Mechanical engineering topic list of research papers
-
Editorial: Recent developments of experimental mechanics methods and their applications in engineering2011 / Huimin Xie
-
Fiber Alignment and Straightening in Opening for Open-End Spinning2007 / S. Ulku, M. Acar, T.G. King, B. Ozipek
-
Design of Compensation Coils for EMI Suppression in Magnetostrictive Linear Position Sensors2012 / Yongjie Zhang, Weiwen Liu, Jinfeng Yang, Chunfeng Lv, Hui Zhao
-
Chip Thickness and Microhardness Prediction Models during Turning of Medium Carbon Steel2007 / S. A. Alrabii, L. Y. Zumot
-
Vehicle Unpaved Road Response Spectrum Acquisition Based on Accelerometer and GPS Data2012 / Nan Cong, Jianzhong Shang, Yanxi Ren, Yao Guo
-
Aircraft Fan Noise Reduction Technology Using Leaned Stator Blades
Abstract The experimental investigation of leaned bypass stator vanes impact on the fan model acoustic and aerodynamic performance was carried out for the purpose of noise reduction technology development for advanced turbofan engine. It was...
2015 / Yaroslav Pochkin, Yuri Khaletskiy -
Optimization of power and heating systems based on a new hybrid algorithm
Abstract A novel combination of Particle Swarm Optimization (PSO) and Genetic Algorithm (GA) is applied on a base case cogeneration optimization problem called the modified CGAM problem with two objective functions. The first objective function, the ...
2015 / M.J. Mahmoodabadi, A.R. Ghavimi, S.M.S. Mahmoudi -
A Study of the Integrated Automated Emotion Music with the Motion Gesture Synthesis via ZigBee Wireless Communication2013 / Chih-Fang Huang, Wei-Po Nien
-
Roller bearing dynamics under transient thermal-mixed non-Newtonian elastohydrodynamic regime of lubrication2015 / M. Mohammadpour, P. Johns-Rahnejat, H. Rahnejat
-
Systematic Angle Random Walk Estimation of the Constant Rate Biased Ring Laser Gyro2013 / Huapeng Yu, Wenqi Wu, Meiping Wu, Guohu Feng, Ming Hao
-
Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine
Abstract Combined with the use of renewable energy sources for its production, hydrogen represents a possible alternative gas turbine fuel within future low emission power generation. Due to the large difference in the physical properties of...
2015 / A. Haj Ayed, K. Kusterer, H.H.-W. Funke, J. Keinz, C. Striegan, et al. -
Flow-driven rotor simulation of vertical axis tidal turbines: A comparison of helical and straight blades2015 / Tuyen Quang Le, Kwang-Soo Lee, Jin-Soon Park, Jin Hwan Ko
-
CFD Simulations to Determine Wave Forces on a Row of Cylinders
Abstract The open source Computational Fluid Dynamics (CFD) model REEF3D is used to simulate interaction of low steepness linear waves and high steepness 5th-order Stokes waves with a single cylinder and linear arrays of two, three, four and five...
2015 / Arun Kamath, Hans Bihs, Mayilvahanan Alagan Chella, Øivind A. Arntsen -
A simulation-based optimization approach for passenger train timetabling with periodic track maintenance and stops for praying2015 / Zahra Bahramian, Morteza Bagheri
-
Changes of the thermodynamic parameters in failure conditions of the micro-CHP cycle2014 / Robert Matysko, Jarosław Mikielewicz, Eugeniusz Ihnatowicz
-
Exact 3D solutions and finite element 2D models for free vibration analysis of plates and cylinders2014 / Salvatore Brischetto, Roberto Torre
-
Inner Attitude Integration Algorithm Based on Fault Detection for Strapdown Inertial Attitude and Heading Reference System
Abstract This article proposes a new inner attitude integration algorithm to improve attitude accuracy of the strapdown inertial attitude and heading reference system(SIAHRS), which, by means of a Kalman filter, integrates the calculated attitude...
2010 / Liu Jianye, Zhu Yanhua, Lai Jizhou, Yu Yongjun -
Redesign of an 11 cm-diameter Micro Diffuser
Abstract In order to improve the performances of an 11 cm-diameter turbine engine, this article suggests to substitute a new-style micro diffuser redesigned based on a new concept for the traditional diffuser having poor performances. The new...
2010 / Chen Jie, Huang Guoping -
Influence of Tolerancing Methods and Aspects of Perceived Quality on Side Closures of Luxury Cars
Abstract For a customer, one of the most appealing areas aesthetically in a passenger vehicle is the frontal and side closure of the vehicle. Especially the way the precision tolerances are achieved in cars. Hence the precision tolerance gives the...
2016 / Karthick Jayaram, Jayanthraj Mohanraj -
An Extended Small-grid Lattice Gas Model for Pedestrian Counter Flow
Abstract In this paper, an extended small-grid lattice gas model is built up for pedestrian counter flow. A previous experimental work is used to compare with the extended model A simulation results to select the key parameters. The result shows...
2013 / Jing Liang, Yongfeng Zhang, Juntao Yang