Mechanical engineering topic list of research papers
-
Review of Bolted Connection Monitoring2013 / Tao Wang, Gangbing Song, Shaopeng Liu, Yourong Li, Han Xiao
-
Fault Diagnosis of Rotating Machinery Based on an Adaptive Ensemble Empirical Mode Decomposition2013 / Yaguo Lei, Naipeng Li, Jing Lin, Sizhe Wang
-
Computer simulation of the fire-tube boiler hydrodynamics2015 / Sergei A. Khaustov, Alexander S. Zavorin, Konstantin V. Buvakov, Vyacheslav A. Sheikin
-
Investigation on the wall function implementation for the prediction of ship resistance2015 / Sunho Park, Se Wan Park, Shin Hyung Rhee, Sang Bong Lee, Jung-Eun Choi, et al.
-
Design and Parametric Analysis of Linear Joule-cycle Engine with Out-of-cylinder Combustion
Abstract For all the existing prime movers including internal combustion engine and gas turbine, there is an inherent problem as the efficiency penalty in their micro scale applications. Crankshaft mechanism in internal combustion engine causes...
2015 / Dawei Wu, Anthony P. Roskilly -
A Group Decision-making Method based on Intuitionistic Fuzzy Set in the Three Dimensional Concurrent Engineering Environment: A Multi-O bjective Programming Approach
Abstract This paper proposes a group decision-making process by using multi-objective programming to address three-dimensional concurrent engineering (3D-CE) problems involving product, process and supply chain design. This paper uses opinion of...
2013 / H. Shidpour, A. Bernard, M. Shahrokhi -
Head Pursuit Variable Structure Guidance Law for Three-dimensional Space Interception
Abstract This article aims to develop a head pursuit (HP) guidance law for three-dimensional hypervelocity interception, so that the effect of the perturbation induced by seeker detection can be reduced. On the basis of a novel HP three-dimensional...
2008 / Ge Lianzheng, Shen Yi, Gao Yunfeng, Zhao Lijun -
A Ventral Diverterless High Offset S-shaped Inlet at Transonic Speeds
Abstract An investigation on the ventral diverterless high offset S-shaped inlet is carried out at Mach numbers from 0.600 to 1.534, angles of attack from −4° to 9.4°, and yaw angles from 0° to 8°. Results indicate: (1) a large region of low total...
2008 / Xie Wenzhong, Guo Rongwei -
A Numerical Research on a Compressibility-correlated Langtry's Transition Model for Double Wedge Boundary Layer Flows
Abstract A new compressibility correlation is introduced in the Langtry's local variable-based transition model to investigate the phenomenon on double wedge shock/boundary layer interactions. The computational analysis compared with experimental...
2011 / Xiaodong ZHANG, Zhenghong GAO -
Couplings in Multi-criterion Aerodynamic Optimization Problems Using Adjoint Methods and Game Strategies
Abstract The tighten couplings of game strategies with adjoint methods for multi-criterion aerodynamic design optimization are addressed. Its numerical implementation is also described in details. In cooperative game, adjoint methods are coupled in...
2009 / Tang Zhili, Dong Jun -
Uniform Coverage of Fibres over Open-contoured Freeform Structure Based on Arc-length Parameter
Abstract This article uses arc-length parameters for path planning to carry out robotic fibre placement (RFP) over open-contoured structures. This allows representing the initial path and offset points using an identical mathematical equation and...
2008 / Wang Xiaoping, An Luling, Zhang Liyan, Zhou Laishui -
Mechanism Modeling of Elevated Temperature Pressure Swing Adsorption Process for Pre-combustion CO2 Capture
Abstract The elevated temperature pressure swing adsorption (PSA) is a promising technology for pre-combustion CO2 capture in Integrated Gasification Combined Cycle (IGCC) power plant by taking the advantages of high partial pressure (1.0-2.0MPa) of ...
2013 / Yan Zheng, Yixiang Shi, Shuang Li, Ningsheng Cai -
Optimal Design of Water Distribution Systems Based on Entropy and Topology2014 / Salah H. A. Saleh, Tiku T. Tanyimboh
-
Cutting Fluid Influence on Thermal Behavior of 5-axis Machine Tools
Abstract Thermally induced errors on machine tools are one of the most important error sources in precision machining. Up to 75% of the overall geometrical errors on workpieces are caused by thermal errors of the machine tool [1]. The work presented ...
2014 / Josef Mayr, Michael Gebhardt, Benjamin B. Massow, Sascha Weikert, Konrad Wegener -
Influence of the Macro-topography of Grinding Wheels on the Cooling Efficiency and the Surface Integrity
Abstract The surface integrity of ground workpieces is not only influenced by the chosen parameters, but also by the coolant supply. Coolant supply in grinding is mainly governed by the nozzles used and their parameters. However, the cooling...
2014 / B. Kirsch, J.C. Aurich -
G2 Continuity Algorithms between Adjacent NURBS Patches along Common Cubic Boundary Curve
Abstract Non-uniform rational B-spline (NURBS) curves and surfaces are becoming increasingly widespread. The author have explored G 1 continuity condition between adjacent NURBS surface patches along common cubic boundary curve. ...
2011 / Xi-jun ZHOU -
Double-stage Metamodel and Its Application in Aerodynamic Design Optimization
Abstract Constructing metamodel with global high-fidelity in design space is significant in engineering design. In this paper, a double-stage metamodel (DSM) which integrates advantages of both interpolation metamodel and regression metamodel is...
2011 / Dehu ZHANG, Zhenghong GAO, Likeng HUANG, Mingliang WANG -
Young Driver Distraction: State of the Evidence and Directions for Behavior Change Programs
Abstract Adolescent drivers are overrepresented in distraction-related motor vehicle crashes. A number of potential reasons for such an elevated risk include driving inexperience, high adoption of communication technology, increased peer...
2014 / Lisa Buckley, Rebekah L. Chapman, Mary Sheehan -
Binocular Image Sequence Analysis: Integration of Stereo Disparity and Optic Flow for Improved Obstacle Detection and Tracking2008 / Yingping Huang, Ken Young
-
Analysis of the Influence of Thermal Energy Storage on the Optimal Management of a Trigeneration Plant
Abstract Safety, security, and sustainability of energy supply chains are among the main concerns of industrialized countries, and, therefore, distributed generation has significantly increased its share of the energy market, thanks to the...
2014 / Andrea L. Facci, Luca Andreassi, Stefano Ubertini, Enrico Sciubba