Mechanical engineering topic list of research papers
-
Numerical Simulation of 3D Unsteady Flow in Centrifugal Pump by Dynamic Mesh Technique
Abstract The 3-D Dynamic Meshing technique is applied for numerical simulation of unsteady flow fields in a centrifugal pump using the Fluent software. The surface motion of the impeller computational domain was defined by the Profile file in Fluent ...
2013 / Huang Si, Yang Fuxiang, Guo Jing -
Contact Region Estimation Based on a Vision-Based Tactile Sensor Using a Deformable Touchpad2014 / Yuji Ito, Youngwoo Kim, Goro Obinata
-
A Modified Prandtl-Ishlinskii Model for Rate-dependent Hysteresis Nonlinearity Using <i>m</i>th-power Velocity Damping Mechanism2014 / Mei-Ju Yang, Chun-Xia Li, Guo-Ying Gu, Li-Min Zhu
-
A Comparative Study of Superheat Utilization Measures of Extraction Steam in Double Reheat Power Plants
Abstract The extremely high superheat degree of regenerative extraction steam in double reheat systems lead to a large temperature difference in the heat transfer process and worse thermal performance. This paper presents two typical systems that...
2015 / Luyao Zhou, Gang Xu, Yongping Yang, Shifei Zhao, Cheng Xu, et al. -
Realisation of Shear Flow at Crucial Spar Splice Joints of Composite Wing in Idealised Wing Test Box
Abstract CSIR -National Aerospace Laboratories (CSIR-NAL) has developed a patented processing technique called “Vacuum Enabled Resin Infusion Technology (VERITy” for the manufacturing of composite wing for its transport aircraft programme. The...
2014 / Polagnagu James, Kotresh Gaddikeri, Byji Varughese, M. Subba Rao -
Steady-state and transient heat transfer through fins of complex geometry2014 / Dawid Taler, Jan Taler
-
Active control for a flexible beam with nonlinear hysteresis and time delay
Abstract A new active control method is presented to attenuate vibrations of a flexible beam with nonlinear hysteresis and time delay. The nonlinear and hysteretic behavior of the system is illustrated by the Bouc—Wen model. By specific...
2013 / Kun Liu, Longxiang Chen, Guoping Cai -
Safety modeling and simulation of multi-factor coupling heavy-equipment airdrop
Abstract Heavy-equipment airdrop is a highly risky procedure that has a complicated system due to the secluded and complex nature of factors’ coupling. As a result, it is difficult to study the modeling and safety simulation of this system. The...
2014 / Jiuxing Zhang, Haojun Xu, Dengcheng Zhang, Dongliang Liu -
Service Knowledge Capture and Reuse
Abstract The keynote will start with the need for service knowledge capture and reuse for industrial product-service systems. A novel approach to capture the service damage knowledge about individual component will be presented with experimental...
2014 / R. Roy, J. Mehnen, S. Addepalli, L. Redding, L. Tinsley, et al. -
Multi-Camera and Structured-Light Vision System (MSVS) for Dynamic High-Accuracy 3D Measurements of Railway Tunnels2015 / Dong Zhan, Long Yu, Jian Xiao, Tanglong Chen
-
Performance Analysis of High-Speed Deep/Shallow Recessed Hybrid Bearing2013 / Lei Wang, Shuyun Jiang
-
An Innovative Direct-Interaction-Enabled Augmented-Reality 3D System2013 / Sheng-Hsiung Chang, Tsair-Chun Liang
-
Considering Variable Road Geometry in Adaptive Vehicle Speed Control2013 / Xinping Yan, Rui Zhang, Jie Ma, Yulin Ma
-
Research on the Thermal Cavitation Problem of a Preexisting Microvoid in a Viscoelastic Sphere2013 / Yajuan Chen, Xinchun Shang
-
Behavior-Based Formation Control of Swarm Robots2014 / Dongdong Xu, Xingnan Zhang, Zhangqing Zhu, Chunlin Chen, Pei Yang
-
Effect of Flow Blockage on the Coolability during Reflood in a 2 2 Rod Bundle2014 / Kihwan Kim, Byung-Jae Kim, Young-Jung Youn, Hae-Seob Choi, Sang-Ki Moon, et al.
-
Serum-Free Medium Optimization Based on Trial Design and Support Vector Regression2014 / Jian Xu, Fang-rong Yan, Zhi-hui Li, Deng Wang, Hai-lin Sheng, et al.
-
Research on Roll Stabilizing Based on Energy Optimization for Autonomous Surface Vehicle2014 / Hongjian Wang, Linlin Wang, Lixin Pan
-
Numerical Calculation of Effect of Elastic Deformation on Aerodynamic Characteristics of a Rocket2014 / Laith K. Abbas, Dongyang Chen, Xiaoting Rui
-
Cycle Time Reduction in Injection Molding Process by Selection of Robust Cooling Channel Design2014 / Muhammad Khan, S. Kamran Afaq, Nizar Ullah Khan, Saboor Ahmad