Mechanical engineering topic list of research papers
-
Robotic Vision in Game Theme
Abstract Today, the autonomous robots are widely used to perform task in a wide variety of application. A number of research works has been carried out to examine and remove problems faced by the current robotic world. The theme of this paper is to...
2012 / Muhammad Ali Akbar, Abdul Qadir -
Design and Experimental Analyse of Low Noise Double-Pitch Silent Chain for Conveyor
Abstract In order to improve current problems of large noise of double-pitch roller chain for conveyors, and implement higher efficiency and accuracy, a new type of double pitch silent chain was proposed by the method of change some plates with...
2012 / Xiaolun Liu, Wencheng Wang, Wei Sun, Tiansong Wu, Jiajun Liu, et al. -
Modeling Deformations of the Workpiece and Removal of Material when Turning
Abstract During machining mechanical energy is dissipated into heat by frictional processes and plastic deformations of the workpiece material. Workpiece and tool are thereby subjected to thermal and mechanical loads that cause thermal expansions...
2013 / S. Schindler, M. Zimmermann, J.C. Aurich, P. Steinmann -
Application of Chevron Nozzle to a Supersonic Ejector–diffuser System
Abstract The supersonic ejector-diffuser system was widely used in many industrial applications. Recently, it is also being used as one of the most important components of the solar seawater desalination facility. That is because this system has...
2013 / Fan Shi Kong, Heuy Dong Kim, Yingzi Jin, Toshiaki Setoguchi -
Vibration Analysis Based on Empirical Mode Decomposition and Partial Least Square
Abstract Accurate detection of the ball mill load is one of the key factors to realize the automatic control of the grinding process. The shell vibration acceleration signal contains lots of useful information about the parameters of mill load,...
2011 / Jian Tang, Lijie Zhao, Heng Yue, Wen Yu, Tianyou Chai -
A Vehicular Environment Perception Platform for Safety Related Applications
Abstract The aim of this paper is to present a perception platform developed for vehicular safety applications. The work described here is part of the work carried out in the interactIVe project and more specifically inside the PERCEPTION sub...
2012 / Angelos Amditis, Panagiotis Lytrivis, Uri Iurgel, Grant Grubb, Nils Appenrodt -
Robotic execution of everyday tasks by means of external vision/force control2008 / Mario Prats, Philippe Martinet, Angel P. del Pobil, Sukhan Lee
-
Implementing Kinematic Wave Theory to Reconstruct Vehicle Trajectories from Fixed and Probe Sensor Data
Abstract A data fusion framework is examined to reproduce vehicle trajectories on urban arterials by combining probe and fixed sensor data, and signal timing parameters. The methodology is based on the kinematic wave theory and employs the...
2011 / Babak Mehran, Masao Kuwahara, Farhana Naznin -
The Research of EMF Zero-crossing Detection Method
Abstract Brushless DC motor applications are very extensive. This article is about the sensorless brushless DC motor using back EMF zero crossing detection of rotor position detection method. Proposed two kinds of terminal voltage and phase voltage...
2011 / Zhao Qi, Shen Xing-Quan, Yu Da-Guo, Yuan Bin -
A Safety Strategy for High-speed UAV Landing Taxiing Control
Abstract In terms of safety for landing taxiing control of high-speed unmanned air vechicles (UAVs), key safety-critical factors were first. A generic taxiing control logic was put forward, incorporating the concerned factors. For further...
2011 / Lu Yanhui, Zhang Shuguang, Gong Lei -
Temperature Drift Compensation for Hemispherical Resonator Gyro Based on Natural Frequency2012 / Xu Wang, Wenqi Wu, Zhen Fang, Bing Luo, Yun Li, et al.
-
Supervised feature subset selection using extended fuzzy absolute information measure for handling different discretized datasets
Abstract Feature subset selection is applied in wide range of domains like biometrics, chemistry, text processing, pattern recognition, speech processing and vision. Most of the prior work in biometrics and other applications have emphasized the...
2010 / K. Sarojini, K. Thangavel -
The influence of shot peening on the fatigue behaviour of duplex stainless steels
Abstract Stainless steel bars are currently used to reinforce large concrete structures when they need to guarantee a reliable service in saline environments. As these structures are also usually submitted to cyclic loads, their fatigue performance...
2010 / P. Sanjurjo, C. Rodríguez, I.F. Pariente, F.J. Belzunce, A.F. Canteli -
Time domain method for the prediction of pressure fluctuation induced by propeller sheet cavitation: Numerical simulations and experimental validation
Abstract This paper addresses the pressure fluctuation induced by a propeller sheet cavitation. This study applies the acoustic theory proposed by Ffowcs Williams and Hawkings to the prediction of the pressure fluctuation caused by the volume...
2013 / Hanshin Seol -
The development and application of an inviscid inverse method
Abstract A two-dimensional inviscid inverse method is developed, verified and applied in this paper. The method solves the Euler equation in absolute reference frame by a cell-centered finite volume method, and the hybrid Runge-Kutta method is used...
2013 / Jinguang Yang, Hu Wu -
Investigation of high-speed combustible gas ignited by a hot gas jetproduced in the shock tube2006 / C. Wang, Z. Y. Han, M. Situ
-
Experimental Studies on Laser-based Hot-melt Bonding of thermosetting Composites and Thermoplastics
Abstract This paper presents experimental results of joining carbon fiber (CF) reinforced thermosetting composites (TSC) to thermoplastics (TP) by means of laser-based hot-melt bonding. First of all the influence of different laser systems (λ =...
2011 / P. Amend, T. Frick, M. Schmidt -
Implementation variations of adiabatic steady PPDF flamelet model in turbulent H2/air non-premixed combustion simulation
Abstract Implementation of the adiabatic steady PPDF flamelet model involves a lot of variations including different scalar dissipation rate calculation methods and different mass diffusion models of the opposed jet flame. Four different look-up...
2015 / Qiong Li, Peiyu Zhang, Ying Feng, Peiyong Wang -
A comparative study of football aerodynamics
Abstract Ball sports are becoming faster and more demanding than ever before, pushing traditional ball designs to their limits. In order to meet the increasing performance requirements, the ball manufacturers are producing new designs progressively. ...
2010 / Firoz Alam, Harun Chowdhury, Hazim Moria, Franz Konstantin Fuss -
Analysis of the Elastic Large Deflection Behavior for Metal Plates under Nonuniformly Distributed Lateral Pressure with In-Plane Loads2012 / Jeom Kee Paik, Ju Hye Park, Bong Ju Kim