Mechanical engineering topic list of research papers
-
A method of multi-objective reliability tolerance design for electronic circuits
Abstract Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic...
2013 / Guofu Zhai, Yuege Zhou, Xuerong Ye, Bo Hu -
Simulation Of A Air Liquid Combined Heat Exchanger
Abstract Air liquid composite heat exchanger can implement refrigerant combined heat exchange synchronization with liquid and air heat source. This article has established steady state mathematical model of the heat exchanger, and simulation the...
2011 / Yin Liu, Guanghui Zhoua, Jing Mab -
Effects of Titanium Addition on Microstructure and Mechanical Properties of Thin-Walled Compacted Graphite Iron Castings2012 / Marcin Górny, Magdalena Kawalec
-
Computational Fluid Dynamics Based Optimal Design of Vertical Axis Marine Current Turbines
Abstract Marine turbines are being increasingly used to harness kinetic energy of water and convert it into other useful forms of energy. Widespread commercial acceptability of these machines depends upon their efficiency. This largely depends upon...
2013 / Taimoor Asim, Rakesh Mishra, Kuldip Ubbi, Karina Zala -
Control of the Supply Chain Optimization with Vehicle Scheduling of Logistics under Uncertain Systems
Abstract Vehicle routing problem to operations research theory and practice closer together production, achieved a lot in recent decades, the field of operations research in recent decades one of the most successful research. Vehicle routing problem ...
2012 / Jing Zhang -
Managing design variety, process variety and engineering change: a case study of two capital good firms2012 / Jasper Veldman, Alex Alblas
-
A Novel Neural Network-Based Technique for Smart Gas Sensors Operating in a Dynamic Environment2009 / Hakim Baha, Zohir Dibi
-
Cooling process on a run-out table by the simulation method
Abstract This study aims to determine the effective cooling parameters for the run-out table (ROT) of strip steel in a hot rolling process. Two-dimensional transient heat conduction is developed, including the external force convection and heat...
2013 / Anan Suebsomran, Suthep Butdee -
Work in Progress: Developing Tools that Support the Design of Easily Maintainable Rolling Stock
Abstract Maintenance activities strongly influence the operational availability and life cycle costs of rolling stock. To achieve an effective and efficient maintenance process, it is essential that the design of the trains and its maintenance...
2013 / W. Mulder, R.J.I. Basten, J.M. Jauregui Becker, L.A.M. Van Dongen -
Inverse and Forward Dynamic Analysis of Two Link Manipulator
Abstract In the paper we show the possibilities of physical modeling in Matlab/SimMechanics on a simple mechanical model of two link manipulator. We deal with its direct and inverse dynamics. Considering direct problem we investigate mechanical...
2012 / Peter Frankovský, Darina Hroncová, Ingrid Delyová, Peter Hudák -
Design and Experimental Study for Using PV/T Collectors in the Faculty of Mechanical Engineering University of Aleppo
Abstract In recent years building integration of solar thermal with PV modules has become more and more popular in different countries, where national support programs have accelerated the dissemination of grid connected PV systems. The installation ...
2011 / Marderos Ara Sayegh, Nabhan Khayata, Tamar Nahhas -
State of Charge Estimation Using the Extended Kalman Filter for Battery Management Systems Based on the ARX Battery Model2013 / Shifei Yuan, Hongjie Wu, Chengliang Yin
-
Analytical Solution for Free Vibrations of a Moderately Thick Rectangular Plate2013 / Ivo Senjanović, Marko Tomić, Nikola Vladimir, Dae Seung Cho
-
In Situ Monitoring of Temperature inside Lithium-Ion Batteries by Flexible Micro Temperature Sensors2011 / Chi-Yuan Lee, Shuo-Jen Lee, Ming-Shao Tang, Pei-Chi Chen
-
GPS-Supported Visual SLAM with a Rigorous Sensor Model for a Panoramic Camera in Outdoor Environments2012 / Yun Shi, Shunping Ji, Zhongchao Shi, Yulin Duan, Ryosuke Shibasaki
-
Remote Gaze Tracking System on a Large Display2013 / Hyeon Lee, Won Lee, Chul Cho, Su Gwon, Kang Park, et al.
-
Multiobjective Quantum Evolutionary Algorithm for the Vehicle Routing Problem with Customer Satisfaction2012 / Jingling Zhang, Wanliang Wang, Yanwei Zhao, Carlo Cattani
-
Circular Orbit Target Capture Using Space Tether-Net System2013 / Guang Zhai, Jing-rui Zhang, Zhang Yao
-
Thermal Transport across Solid Interfaces with Nanoscale Imperfections: Effects of Roughness, Disorder, Dislocations, and Bonding on Thermal Boundary Conductance2013 / Patrick E. Hopkins
-
Concept Layout Model of Transportation Terminals2012 / Li-ya Yao, Li-shan Sun, Wu-hong Wang, Hui Xiong