Mechanical engineering topic list of research papers
-
Robust product design and process planning in using process capability analysis2013 / Angus Jeang
-
An Evaluation of New Procedures for Testing Explosion Arresters
The paper first outlines the practical need for explosion arresters, including pressures arising from recent legislation. The nature of pipeline explosions is then considered, including the problem of potential transition to detonation together with the...
2002 / G.O. Thomas, A. Teodorczyk -
Numerical Simulation of Duct-vented Gas Explosion
Abstract Duct-vented gas explosion was simulated based on k-ɛ turbulence model and Eddy-Dissipation-Concept (EDC) model in this paper. Flame propagation process during venting was studied to analyze the mechanisms of the severer explosion severity...
2011 / Ping Tang, Juncheng Jiang -
Comparative Study of High Speed Machining of Inconel 718 in Dry Condition and by Using Compressed Cold Carbon Dioxide Gas as Coolant
Abstract Difficult-to-cut materials like Inconel 718 are used for aerospace, steam turbine, bearing industry, nuclear and automotive applications. In machining, friction and heat generation at the cutting zone are the frequent problems, which affect ...
2014 / N.G. Patil, Ameer Asem, R.S. Pawade, D.G. Thakur, P.K. Brahmankar -
Experimental investigation of erosion-corrosion phenomena in a steel fitting due to plain and slurry seawater flow2014 / Mohamed Shehadeh, Mohammed Anany, Khalid M Saqr, Ibrahim Hassan
-
A novel multi-fidelity coupled simulation method for flow systems
Abstract For the numerical simulation of flow systems with various complex components, the traditional one-dimensional (1D) network method has its comparative advantage in time consuming and the CFD method has its absolute advantage in the detailed...
2013 / Peng Wang, Yun Zheng, Zhengping Zou, Lei Qi, Zhixiang Zhou -
Modeling a Thermomechanical NC-Simulation
Abstract This paper presents a method for a NC-Simulation based prediction of shape errors caused by thermal expansions in machining of complex workpieces. In the first part of the paper the basic approach of modeling a thermomechanical...
2013 / B. Denkena, A. Schmidt, J. Henjes, D. Niederwestberg, C. Niebuhr -
Technologies for gas turbine power generation with CO2 mitigation
Abstract A review of the state of the art gas turbine power plants designs with CO2 capture was performed to set up a list of technologies to be considered in a conceptual process superstructure. It has been found that the efficiency and economics...
2011 / Peter Jansohn, Timothy Griffin, Ioannis Mantzaras, Francois Marechal, Frank Clemens -
Comparison of two methods of improving dehumidification in air conditioning systems: Hybrid system (refrigeration cycle –rotary desiccant) and heat exchanger cycle
Abstract The objective of this research is evaluating and comparing two methods of improving dehumidification in air conditioning systems. The two methods are the hybrid system: (refrigeration cycle – rotary desiccant) and the heat exchanger cycle....
2011 / Marderos Aar Sayegh, Mohammad Hammad, Zakwan Faraa -
Wireless Sensor Node for Surface Seawater Density Measurements2012 / Federico Baronti, Gabriele Fantechi, Roberto Roncella, Roberto Saletti
-
Angle Estimation of Simultaneous Orthogonal Rotations from 3D Gyroscope Measurements2011 / Sara Stančin, Sašo Tomažič
-
Development of a Stereo Vision Measurement System for a 3D Three-Axial Pneumatic Parallel Mechanism Robot Arm2011 / Mao-Hsiung Chiang, Hao-Ting Lin, Chien-Lun Hou
-
Thermally Induced Asymmetric Buckling of Circular Monolayer Graphene2013 / Haw-Long Lee, Win-Jin Chang
-
Metamodel-Based Multidisciplinary Design Optimization of a Deep-Sea Manganese Nodules Test Miner2012 / Minuk Lee, Su-gil Cho, Jong-Su Choi, Hyung-Woo Kim, Sup Hong, et al.
-
Energy Analysis and Performance Evaluation of the Adsorption Refrigeration System2013 / H. Z. Hassan
-
Hybrid Discrete Differential Evolution Algorithm for Lot Splitting with Capacity Constraints in Flexible Job Scheduling2013 / Xinli Xu, Li Li, Lixia Fan, Jing Zhang, Xuhua Yang, et al.
-
Closed Form Integration of Singular and Hypersingular Integrals in 3D BEM Formulations for Heat Conduction2012 / A. Tadeu, J. Prata, N. Simões
-
Study of Ultrasound Transmission through an Immersed Glass Plate in view of Sonochemical Reactor Design Optimisation2009 / R. Viennet, J.-Y. Hihn, M. Jeannot, R. Berriet
-
A Boundary Element Investigation of Liquid Sloshing in Coupled Horizontal and Vertical Excitation2012 / De-Zhi Ning, Wei-Hua Song, Yu-Long Liu, Bin Teng
-
Dynamic Analysis of Coolant Channel and Its Internals of Indian 540 MWe PHWR Reactor2008 / N. Dharmaraju, A. Rama Rao