Mechanical engineering topic list of research papers
-
Navigation of autonomous mobile robot using different activation functions of wavelet neural network2015 / Pratap Kumar Panigrahi, Saradindu Ghosh, Dayal R. Parhi
-
Grouping and Sequencing of Machining Operations for High Volume Transfer Lines
Abstract Transfer lines are costly assets used for manufacturing of voluminous quantities of a dedicated discrete product following a pre- defined process plan. This paper deals with the problem of optimal grouping, sequencing and utilization of the ...
2014 / Soumitra Bhale, M. Fazle Baki, Ahmed Azab -
Numerical and experimental investigations of shape and location of vortex generators on fluid flow and heat transfer in a constant heat-fluxed rectangular duct2015 / K. J. Al-khishali, M. S. Ebaid
-
A Comparison Study of Advanced Tracking Differentiator Design Techniques
Abstract This paper presents a comparison study of four advanced tracking differentiators, including global robustexact differentiator, hybrid continuous nonlineardifferentiator, robust exact uniformly convergent arbitrary order differentiator and...
2015 / Wang Hongwei, Wang Heping -
Effect of Air-fuel Ratio on the Combustion Characteristics of Syngas (H2:CO) in Direct-injection Spark-ignition Engine
Abstract This paper presents experimental results of the effect of air-fuel ratio on the combustion characteristics of a direct-injection spark-ignition engine fuelled with a syngas of H2/CO composition of equal molar ratio. The engine was operated...
2015 / Ftwi Yohaness Hagos, A. Rashid A. Aziz, Shaharin A. Sulaiman -
Optimization of guide vane positions in bended inflow of mechanical draft wet-cooling tower2012 / Adam Klimanek, Tomasz Musioł, Adam Stechman
-
Experimental Investigation on Flow-Induced Vibration of Fuel Rods in Supercritical Water Loop2014 / Licun Wu, Daogang Lu, Yu Liu
-
Nonlinearity Analysis and Parameters Optimization for an Inductive Angle Sensor2014 / Lin Ye, Ming Yang, Liang Xu, Xiaoqi Zhuang, Zhaopeng Dong, et al.
-
Performance Analysis of Supercritical Binary Geothermal Power Plants2015 / A. Dagdas, M. T. Akkoyunlu, T. Basaran
-
An improved adaptive sampling and experiment design method for aerodynamic optimization
Abstract Experiment design method is a key to construct a highly reliable surrogate model for numerical optimization in large-scale project. Within the method, the experimental design criterion directly affects the accuracy of the surrogate model...
2015 / Jiangtao Huang, Zhenghong Gao, Zhu Zhou, Ke Zhao -
Effect of Geometry on Performance of Interlacer2014 / Qiu Hua, Fu Yu ye, Ge Mingqiao
-
The Impact of Automotive Product Remanufacturing on Environmental Performance
Abstract Remanufacturing, as an emerging industry with great potential, presents an excellent product end-of-life (EOL) alternative to extend the number of product life cycle from one to multiple. However, the procedure to quantify the environmental ...
2015 / S.S. Yang, H.Y. Ngiam, S.K. Ong, A.Y.C. Nee -
A refined element-based Lagrangian shell element for geometrically nonlinear analysis of shell structures2015 / W.-Y. Jung, S.-C. Han
-
A Mobile Robot for Fall Detection for Elderly-Care
Abstract In 2015, the population of people over the age of 65 is 25.0% in Japan. This means that Japan has already become a super-aging society. In such society, the number of elderly people living alone has been also increased. For such people, a...
2015 / Takuma Sumiya, Yutaka Matsubara, Miyuki Nakano, Midori Sugaya -
Enhancement of seal life through carbon composite back-up rings under shock loading conditions in defence applications
Abstract The life of Nitrile Butadiene Rubber (NBR) O-ring seal having shore hardness of A70 and A90 under shock loading conditions was investigated by a specially designed pneumo-hydraulic shock test rig. Shock tests have been carried out on bare...
2015 / Shankar Bhaumik, A. Kumaraswamy, S. Guruprasad -
Stochastic separated flow models with applications in numerical computations of supersonic particle-laden turbulent flows2015 / B. Wang, Z. Ren, H. Zhang
-
Manufacturing Energy Analysis of a Microchannel Heat Exchanger for High-density Servers
Abstract The power consumed by servers transforms into heat dissipated within IT equipment racks, which has led to the challenge of thermal management in data centers. This challenge has increased with the emergence of high-density servers. As heat...
2015 / Babak Lajevardi, Ian C. Garretson, Brian K. Paul, Karl R. Haapala -
Structural dynamics modification for derrick of deep well drilling rig based on experimental modal test and frequency sensitivity analysis2015 / H. Jian, Z. Sizhu, H. Lei, Y. Xinmei
-
Increasing Energy Flexibility of Manufacturing Systems through Flexible Compressed Air Generation
Abstract A continuing increase in energy supply from variable renewable energy (VRE) sources requires new strategies to match energy supply and demand. Demand response (DR) strategies focus on flexibilizing energy demand. In this context,...
2015 / Jan Beier, Sebastian Thiede, Christoph Herrmann -
Development of swashplateless helicopter blade pitch control system using the limited angle direct-drive motor (LADDM)
Abstract It can be greatly beneficial to remove the swashplate of conventional helicopter, because the swashplate is usually complicated, aerodynamically resistive, and obstacle of more complex pitch control for improving performance. The present...
2015 / Jian Wang, Haowen Wang, Chao Wu