Xu, J. Song
-
Energy dissipation characteristics of sharp-edged orifice plate2015 / A. Wanzheng
-
Remanufacturing of functional surfaces using developed ECH machine2016 / Harpreet Singh, Pramod Kumar Jain
-
Numerical simulation and experimental validation of aircraft ground deicing model2016 / B. Chen, L.-w. Wang, R. Gong, S.-k. Wang
-
Experimental study on combustion characteristics of Chinese RP-3 kerosene
Abstract In order to illustrate the combustion characteristics of RP-3 kerosene which is widely used in Chinese aero-engines, the combustion characteristics of RP-3 kerosene were experimentally investigated in a constant volume combustion chamber....
2016 / Hongan Ma, Maozhao Xie, Wen Zeng, Baodong Chen -
Experimental Study of Low-temperature Organic Rankine Cycle with Axial Flow Turbine
Abstract We build a low temperature heat recovery ORC experimental system, in which R245fa is used as working fluids, a single-stage axial flow turbine is used to generate work, and the brazed plate heat exchangers are used as evaporator and...
2015 / Chen Yue, Ying Huang, Ya Wu -
Investigation of heat transfer enhancement inside developing gravity-driven films along a vertical permeable plate subject to nonuniform suction2015 / A.-R. A. Khaled
-
Programming in the Sleptsov net language for systems control2016 / D. Zaitsev, J. Ju rjens
-
The effects of electrode size and discharged power on micro-electro-discharge machining drilling of stainless steel2016 / G. DUrso, C. Ravasio
-
Research on the kinetic energy ratio of return air entrainment in the form of low supply-middle return in the large space of brine experiments2015 / X. Wang, X. Huai, C. Huang, J. Qin
-
Effects of helix deviation on load distributions and bending stresses of continuous engaged helical gear drives2015 / T. Luo, X. Qin, J. Huang, W. Guo
-
Coupled adjoint aerostructural wing optimization using quasi-three-dimensional aerodynamic analysis2016 / Ali Elham, Michel J. L. van Tooren
-
Stress Analysis and Parameter Optimization of an FGM Pressure Vessel Subjected to Thermo-Mechanical Loadings
Abstract The thermo-mechanical behavior and material design of functionally graded materials (FGMs) has been gaining increasing attention in the past two decades. However, little work can obtain the exact solution of FGM vessel consisting of a...
2015 / Z.W. Wang, Q. Zhang, L.Z. Xia, J.T. Wu, P.Q. Liu -
Accuracy model, analysis, and adjustment in the context of multi-closed-loop planar deployable mechanisms2016 / Y. Yang, S. Xie, W. Zhang, J. Luo, H. Li