Mechanical engineering topic list of research papers
-
A Backstepping Simple Adaptive Control Application to Flexible Space Structures
Abstract Although the simple adaptive control (SAC) is widely studied both in theory and application in flexible space structure control and other control problems, it is restricted by the almost strictly positive real (ASPR) conditions. In most...
2012 / Min LIU, Shijie XU, Chao HAN -
Analysis model of parameters affecting cutting performance in high-speed machining2014 / Yung-Cheng Wang, Chi-Hsiang Chen, Bean-Yin Lee
-
Empirical Studies on Impacts of Obstacle inside Corridor on Pedestrian Flow
Abstract Empirically, pedestrian motion can be studied at various levels. At the macroscopic level one may study the basic flow parameters (like speed and density) of pedestrian motion, at the microscopic level one may track the paths followed by...
2013 / Ujjal Chattaraj, Partha Chakroborty, Arumuga Subhashini -
Dynamic analysis of C/C composite finger seal
Abstract A seal device as an important component of aeroengines has decisive influence on performance, reliability, and working life of aeroengines. With the development of aeroengines, demands on the performance characteristics of seal devices are...
2014 / Guoding Chen, Li’na Wang, Qiangpeng Yu, Hua Su -
Higher Efficiency Modeling of Surface Location Errors by Using a Multi-scale Milling Simulation
Abstract The dynamic process behavior during milling often leads to vibrations or even chatter and, thereby, to surface location errors. In this paper, a multi-scale simulation system is presented, which can predict these errors efficiently by...
2013 / S. Odendahl, P. Kersting -
Parathyroid Hormone: Effects on Glucose Homeostasis and Insulin Sensitivity in Chronic Renal Failure Patients on Regular Hemodialysis “Arabic abstracts”2013 / Nagy A.H. Sayed Ahamed, Mohamed Y. Abdul-Aziz, Aza A.B. El-Bauomy, Tamer S.I. Salem
-
An Optimization Algorithm for Multi-objective Optimization Problem by Using Envelope-dual Method
Abstract In this paper, Envelope Dual Method (EDM) is utilized to solve the optimization problem with multi-objective, multi- constraints and multi-variable for the large complex engineering system optimization design. The problem is first converted ...
2014 / X.H. Wang, C.H. Wan, C.C. Sun, R.W. Xia -
Effect of Information Provision around Signalized Intersection on Reduction of CO2 Emission from Vehicles
Abstract Unnecessary vehicle movements such as rapid acceleration/deceleration and long idling periods occur around signalized intersections, especially in urban areas. It is believed that such unnecessary vehicle movements can be reduced by...
2014 / Yukimasa Matsumoto, Tatsuya Oshima, Ruka Iwamoto -
Measurement of Diameter and Roundness on Incomplete Outline of Element with Three-lobbing Deviation
Abstract One of the most often produced and controlled elements in the engineering are shafts and holes. In many cases, they are responsible connections, requiring precise control. Measurement of a diameter or roundness deviation for the full...
2014 / Bartosz Gapinski, Michal Wieczorowski -
Friction Characteristics of Steel Pistons for Diesel Engines
The use of iron pistons is increasing due to the higher power requirements of diesel truck engines. Expansion of the iron piston is a common concern. The purpose of this study is to clarify the lubrication conditions of cast iron and steel pistons. Friction of...
2013 / Dallwoo Kim, Akemi Ito, Yasuhiro Ishikawa, Katsuyuki Osawa, Yoshiyuki Iwasaki -
Total Energy Estimation Model for Remote Laser Welding Process
Abstract The issues in the energy-efficiency process have much interest in the automotive industry. The energy criteria are also important in machine selection as well as productivity when new equipment is introduced on a shop floor. Remote laser...
2013 / Jumyung Um, Ian A. Stroud -
A Non-Uniformly Under-Sampled Blade Tip-Timing Signal Reconstruction Method for Blade Vibration Monitoring2015 / Zheng Hu, Jun Lin, Zhong-Sheng Chen, Yong-Min Yang, Xue-Jun Li
-
A Novel Identification Methodology for the Coordinate Relationship between a 3D Vision System and a Legged Robot2015 / Xun Chai, Feng Gao, Yang Pan, Chenkun Qi, Yilin Xu
-
Hybrid Model Representation of a TLP Including Flexible Topsides in Non-Linear Regular Waves2014 / Christof Wehmeyer, Francesco Ferri, Morten Andersen, Ronnie Pedersen
-
Performance Analysis of a Coal-Fired External Combustion Compressed Air Energy Storage System2014 / Wenyi Liu, Qing Li, Feifei Liang, Linzhi Liu, Gang Xu, et al.
-
A Comparative Study on Energy and Exergy Analyses of a CI Engine Performed with Different Multiple Injection Strategies at Part Load: Effect of Injection Pressure2015 / Muammer Özkan
-
On the Characteristics of Misaligned Journal Bearings2015 / Joon Jang, Michael Khonsari
-
Future crop production threatened by extreme heat2014 / Stefan Siebert, Frank Ewert
-
Using Augmented State Kalman filter to localize multi autonomous underwater vehicles2010 / Silvia Botelho, Renato Neves, Lorenzo Taddei, Vinícius Oliveira
-
A comparative study of friction factor correlations for high concentrate slurry flow in smooth pipes2015 / K. M. Assefa, D. R. Kaushal