Mechanical engineering topic list of research papers
-
Thermodynamically Consistent Limiting Forced Convection Heat Transfer in a Asymmetrically Heated Porous Channel: An Analytical Study2013 / P. K. Mondal
-
Research on reverse logistics location under uncertainty environment based on grey prediction
Abstract This article constructs reverse logistic network based on uncertain environment, integrates the reverse logistics network and distribution network, and forms a closed network. An optimization model based on cost is established to help...
2012 / Bao Zhenqiang, Zhu Congwei, Zhao Yuqin, Pan Quanke -
A New Style Solar-driven Diffusion Absorption Refrigerator and its Operating Characteristics
Abstract In order to utilize clean energy such as solar energy to reduce electricity consumption in heating, ventilating, air conditioning and refrigerating (HVAC&R) engineering, the author developed a new style diffusion-absorption refrigerator ...
2012 / Handong Wang -
A multi-state model for wind farms considering operational outage probability2013 / Lin Cheng, Manjun Liu, Yuanzhang Sun, Yi Ding
-
Characteristics of modern soccer balls
Abstract The purpose of this study was to compare the basic aerodynamic characteristics of a previously developed 8-panel soccer ball with those of a new 32-panel soccer ball by conducting wind tunnel tests. Experimental results show that the...
2012 / Takeshi Asai, Shinichiro Ito, Kazuya Seo, Sekiya Koike -
Estimating Potential Energy Savings in Compressed Air Systems
Abstract Compressed air is typically one of the most expensive utilities in an industrial facility. While designing energy saving compressed air systems various methods are applied to reduce energy losses and minimize energy consumption. The...
2012 / Ryszard Dindorf -
Fuzzy PID Control To Feed Servo System of CNC Machine Tool
Abstract The feed servo system of CNC machine tool is a complex electromechanical coupling system. Due to the characteristics of time-varying parameters, load disturbances and motor nonlinear, it is difficult to model for the control system...
2012 / Xie Dong, Zhu Jian-qu, Wang Feng -
Influence of Abrasive Particle Movement in Micro USM
Abstract Ultrasonic machining (USM) is known for its ability of processing hard and brittle materials such as silicon, glass and ceramics. Micro USM is used to generate micro features in these materials. In micro USM, material is removed using a...
2013 / W. Pei, Z. Yu, J. Li, C. Ma, W. Xu, et al. -
Dynamic Modeling and Analysis of a 3-DOF Ultra-precision Positioning Stage with Air Bearinga
Abstract This paper presents an approach to investigate the dynamic characteristic of a 3-DOF stage. The stage is levitated by high-stiffness air bearing and the positioning accuracy can reach nanometer level. The mover of the stage, whose lowest...
2011 / Cai Tian, Zhang Ming, Zhu Yu, Hu Chuxiong -
Space-grid Method in Missile Guidance and Control
Abstract Taking guidance and control as the object, a new method named space-grid method was applied in the missile guidance in this paper. Assumed condition and basic theory were introduced firstly. The process and characteristic of the method was...
2011 / Wang Fang, Liu Xinxue, Fang Xilong, Li Yaxiong -
Study on Axial Flux Hysteresis Motors Considering Airgap Variation2010 / Mohammad Modarres, Abolfazl Vahedi, Mohammadreza Ghazanchaei
-
Adaptive, Fast Walking in a Biped Robot under Neuronal Control and Learning2007 / Poramate Manoonpong, Tao Geng, Tomas Kulvicius, Bernd Porr, Florentin Wörgötter
-
A Study on Exhaust Muffler Using a Mixture of Counter-phase Counteract and Split-gas Rushing
Abstract A conventional muffler of internal combustion engine is mostly constructed as a mixture or combination of perforated ducts, baffle or perforated baffle, expansion chamber, etc., and the noise reduction is limited and backpressure is high...
2011 / Ying-li Shao -
Safety and Airworthiness Design of Ultra-Light and Very Light Amphibious Aircrafts
Abstract Ultra-light and very light amphibious aircrafts are the special kinds of low-speed general aircrafts. They are low weighted and small sized but can takeoff and land either on land or water without changing the structure of any parts. These...
2011 / Wu Dawei, Wu Zheng, Zhang Landing, Hu Jizhong -
Subject Index2012 /
-
Parameters Decision on the Product Characteristics of a Bike Frame
Abstract Parameters decision for products that can effectively reduce costs and enhance quality play an important role in product competitiveness. This study aims to discuss the parameters decisions of a bike frame. This study first applied the...
2012 / Chien-Ping Chung, Ching-Fang Lee -
A Genetic Algorithm for Locating the Multiscale Critical Slip Surface in Jointed Rock Mass Slopes2014 / Qiang Xu, Jian-yun Chen, Jing Li, Hong-yuan Yue
-
Energy saving potential in freezing applications by applying cold thermal energy storage with solid carbon dioxide
Abstract In a time of fewer resources and rising energy prices savings of primary energy is an important goal for the food industry. This study analyses the potential of cold thermal energy storage (CTES) applying an indirect carbon dioxide system...
2012 / Armin Hafner, Tom Ståle Nordtvedt, Ingrid Rumpf -
Economic Performance Study on the Application of Ground Source Heat Pump System in Swine Farms in Beijing China
Abstract To investigate the economic performance of applying the ground source heat pump system in swine farms in Beijing China, initial investment and operating cost of ground source heat pump (GSHP) heating and cooling system, coal fired heating...
2012 / M.Z. Wang, Z.H. Wu, Z.H. Chen, J.H. Tian, J.J. Liu -
Modeling of Surface Zone Influences in Generating Gear Grinding
Abstract The complex contact and chip forming conditions complicate the characterization and analysis of cause and effect connections in generating gear grinding. Especially influences of the grinding process on the surface zone in generating gear...
2013 / Fritz Klocke, Markus Brumm, Jan Reimann