Mechanical engineering topic list of research papers
-
Combined Effects of Mechanical Availability and Storage Capacity in Pumping Station Risk Assessment
Abstract Pump failure is defined as the inability of the pump to pump at design capacity. In an urban drainage system failing pumps may result in sewer overflow and flooding. However, the system failure may be due to an unexpected rainfall event...
2014 / N. Ursino, P. Salandin -
Effect of the blade arc angle on the performance of a Savonius wind turbine2015 / Z. Mao, W. Tian
-
Numerical study on unidirectional fluid-solid coupling of Francis turbine runner2015 / K. Kan, Y. Zheng, X. Zhang, C. Yang, Y. Zhang
-
Annual acknowledgement of manuscript reviewers2015 / Siu-wai Leung
-
Automatic design algorithms for securing the ground contact stability of mobile cranes2014 / Donghoon Lee, Jun Park, Jongkwan Ho, Sunkuk Kim
-
Multifactor uncertain differential equation2015 / Shengguo Li, Jin Peng, Bo Zhang
-
Investment casting of nozzle guide vanes from nickel-based superalloys: part II – grain structure prediction2014 / Agustin Torroba, Ole Koeser, Loic Calba, Laura Maestro, Efrain Carreño-Morelli, et al.
-
Selection of suitable passive cooling strategy for a subtropical climate2014 / Ahmed-Shams Forruque Ahmed, Khan-Mohammad Masud Kamal Khan, Amanullah- Amanullah Maung Than Oo, Rasul-Mohammad Golam Rasul
-
Research on Application of Micro-Nano Acceleration Sensor in Monitoring the Vibration State of Vehicles
Abstract In order to master the real-time vibration state information of vehicles in driving process and reduce the rollover probability of vehicles. A kind of method based on micro-nano acceleration sensor of monitoring the vibration of vehicles...
2012 / Wang Qingmin, Yang Yaoen, Su Mubiao, Liu Yuhong -
Numerical Simulation of Launch Tube Based on Container–type Missile Launch Technology
Abstract According to the features of container–type missile launch technology for multi-barrel rocket, combined with non-lethal weapons in the field of application, a new concept about the launching unit for anti-riot rockets, which was the...
2012 / Jin-zhu Yang, Zhao-fei Wang -
Acoustic heating produced in the thermoviscous flow of a Bingham plastic2010 / Anna Perelomova
-
A fractal model of normal dynamic parameters for fixed oily porous media joint interface in machine tools2013 / Chongnian Qu, Liangsheng Wu, Jianfeng Ma, Qun Xia, Shuhui Ma
-
Research on Intelligent Glue-coating Robot Based on Visual Servo
Abstract At present, Glue-coating machines have some shortages, such as unintelligence, complexity of setting glue path for new parts. In this paper, real-time image capture was achieved by using digital camera technology and image processing...
2012 / Zhigang Yang, Yi An, Yanbin Sun, Jingchun Zhang -
Sensorless Direct Torque Control of Hybrid Stepper Motor Based on MRAS
Abstract In classical methods only average torque of the stepper motors is controlled which causes high speed and torque ripple. In order to control the torque instantaneously and improve the performance of the hybrid stepper motor, direct torque...
2012 / Mojtaba Khalilian, Ali Abedi, Adel Deris Zadeh -
Water-cooled Experimental Study on high-temperature Flue Pipe of Fan Mill Furnace
Abstract Pulverizing system equipped by fan mills uses “three medium” (ie. low-temperature furnace smoke, high-temperature furnace smoke, hot air) for drying coal, especially in large-scale plants burning lignite. A constantly increasing unit...
2012 / Lv Tai, Xiao-dong Wang, Qi-chun Zhu -
A Gaussian RBF Network Based Wind Speed Estimation Algorithm for Maximum Power Point Tracking
Abstract This paper proposes a Gaussian radial basis function network (GRBFN) based wind speed estimation algorithm for maximum power point tracking (MPPT) of wind power generation system (WPGS). A specific design of the proposed control algorithm...
2011 / Lei Tian, Qiang Lu, Wen-zhuo Wang -
An ultrasonic air pump utilizing acoustic streaming
Abstract The ultrasonic air pump with a bending vibrator and a reflector was discussed. Simulation method to calculate the acoustic streaming in the air gap of the pump is important for the design. We suggest three methods to analyze the acoustic...
2010 / Wada Yuji, Koyama Daisuke, Nakamura Kentaro, Nishikawa Masato, Nakagawa Tatsuyuki, et al. -
An Experimental Investigation on the Characteristics of Cylindrical Plunge Dry Grinding with Structured cBN Wheels
Abstract This paper proposes a new innovative concept approaching the optimum cylindrical plunge dry grinding. The concept is based on the individual dressing operation in order to create designed structures on the grinding wheel surface....
2012 / Taghi Tawakoli, Uwe Heisel, Dal Ho Lee, Amir Daneshi -
Application of Regression and Fuzzy Logic Method for Prediction of Tool Life
Abstract This paper presents a model for predicting tool life when end milling IS2062 steel using P30 uncoated carbide tipped tool under various cutting conditions. A tool life model is developed from regression model obtained by using results of...
2012 / J. Gokulachandran, K. Mohandas -
The compression effect on aerodynamic properties of sports fabrics
Abstract Generally, the surface textures of the sport fabrics influence the aerodynamic properties of the athletes in motion. On the other hand, the surface texture of sports garments largely depends on the applied stress while wearing. Therefore,...
2012 / Hazim Moria, Firoz Alam, Harun Chowdhury, Aleksandar Subic